[DRIVER] SaveSettingsOnExit=OFF DMATimingMode=1 4232ADPCMEnable=1 ;UseAllFs=0 [MIXER] OLB=OFF WaveVolumeOffset=48 HWMUTE=0,1,N lMasterVolume=42280 rMasterVolume=42280 MasterMute=no MasterGang=ON lMicVolume=43885 rMicVolume=43885 MicVolume=43885 MicInputMute=no MicOutputMute=yes MicBoost=no MicGang=ON lAuxVolume=42280 rAuxVolume=42280 AuxMute=no Aux1InputMute=yes AuxGang=ON lAux2Volume=40610 rAux2Volume=40610 Aux2Mute=no Aux2InputMute=no Aux2Gang=ON lLineMixVolume=42280 rLineMixVolume=42280 LineMixMute=no LineMixGang=ON MonoVolume=no MonoMute=yes MonoOutMute=yes lDacSERVolume=45874 rDacSERVolume=45874 DacSERMute=yes lLine-inVolume=45874 rLine-inVolume=45874 Line-inInputMute=ON Line-inOutputMute=ON lWaveOutVolume=32750 rWaveOutVolume=32750 WaveOutMute=no WaveInMute=yes lSysVol=51745 rSysVol=51745 lWaveinMasterVolume=36000 rWaveinMasterVolume=36000 Dac2Mux=no rDac2Volume=21615 lDac2Volume=21615 Dac2OutputMute=no Dac2InputMute=no rMonitorMute=yes lMonitorMute=yes lLowPriMicVolume=45874 rLowPriMicVolume=45874 LowPriMicVolume=45874 LowPriMicMute=yes LowPriMicBoost=ON lLowPriLineVolume=45874 rLowPriLineVolume=45874 lLowPriLoopBackInputVolume=45874 rLowPriLoopBackInputVolume=45874 lLowPriAuxInVolume=45874 rLowPriAuxInVolume=45874 lVirtMaster=48059 rVirtMaster=48059 VirtMasterMute=OFF VirtMasterGang=ON ; Mode 2 controls lLineVolume=45874 rLineVolume=45874 LineGang=ON lAuxInVolume=45874 rAuxInVolume=45874 AuxInGang=ON lLoopBackInputVolume=45874 rLoopBackInputVolume=45874 LoopBackInputGang=ON MonitorVolume=42280 MonitorMute=ON MonitorMode=Recording MicAGC=OFF DisableKaraokeMode=OFF KaraokeMode=OFF SmartKaraokeMode=ON ; value encoding changed, used to be: ;InputSelection=MIC ;LowPriInputSelection=MIC ; now should be: InputSelection=8 LowPriInputSelection=8 ; Tables added for volume slider control ---------- ; The values in the following table are editable to meet OEM needs ; however, there are limits for all these tables. ; For the analog table, synth table and mic table, entries are ranged from 0 to 31, ; maximum number of entries for those tables are 32 entries. ; For the digital table and DAC table, entries are ranged from 0 to 63, maximum number ; of entries is 64 entries. ; For the mono table, entries are ranged from 0 to 13, maximum number of entries is 16, ; For the masterin table, entries are ranged from 0 to 7, maximum number of entries is 16, ; For the masterout table, entries are ranged from 0 to 25, maximum number of entries is 16. ; The MonoGainTable isn't used in Mahler, as attenuator is a single 9dB step. ; AnalogGainTable="31,20,17,15,14,13,12,11,10,10,9,9,8,7,7,6,6,6,6,5,5,5,4,4,4,3,3,3,2,2,1,1" DigitalGainTable="63,34,32,30,28,26,24,22,21,20,18,17,17,16,16,16,15,15,15,14,14,14,13,13,13,12,12,12,11,11,11,10,10,10,9,9,9,8,8,8,7,7,7,6,6,6,5,5,5,4,4,4,3,3,3,2,2,2,1,1,1,0,0,0" SynthGainTable="31,20,17,15,14,13,12,11,10,10,9,9,8,7,7,6,6,6,6,5,5,5,4,4,4,3,3,3,2,2,1,1" MicGainTable="31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0" DacGainTable="63,34,32,30,28,26,24,22,21,20,18,17,17,16,16,16,15,15,15,14,14,14,13,13,13,12,12,12,11,11,11,10,10,10,9,9,9,8,8,8,7,7,7,6,6,6,5,5,5,4,4,4,3,3,3,2,2,2,1,1,1,0,0,0" MonoGainTable="13,11,8,6,5,5,4,4,3,3,2,2,1,1,0,0" MasterInGainTable="0,3,4,5,6,6,6,7" MasterOutGainTable="0,20,24,27,30,32,34,35,36,37,38,39,40,41,42,43" BramsMasterOutGainTable="0,7,10,11,12,13,14,14,15,15,16,17,17,18,19,20" ; DSP serial port mode: ;0=disable, 1= enable, 2= enable and route analog sources to serial port ;3 and 4=settings for SPDIF output. ;set EnableDSPSerialPort=3 to connect to analog sources. ;set EnableDSPSerialPort=4 to connect to dsp. EnableDSPSerialPort=0 ;The SPDIF Category Code. ;7-digit binary