SR460AC4 SDR
Released ver 0.15
11/09/2001
-------------------------------------------------------------------------------
Release ver 0.15
Date released: 11/12/2001
SR460AC4 BMC version supported : v0.27 RC9
SDR records supported in this release:
All SDR records are supported
New record added for this release:
None
Existing record removed for this release:
None
** Notice **
Before loading this SR460AC4 SDR15 release, please make sure you have the following hardware.
Legacy board -330 and above
I/O Baseboard -320 and above
Processor board -620 and above
Failure to use the listed hardware with this SDR SR460AC4 release may result in losing
server management monitoring capability by some sensors, as well as seeing bogus SEL
entries being logged.
* Major SDR content changes *
- Modified the FAN records ordering per SMSW's request.
- Modified the processor board 3.3 V voltage conversion parameters.
-------------------------------------------------------------------------------
SR460AC4 SDR
Released ver 0.14
6/13/2001
-------------------------------------------------------------------------------
Release ver 0.14
Date released: 6/13/2001
SR460AC4 BMC version supported : v0.23 RC6
SDR records supported in this release:
All SDR records are supported
New record added for this release:
None
Existing record removed for this release:
None
** Notice **
Before loading this SR460AC4 SDR14 release, please make sure you have the following hardware.
Legacy board -330 and above
I/O Baseboard -320 and above
Processor board -620 and above
Failure to use the listed hardware with this SDR SR460AC4 release may result in losing
server management monitoring capability by some sensors, as well as seeing bogus SEL
entries being logged.
* Major SDR content changes *
- Modified the Settable and Readable mask for Legacy 3.3V sensor to remove [ul] Non-critical
threshold values.
- Modified the FAN thresholds and nominal values in support of 300 series Teedock.
- Modified the I/O board temperature threshold per Casey.
- Modified most other board Temp sensor threholds and corresponding Fan Bst threshold
to match the latest Thermal and Acoustics Specification.
- Modified the Settable mask for CPU Temp sensors to remove UCRE
threshold value from SDR. This value now comes from PIROM. Revised the threshold values
per Thermal and Acoustic specification.
-------------------------------------------------------------------------------
SR460AC4 SDR
Released ver 0.13
6/11/2001
-------------------------------------------------------------------------------
Release ver 0.13
Date released: 6/11/2001
SR460AC4 BMC version supported : v0.22 (Gold)
SDR records supported in this release:
All SDR records are supported
New record added for this release:
None
Existing record removed for this release:
None
** Notice **
Before loading this SR460AC4 SDR13 release, please make sure you have the following hardware.
Legacy board -330 and above
I/O Baseboard -320 and above
Processor board -620 and above
Failure to use the listed hardware with this SDR SR460AC4 release may result in losing
server management monitoring capability by some sensors, as well as seeing bogus SEL
entries being logged.
* Major SDR content changes *
- Interchanged the Fan Tach string between 1B & 1C and ID & IE to address a Fan
connector issue.
- Note: This SDR is identical to SDR12 except for the above change in Fan Tach string
names.
-------------------------------------------------------------------------------
SR460AC4 SDR
Released ver 0.12
3/16/2001
-------------------------------------------------------------------------------
Release ver 0.12
Date released: 3/16/2001
SR460AC4 BMC ver supported : v0.20
SDR records supported in this release:
All SDR records are supported
New record added for this release:
None
Existing record removed for this release:
None
** Notice **
Before loading this SR460AC4 SDR12 release, please make sure you have the following hardware.
Legacy board -330 and above
I/O Baseboard -320 and above
Processor board -620 and above
Failure to use the listed hardware with this SDR SR460AC4 release may result in losing
server management monitoring capability by some sensors, as well as seeing bogus SEL
entries being logged.
* Major SDR content changes *
- Sensors on Legacy board are now prefixed with Leg (earlier I/O).
- Sensors Entity ID assiciation has been revised to reflect correct SDR 11 records.
