readme.txt Driver File Contents (ibm_lib_mlayr_vap918a_winsrvr_x86-64.exe)

IBM mapping layer software for OSA IPMI on x64 Windows

(C) Copyright International Business Machines Corporation 1999, 2008. All rights reserved.
US Government Users Restricted Rights - Use, duplication, or disclosure restricted by GSA
ADP Schedule Contract with IBM Corp.

Note: Before using this information and the product it supports, read the general
information in "Notices and trademarks” in this document.


CONTENTS
________
1.0  Overview
2.0  Installation and setup instructions
3.0  Configuration information
4.0  Web information and support phone number
5.0  Trademarks and Notices
6.0  Disclaimer


1.0  Overview
_____________

        1.1   This package contains IBM mapping layer software for 
              OSA IPMI drivers for x64 Windows on xSeries servers.

        1.2   Limitations

              - N/A

        1.3   Enhancements

              - N/A

        1.4   Level of Recommendations and Prerequisites for the
              Update:

              - N/A

        1.5   Dependencies:

              - Before installing this software, make sure the most
                recent OSA IPMI driver package is properly installed.
     

2.0   Installation and Removal Instructions
_________________________________________

        2.1   Attended Installation:

              - Execute the IBM mapping layer package.
                ( i.e. ibm_lib_mlayr_vap9XXa_winsvr_x86-64.exe where XX is the
                current version of the package-for-the-web .EXE file )

              - Follow the directions that appear on the screen.


	2.2   Unattended Installation:

              - Run the IBM mapping layer package with parameters as shown below,
                where XX is the current version of the package-for-the-web .EXE file.
                     
                        ibm_lib_mlayr_vap9XXa_winsvr_x86-64.exe -s

        2.3   Removal:

              - Run the IBM mapping layer package with parameters as shown below,
                where XX is the current version of the package-for-the-web .EXE file.
                     
                        ibm_lib_mlayr_vap9XXa_winsvr_x86-64.exe -s -remove
                
                
3.0   Configuration Information
_______________________________

        3.1   There are no configuration options associated with this package.


4.0     Web information and support phone number
________________________________________________

        4.1     IBM Support Web Site:

                        http://www.ibm.com/support/.
                
                For a list of supported operating systems on legacy (non-shipping)
                controllers, see:

                        http://www.ibm.com/servers/eserver/serverproven/compat/us/.

                You can receive hardware service through IBM Services or through your
                IBM reseller, if your reseller is authorized by IBM to provide warranty
                service. For support telephone numbers see:

                         http://www.ibm.com/planetwide/

                For support in the U.S. and Canada, call 1-800-IBM-SERV (1-800-426-7378).

                In the U.S. and Canada, hardware service and support is available 24 hours
                a day, 7 days a week. In the U.K., these services are available Monday
                through Friday, from 9 a.m. to 6 p.m.


        4.2     IBM eserver xSeries Web Site:

                        http://www.ibm.com/eserver/xseries

        4.3     If you have any questions about this update, or problems applying the
                update, go to the following Help Center World Telephone Numbers and URL:

                        http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html.


5.0     Notices and trademarks 
______________________________

        5.1     The following terms are trademarks of the IBM Corporation in the
                United States or other countries or both:

                -  IBM
                -  xSeries
                -  eServer

        5.2     The following terms are trademarks of the Microsoft Corporation in the
                United States or other countries or both:

                -  Windows
                -  Windows 2000
                -  Windows Server 2003


6.0     Disclaimer
__________________

        6.1     THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF
                ANY KIND.  IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS
                OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
                WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
                MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN
                THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, IBM
                GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.67