number represented as string of 1's and 0's. SPDIFCategory='0000000' ;Boolean, ON=data is digital audio, OFF=data is non-audio. SPDIFIsAudio=ON ;Boolean, ON=Copying is permitted/copyright is not asserted. ;OFF=Copying is inhibited/copyright is asserted. SPDIFPermitCopy=ON ;Boolean, ON=data is original/commercially pre-recorded. ;OFF=no indication, 1st generation or higher SPDIFOriginalGeneration=OFF ;The level of pre-emphesis ;Decimal Integer, 0=None, 1= 50/15us, 2-channel audio SPDIFPreemphesis=0 [RECORD] HighPassFilter=Off Dither=Off [CONTROLS] ;JoystickRate=0 3DSpace=0 3DCenter=7 3DMute=no 3DMonoToStereo=no ;********************************************************** ;* Line Source Names ( short/long names ) ;********************************************************** ShortNameWaveOutVolume=Wave Vol LongNameWaveOutVolume=Wave Out Volume ShortNameLine=Synth LongNameLine=Synth ShortNameAux1=Line LongNameAux1=Line ShortNameAux2=CD LongNameAux2=CD ShortNameMono=PC Speaker LongNameMono=PC Speaker ShortNameMonitor=Monitor LongNameMonitor=Monitor ShortNameWave=Wave LongNameWave=Wave ShortNameMic=Mic LongNameMic=Mic ShortNameDac2=Synth LongNameDac2=Synth ShortNameZVPORT=ZVPORT LongNameZVPORT=ZVPORT ShortNameDac2Mux=ZVPORT Enable LongNameDac2Mux=ZVPORT Enable ShortName3DSpace=Space LongName3DSpace=3D Space ShortName3DCenter=Center LongName3DCenter=3d Center ShortName3DMute=Mute LongName3DMute=3D Mute ShortNameDacSER=Serial LongNameDacSER=Serial In ShortNameLine-in=Line LongNameLine-in=Line ShortNameMonoOutMute=MonoOut Mute LongNameMonoOutMute=PC Speaker Mute ;****************************************************** ;* Destination Names ;****************************************************** LongNameLoopback=MixOut LongNameLineOut=Master Out ShortNameLineOut=Master LongNameMuxOut=Master Record ShortNameMuxOut=Record LongNameLowPriMuxOut=Low Priority Input ShortNameLowPriMuxOut=LowPriIn ;LongNameXCTL0=XControl 0 ;ShortNameXCTL0=XCTL 0 ;LongNameXCTL1=XControl 1 ;ShortNameXCTL1=XCTL 1 LongNameKaraoke=Karaoke Mode ShortNameKaraoke=Karaoke LongNameSysVol=System Volume ShortNameSysVol=SystemVol LongNameMicBoost=Microphone Boost ShortNameMicBoost=Mic Boost ; Uncomment the following to set timelimit for power down on idle ; IdleTimer0H=0 ; IdleTimer0L=60000 ; ; These controls are used to disable XCTLs when a device ; has internal 3D circuitry. This is to support customers ; that use XCTLs to control external SRC circuitry. ; DisableIf3DXCTL0=OFF DisableIf3DXCTL1=OFF ; Specification of mode2 source lines that should be usable has changed to ; a bit map, with '1' representing available and '0' representing not available. ; The bit positions represent the lines indicated by the old-style setting. ; For Playback, bit[0] (leftmost bit)== "Wave" ; bit[1]== "Monitor" ; bit[2]== "Mono" ; bit[3]== "Line" ; bit[4]== "Aux1" ; bit[5]== "Aux2" ; ; For Record, bit[0] (leftmost bit)== "Line" ; bit[1]== "Aux1" ; bit[2]== "MixOut" (Loop) ; bit[3]== "Mic" ; used to be: ;MixerSources="Wave,Monitor,Mono,Line,Aux1,Aux2" ;InputSources="Line,Aux1,Loop,Mic" ; now is MixerSources=111111 InputSources=1111 ; For Mode3 mixer and input sources, values are a bit map determining which source ; lines are supposed to be supported. The possibilities are: ; playback (Mixer): x,DIG-SER,DIG-wave,DIG-synth,aux2,aux1,line-in,mic,mono ; record (Input): x,DIG-SER,DIG-wave,DIG-synth,aux2,aux1,line-in,mic,x ; where x is just a placeholder to make the strings the same length and easier ; to modify correctly. Note that if line-in is set to 0, it will be ganged ; with the DIG-synth source. Mode3MixerSources=x01111011 Mode3InputSources=x0111101xDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.