- Disabled PHP Slot sensors pre final design.
- Adjusted the Assertion and Deassertion masks for Processor statsu sensors.
- Removed all Non-Critical (Upper and Lower) thresholds for Voltage Sensors and
adjusted the Reading/Settable mask accordingly.
- Adjusted the Assertion and Deassertion masks for Processor statsu sensors.
- Lowered the Upper NCR thresholds for all Fan Boost Sensors WRT to their Temp sensors.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
SR460AC4 SDR
Released ver 0.11
2/9/2001
-------------------------------------------------------------------------------
Release ver 0.11
Date released: 2/9/2001
SR460AC4 BMC ver supported : v0.18
SDR records supported in this release:
All SDR records are supported
New record added for this release:
None
Existing record removed for this release:
None
** Notice **
Before loading this SR460AC4 SDR release, please make sure you have the following hardware.
Legacy board -330 and above
I/O Baseboard -320 and above
Processor board -620 and above
Failure to use the listed hardware with this SDR SR460AC4 release may result in losing
server management monitoring capability by some sensors, as well as seeing bogus SEL
entries being logged.
* Major SDR content changes *
- More sensor name changes per request to standardize convention over
firmware, SDR file, and documenations. The affected sensors are :
OLD NAMES NEW NAMES
Processor 0 Temp --> CPU M0 Temp
Processor 1 Temp --> CPU M1 Temp
Processor 2 Temp --> CPU M2 Temp
Processor 3 Temp --> CPU M3 Temp
Proc 0 FanBst --> CPU M0 FanBst
Proc 1 FanBst --> CPU M1 FanBst
Proc 2 FanBst --> CPU M2 FanBst
Proc 3 FanBst --> CPU M3 FanBst
Processor 0 Stat --> CPU M0 Status
Processor 1 Stat --> CPU M1 Status
Processor 2 Stat --> CPU M2 Status
Processor 3 Stat --> CPU M3 Status
Processor 0 PGd --> CPU M0 PGd
Processor 1 PGd --> CPU M1 PGd
Processor 2 PGd --> CPU M2 PGd
Processor 3 PGd --> CPU M3 PGd
Proc 0 INFO FRU --> CPU M0 INFO FRU
Proc 1 INFO FRU --> CPU M1 INFO FRU
Proc 2 INFO FRU --> CPU M2 INFO FRU
Proc 3 INFO FRU --> CPU M3 INFO FRU
Proc 0 OEM FRU --> CPU M0 OEM FRU
Proc 1 OEM FRU --> CPU M1 OEM FRU
PROC 2 OEM FRU --> CPU M2 OEM FRU
PROC 3 OEM FRU --> CPU M3 OEM FRU
CBC Controller --> Chas Bridge Ctlr
- Corrected the re-arm support for all Tach Fan sensors (1Bh - 20h). They
should all be Auto Re-Arm as supposed to Manual Re-Arm.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Release ver 0.10
Date released: 1/19/2001
SR460AC4 BMC ver supported : v0.17
SDR records supported in this release:
All SDR records are supported
New record added for this release:
None
Existing record removed for this release:
Type 11h - FRU Locator record for HSC TeeDock FRU
Please refer to Major SDR Content Changes for detail.
** Notice **
Before loading this SR460AC4 SDR 10, please make sure you have the following hardware.
Legacy board -330 and above
I/O Baseboard -325 and above
Processor board -620 and above
Failure to use the listed hardware with this SDR SR460AC4 10 may result in losing
server management monitoring capability by some sensors, as well as seeing bogus SEL
entries logged.
* Major SDR content changes *
- Removed "HSC TeeDock FRU" locator record. According to IPMI Specification v1.1,
the presence of the "HSC TeeDock FRU" information is already indicated in the
"Hot Swap Ctlr" management device locator record. If the "HSC TeeDock FRU" is not
removed, users will see the duplicate FRU record when running Intel Server
Control (ISC) or similar softwares.
- Included appropriate upper and lower threshold reading mask for all Type 01 record.
- 2 sensor name changes per request to standardize convention over
firmware, SDR file, and documenations. The affected sensors are :
OLD NAMES NEW NAMES
I/O Brd 2.8V --> I/O Brd 2.5V
Proc 3.3V CPU --> SP 3.3V_CPU D2D
- Changed the linearization function, M, B, R exp, and B exp for all tach
fan sensors (1Bh - 20h). This is due to DR# 25212, in which raw reading
0 never translates into decimal readin 0 after applying the conversion
formula. The previous linearization functon is 1/x, and is now changed to
linear.
- Changed entity ID for all D2D sensors to 0x14. This change is to clarify
to all users that all D2D sensors are for monitoring "power converter". The
affected sensors are :
52h Up MemBrd D2D_0
53h Up MemBrd D2D_1
54h Lw MemBrd D2D_0
55h Lw MemBrd D2D_1
56h SP 3.3V_CPU D2D
57h SP 3.3V_1 D2D
58h SP 3.3V_2 D2D
59h SP 5V_1 D2D
5Ah SP 5V_2 D2D
5Bh Hot Swap 12V D2D
- Changed assertion and deassertion masks to 0x8502 for all temperature sensors
so that events will be generated for both lower non-critical and lower critical
thresholds. The tracker reference is DR# 25176. The affected sensors are :
21h Processor 0 Temp
22h Processor 1 Temp
23h Processor 2 Temp
24h Processor 3 Temp
25h Up Mem Brd Temp
26h Lw Mem Brd Temp
27h Sideplane Temp
28h I/O Brd Temp
29h Proc Brd Temp 1
2Ah Proc Brd Temp 2
- Modified the sensor event generation & sensor scanning defaults (bits 0 and 1 of the
sensor initialization byte field) for all Type 01h and 02h sensors. They are now
syncronized with the sensor default table in BMC firmware.
- Adjusted all thresholds for Proc Brd +1.5V (11h) back to their normal settings.
Previously, all the threshold settings were raised a little higher to accommodate a
hardware defect workaround, in which the voltage was raised from +1.5V to +1.6V.
The tracker reference is DR# 23320.
- Defined sensor initialization, capabilities, type, type code, and unit to Spare
Voltsnsr 1 (09h) and Spare Voltsnsr 2 (14h), as supposed to leave them as 0x0.
The changes are :
sensor initialization -> 0x04
sensor capabilities -> 0xC0
sensor type -> 0x02
event/reading type code -> 0x01
sensor units 2 -> 0x04
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Release ver 0.09
Date released: 12/01/2000
SR460AC4 BMC ver supported : v0.16
SDR records supported in this release:
All SDR records are supported, except the followings:
0Ah I/O Brd +2.8V
1Bh F172 Tach Fan 1
1Ch F172 Tach Fan 2
1Dh F172 Tach Fan 3
1Eh F172 Tach Fan 4
1Fh F120 Tach Fan 5
20h F120 Tach Fan 6
New record added for this release:
Type 11h - FRU Locator record for HSC SCSI BP FRU
* Major SDR content changes *
- Many sensor name changes per request to standardize convention over
firmware, SDR file, and documenations. The affected sensors are :
OLD NAMES NEW NAMES
Processor 1 Temp --> Processor 0 Temp
Processor 2 Temp --> Processor 1 Temp
Processor 3 Temp --> Processor 2 Temp
Processor 4 Temp --> Processor 3 Temp
Mem Brd A Temp --> Up Mem Brd Temp
Mem Brd B Temp --> Lw Mem Brd Temp
Proc 1 FAN Boost --> Proc 0 FanBst
Proc 2 FAN Boost --> Proc 1 FanBst
Proc 3 FAN Boost --> Proc 2 FanBst
Proc 4 FAN Boost --> Proc 3 FanBst
MemA FanBst Temp --> Up MemBrd FanBst
MemB FanBst Temp --> Lw MemBrd FanBst
I/OBseBrd FnBst --> I/O Brd FanBst
Procbrd FanBst 1 --> ProcBrd FanBst 1
Procbrd FanBst 2 --> ProcBrd FanBst 2
F172_0 Tach Fan1 --> F172 Tach Fan 1
F172_1 Tach Fan2 --> F172 Tach Fan 2
F172_2 Tach Fan3 --> F172 Tach Fan 3
F172_3 Tach Fan4 --> F172 Tach Fan 4
F120_4 Tach Fan5 --> F172 Tach Fan 5
F120_5 Tach Fan6 --> F172 Tach Fan 6
HotSwap Teedock --> HSC TeeDock Temp
HotSwap SCSI BP --> HSC SCSI BP Temp
Proc1 Status --> Processor 0 Stat
Proc2 Status --> Processor 1 Stat
Proc3 Status --> Processor 2 Stat
Proc4 Status --> Processor 3 Stat
PHP Slot 3 --> PCI HP Slot 3
PHP Slot 4 --> PCI HP Slot 4
PHP Slot 5 --> PCI HP Slot 5
PHP Slot 6 --> PCI HP Slot 6
PHP Slot 7 --> PCI HP Slot 7
PHP Slot 8 --> PCI HP Slot 8
PHP Slot 9 --> PCI HP Slot 9
PHP Slot 10 --> PCI HP Slot 10
Proc 1 PwrGood --> Processor 0 PGd
Proc 2 PwrGood --> Processor 1 PGd
Proc 3 PwrGood --> Processor 2 PGd
Proc 4 PwrGood --> Processor 3 PGd
Procbd1.8V Fuse --> ProcBrd 1.8V FOK
Procbrd Sys PGd --> ProcBrd Sys PGd
Procbrd Chipset --> ProcBrd Chipset
Mem Brd A PwrGd --> Up Mem Brd PGd
Mem Brd B PwrGd --> Lw Mem Brd PGd
MemBrd A D2D_1 --> Up MemBrd D2D_0
MemBrd A D2D_2 --> Up MemBrd D2D_1
MemBrd B D2D_1 --> Lw MemBrd D2D_0
MemBrd B D2D_2 --> Lw MemBrd D2D_1
Proc 3.3V D2D --> SP 3.3V CPU
I/O 3.3V D2D_A --> SP 3.3V_1 D2D
I/O 3.3V D2D_B --> SP 3.3V_2 D2D
I/O 5V D2D_A --> SP 5V_1 D2D
I/O 5V D2D_B --> SP 5V_2 D2D
48-to-12V D2D --> Hot Swap 12V D2D
CPU Brd Present --> Proc Brd Pres
MemBrd A Present --> Up Mem Brd Pres
MemBrd B Present --> Lw Mem Brd Pres
TeeDock 48V FOK --> Hot Swap 48V FOK
Proc 1 SECC FRU --> Proc 0 INFO FRU
Proc 2 SECC FRU --> Proc 1 INFO FRU
Proc 3 SECC FRU --> Proc 2 INFO FRU
Proc 4 SECC FRU --> Proc 3 INFO FRU
Mem Brd A FRU --> Up Mem Brd FRU
Mem Brd B FRU --> Lw Mem Brd FRU
I/O Basebrd FRU --> I/O Brd FRU
Hot Swap BP --> HSC TeeDock FRU
- All tach fan sensors (1Dh - 20h) are not enabled for this release due to
hardware issue.
- Changed the discrete reading mask for HSC drv status SDR records from 0x0000 to
0xFF1F.
- Changed the fan boost upper non-critical threshold to match the non-critical
threshold of its normal sensor record. The affected sensor records are :
2Fh Up MemBrd FanBst
30h Lw MemBrd FanBst
31h Sideplane FanBst
32h I/O Brd FanBst
33h ProcBrd FanBst 1
34h ProcBrd FanBst 2
- Swapped the threshold settings between Proc Brd Temp 1 and Proc Brd Temp 2; the
same to ProcBrd FanBst 1 and ProcBrd FanBst 2.
- Due to outstanding hardware issue on SR460AC4 Legacy board on voltage reference
to A/D converter, the critical setting window for the following had been
increased to avoid bogus SEL entry. Therefore, please don't take the critical
settings for any calculation, as they don't represent the actual limits.
0Bh "I/O Brd +3.3V"
0Ch "I/O Brd +3.3V Stdby"
0Dh "I/O Brd +5V"
0Eh "I/O Brd +5V Stdby"
0Fh "I/O Brd +12V"
10h "I/O Brd -12V"
- Due to processor board hardware issue, the critical setting window for
"Proc Brd +1.5V", 11h is calculated based on +1.6V as the normal voltage,
not +1.5V.
** Notice **
For SDR release 3 and above
- Please make sure to have legacy board (Brd ver 300 or above, except 303) for
BMC fan management to function correctly.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Release ver 0.08
Date released: 11/08/2000
SR460AC4 BMC ver supported : v0.15
SDR records supported up to this release:
All sensors from SR460AC4 SDR previous releases.
(** All fan tach sensors are disabled **)
* Major SDR content changes *
- Updated threshold settings for all temperature and fan boost sensors.
- Changed Pwr Unit Status sensor's assertion mask from 0x3300 to 0x7000,
and reading mask from 0x3300 to 0x7300.
- Changed Watchdog sensor from manual re-arm to automatic.
- Changed BIOS Post Code sensor assertion mask to 0x0200 and reading mask
to 0x0300.
- Changed FP Diag Int sensor deasseation to 0x0000.
- Changed all reading mask for all type 02 record that are 06 event base
type from 0x0200 to 0x0300.
- Changed Proc Status sensor assertion + reading mask from 0xFF03 to 0x9201.
Also, changed to manual re-arm.
- Changed all PHP Slot sensors reading mask from 0x2100 to 0x3900.
- Changed CPU Brd Present, MemBrd A Present, and Mem Brd B Present sensor
type to 15h. Also, changed the assertion + deassertion mask to 0x0100;
reading masking to 0x0300.
- Changed power state notification from 0x8C to 0x88 for Basebrd Mgt Ctlr
type 12 record.
- All tach fan sensors (1Dh - 20h) are not enabled for this release due to
hardware issue.
- Due to outstanding hardware issue on SR460AC4 Legacy board on voltage reference
to A/D converter, the critical setting window for the following had been
increased to avoid bogus SEL entry. Therefore, please don't take the critical
settings for any calculation, as they don't represent the actual limits.
0Bh "I/O Brd +3.3V"
0Ch "I/O Brd +3.3V Stdby"
0Dh "I/O Brd +5V"
0Eh "I/O Brd +5V Stdby"
0Fh "I/O Brd +12V"
10h "I/O Brd -12V"
- Due to processor board hardware issue, the critical setting window for
"Proc Brd +1.5V", 11h is calculated based on +1.6V as the normal voltage,
not +1.5V.
** Notice **
For SDR release 3 and above
- Please make sure to have legacy board (Brd ver 300 or above, except 303) for
BMC fan management to function correctly.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Release ver 0.07
Date released: 10/03/2000
SR460AC4 BMC ver supported : v0.13
SDR records supported up to this release:
All sensors from SR460AC4 SDR previous releases and the followings.
(But fan tach sensors are disabled for this release, please see
details below)
Sensor# Sensor Name
(BMC)
15h "SCSI TERMV00"
16h "SCSI TERMV01"
17h "SCSI TERMV02"
Type 11h - FRU Locator record for Hot Swap BP
* Major SDR content changes *
- Added new FRU locator record, "Hot Swap BP"
- Adjusted normal range and critical limits for all temperature sensors.
- Changed event / reading base type for BIOS Post Code to 03h.
- Many SDR tracker bugs were fixed in this release.
1) DR# 24090 - Changed the BMC global initization in type 12 record to 8Ch.
2) DR# 24091 - Changed the BMC device capabilities in type 12 record to 3Fh.
3) DR# 24092 - Corrected the BMC entity ID to 07h in type 12 record
4) DR# 23094 - Corrected the entity instance in type 11 record
for Pwr Supply 1 to 1.
5) DR# 24095 - Changed all entity IDs for Pwr Supply sensors.
6) DR# 24098 - Changed entity IDs for some processor board sensors to 12h.
7) DR# 24103 - Changed entity IDs for Pwr Unit sensor to 13h.
8) DR# 24104 - changed sensor unit 1 for all type 2 records to C0h.
9) DR# 24109 - changed event types for HSC drive status to 6Fh.
10) DR# 24110 - Set assertion, deassertion, readable masks for HSC drive
status to 0000h.
11) DR# 23747 - Adjust all lower and upper non-critical limits to be always
larger than nominal minimum and maximum.
12) DR# 23755 - Corrected the reading conversion factors for processor baord
+1.5V and +3.3V.
- All tach fan sensors (1Dh - 20h) are not enabled for this release due to
hardware issue.
- Due to outstanding hardware issue on SR460AC4 Legacy board on voltage reference
to A/D converter, the critical setting window for the following had been
increased to avoid bogus SEL entry. Therefore, please don't take the critical
settings for any calculation, as they don't represent the actual limits.
0Bh "I/O Brd +3.3V"
0Ch "I/O Brd +3.3V Stdby"
0Dh "I/O Brd +5V"
0Eh "I/O Brd +5V Stdby"
0Fh "I/O Brd +12V"
10h "I/O Brd -12V"
- Due to processor board hardware issue, the critical setting window for
"Proc Brd +1.5V", 11h is calculated based on +1.6V as the normal voltage,
not +1.5V.
** Notice **
For SDR release 3 and above
- Please make sure to have legacy board (Brd ver 300 or above, except 303) for
BMC fan management to function correctly.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Release ver 0.06
Date released: 9/11/2000
SR460AC4 BMC ver supported : v0.12
SDR records supported up to this release:
All sensors from SR460AC4 SDR previous releases and the followings.
(But fan tach sensors are disabled for this release, please see
details below)
Sensor# Sensor Name
(BMC)
35h "Proc1 Status"
36h "Proc2 Status"
37h "Proc3 Status"
38h "Proc4 Status"
5Dh "CPU Brd Present"
5Eh "MemBrd A Present"
5Fh "MemBrd B Present"
60h "TeeDock 48V FOK"
* Major SDR content changes *
- Changed the "Watchdog" sensor's deassertion event mask from FF01 to 0000.
This is to disable deassertion event generation.
- All tach fan sensors (1Dh - 20h) are enabled for this release.
** Notice **
For SDR release 3 and above
- Please make sure to have legacy board (Brd ver 300 or above, except 303) for
BMC fan management to function correctly.
-------------------------------------------------------------------------------
Release ver 0.05
Date released: 8/04/2000
SR460AC4 BMC ver supported : v0.10 or v0.11
SDR records supported up to this release:
All sensors from SR460AC4 SDR previous releases. (But fan tach sensors
are disabled for this release, please see details below)
* Major SDR content changes *
- Due to incompatibility issue on running BMC v0.10 /v0.11 on SR460AC4 Legacy board
(Brd ver 303) that would cause BMC to trigger fan boost. All tach fan sensors
will be disabled for this release. The affected tach fan sensors are :
1Bh "F172_0 Tach Fan1"
1Ch "F172_1 Tach Fan2"
1Dh "F172_2 Tach Fan3"
1Eh "F172_3 Tach Fan4"
1Fh "F120_4 Tach Fan5"
20h "F120_5 Tach Fan6"
** Notice **
For SDR release 3 and above
- Please make sure to have legacy board (Brd ver 300 or above, except 303) for
BMC fan management to function correctly.
-------------------------------------------------------------------------------
Release ver 0.04
Date released: 8/02/2000
SR460AC4 BMC ver supported : v0.10 or v0.11
SDR records supported up to this release:
All sensors from SR460AC4 SDR v0.01 & v0.02 & v0.03.
* Major SDR content changes *
- Fixed DR# 23177, where the event type for HSC drive status was incorrectly
set to 0x08 as supposed to 0x00.
- Due to outstanding hardware issue on SR460AC4 Legacy board on voltage reference
to A/D converter, the critical setting window for the following had been
increased to avoid bogus SEL entry.
0Bh "I/O Brd +3.3V"
0Ch "I/O Brd +3.3V Stdby"
0Dh "I/O Brd +5V"
0Eh "I/O Brd +5V Stdby"
0Fh "I/O Brd +12V"
10h "I/O Brd -12V"
- Changed the deassertion event mask for "Scrty Violation, Sensor# 0x04" from
0x2100 to 0x0000.
- Changed the processor status assertion event mask from 0x1100 to 0x1200,
and the deassertion event mask from 0x1100 to 0x0000. Also, changed
the reading mask from 0x0000 to 0xFF03. The affected sensors are "PROC1
Status", "PROC2 Status", "PROC3 Status", and PROC4 Status", and they are
not supported yet.
** Notice **
For SDR release 3 and above
- Please make sure to have legacy board (Brd ver 300 or above) for BMC fan
management to function correctly.
-------------------------------------------------------------------------------
Release ver 0.03
Date released: 7/13/2000
SR460AC4 BMC ver supported : v0.10
SDR records supported up to this release:
All sensors from SR460AC4 SDR v0.01 & v0.02 and the followings
Sensor# Sensor Name
(BMC)
01h "Pwr Unit Status"
02h "Pwr Unit Redund"
07h "I/O Brd +1.5V"
08h "I/O Brd +1.8V"
0Bh "I/O Brd +3.3V"
0Ch "I/O Brd +3.3V Stdby"
0Dh "I/O Brd +5V"
0Eh "I/O Brd +5V Stdby"
0Fh "I/O Brd +12V"
10h "I/O Brd -12V"
11h "Proc Brd +1.5V"
12h "Proc Brd +1.8V"
13h "Proc Brd +3.3V"
18h "SCSI_TERMV10"
19h "SCSI_TERMV11"
1Ah "SCSI_TERMV12"
1Bh "F172_0 Tach Fan1"
1Ch "F172_1 Tach Fan2"
1Dh "F172_2 Tach Fan3"
1Eh "F172_3 Tach Fan4"
1Fh "F120_4 Tach Fan5"
20h "F120_5 Tach Fan6"
21h "Proc1 Temp"
22h "Proc2 Temp"
23h "Proc3 Temp"
24h "Proc4 Temp"
27h "Sideplane Temp"
28h "I/O Basebrd Temp"
29h "Proc Brd Temp 1"
2Ah "Proc Brd Temp 2"
32h "I/OBasebrd FnBst"
33h "Procbrd FanBst 1"
34h "Procbrd FanBst 2"
4Bh "PwrSupply PwrGood"
4Ch "Mem BrdA PwrGood"
4Dh "Mem BrdB PwrGood"
52h "MemBrdA D2D_1"
53h "MemBrdA D2D_2"
54h "MemBrdB D2D_1"
55h "MemBrdB D2D_2"
5Bh "48-to-12V D2D"
Type 08h - Entity Association record for power supply
Type 12h - Management Controller Device Locator Record for BMC
Type 12h - Management Controller Device Locator Record for HSC
Type 12h - Management Controller Device Locator Record for CBC
(HSC)
01h "HotSwap TeeDock"
02h "HotSwap SCSI BP"
03h "HSC Drv 1 Status"
04h "HSC Drv 2 Status"
05h "HSC Drv 1 Pres"
06h "HSC Drv 2 Pres"
* Major SDR content changes *
- The naming of all I/O baseboard sensors have been modified
to closely match with those specified in SR460AC4 EPS.
- All FRU locator records (Type 11) had been changed to contain
FRU device ID instead of FRU slave address.
** Notice **
- Due to hardware issue on SR460AC4 Legacy board (Brd ver 300, 301, 302),
sensor readings from sensor# 0x0B, 0x0C, 0x0D, and 0x0E are higher
than their expected nominal value.
-------------------------------------------------------------------------------
Release ver 0.02
Date released: 5/12/2000
SR460AC4 BMC ver supported : v0.06
SDR records supported to this release:
All sensors from SR460AC4 SDR v0.01 and the followings
Sensor# Sensor Name
04h "Platform Security Violation"
25h "Mem Brd A Temp"
26h "Mem Brd B Temp"
2Bh "Fan Boost Proc1 Temp"
2Ch "Fan Boost Proc2 Temp"
2Dh "Fan Boost Proc3 Temp"
2Eh "Fan Boost Proc4 Temp"
2Fh "Fan Boost Mem Brd A Temp"
30h "Fan Boost Mem Brd B Temp"
31h "Fan Boost Sideplane Temp"
5Ch "Fan Boost TeeDock"
39h "PHP Slot 3"
3Ah "PHP Slot 4"
3Bh "PHP Slot 5"
3Ch "PHP Slot 6"
3Dh "PHP Slot 7"
3Eh "PHP Slot 8"
3Fh "PHP Slot 9"
40h "PHP Slot 10"
41h "Proc1 PwrGood"
42h "Proc2 PwrGood"
43h "Proc3 PwrGood"
44h "Proc4 PwrGood"
45h "Proc Brd 1.5V PwrGood"
46h "Proc Brd 1.5V Fuse Ok"
47h "Proc Brd 1.8V PwrGood"
48h "Proc Brd 1.8V Fuse OK"
49h "Proc Brd Sys PwrGood"
4Ah "Proc Brd Chipset Pwr Good"
4Eh "Pwr Supply 1"
4Fh "Pwr Supply 2"
50h "Pwr Supply 3"
51h "Pwr Supply 4"
56h "Proc 3.3V D2D Status"
57h "I/O 3.3V D2D_A Status"
58h "I/O 3.3V D2D_B Status"
59h "I/O 5V D2D_A Status"
5Ah "I/O 5V D2D_B Status"
-------------------------------------------------------------------------------
SDR records supported up to this release:
Release ver 0.01
Date released: 4/10/2000
SR460AC4 BMC ver supported : v0.05
Sensor# Sensor Name
03h "Watchdog"
05h "BIOS Post Code"
21h "Processor 1 Temp"
22h "Processor 2 Temp"
23h "Processor 3 Temp"
24h "Processor 4 Temp"
27h "Sideplane Temp"
Type 11h - FRU Locator record for Proc 1 SECC FRU
Type 11h - FRU Locator record for Proc 2 SECC FRU
Type 11h - FRU Locator record for Proc 3 SECC FRU
Type 11h - FRU Locator record for Proc 4 SECC FRU
Type 11h - FRU Locator record for Proc 1 OEM FRU
Type 11h - FRU Locator record for Proc 2 OEM FRU
Type 11h - FRU Locator record for Proc 3 OEM FRU
Type 11h - FRU Locator record for Proc 4 OEM FRU
Type 11h - FRU Locator record for Pwr Supply 1 FRU
Type 11h - FRU Locator record for Pwr Supply 2 FRU
Type 11h - FRU Locator record for Pwr Supply 3 FRU
Type 11h - FRU Locator record for Pwr Supply 4 FRU
Type 11h - FRU Locator record for Proc Brd FRU
Type 11h - FRU Locator record for Mem Brd A FRU
Type 11h - FRU Locator record for Mem Brd B FRU
Type 11h - FRU Locator record for I/O Basebrd FRU
Type 11h - FRU Locator record for Sideplane FRU
-------------------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.