Point Pad README File
This file contains installation notes and related
information for the Point Pad Driver Disk.
____________________________________________________________
README FILE CONTENTS
1. WINDOWS 95 SUPPORT
1.1 Driver Installation
1.2 Using the Point Pad Control Panel
1.3 Control Panel Restrictions
1.4 Restoring Your Installation
2. WINDOWS 3.1 SUPPORT
2.1 Driver Installation
2.2 Using the Point Pad Control Panel
2.3 Restoring Your Installation
3. DOS SUPPORT
4. FILES ON THE DRIVER DISK
____________________________________________________________
1. WINDOWS 95 SUPPORT
1.1 Driver Installation
INSTALLING FROM MOUSE PROPERTIES
Use this procedure to change from a standard Windows 95
mouse driver, or from another driver that uses the
standard Mouse Properties sheet:
- From the Start menu, select Settings, Control Panel,
then double-click Mouse to open Mouse Properties.
NOTE: If you cannot find Mouse Properties, or if
your version does not have a Change option, skip
ahead to "Installing from Device Manager."
- Select the General tab, then click Change. The Select
Device screen will appear.
- Click Have Disk and insert the driver disk in your
floppy drive. Confirm or correct the source file path
(normally "A:\"), then click OK.
- Click Point Pad, then click OK to copy the driver
files to your system.
- After the files are copied, Mouse Properties will
show the new device name. Click Close.
- The System Settings Change message will offer to
restart your computer so the new settings can take
effect. Click Yes.
INSTALLING FROM DEVICE MANAGER
Use this procedure if you cannot access the Change
option through Mouse Properties (for example, your
current driver substitutes its own control panel):
- From the Start menu, select Settings, Control Panel,
then double-click System to open System Properties.
- Select the Device Manager tab, then View devices by
type. Click the plus sign next to the Mouse category.
One or more device names will appear under Mouse.
- Double-click the device name that matches your
hardware, opening its property sheet.
- Select the Driver tab, then click Change Driver. The
Select Device screen will appear.
- Click Have Disk and insert the driver disk in your
floppy drive. Confirm or correct the source file path
(normally "A:\"), then click OK.
- Click Point Pad, then click OK to return to the
property sheet Driver tab.
- Click OK to copy the driver files to your system.
- The System Settings Change message will offer to
restart your computer so the new settings can take
effect. Click Yes.
INSTALLING FROM ADD NEW HARDWARE
Another way to change drivers is through the Add New
Hardware Wizard in Control Panel. However, this method
produces a confusing display in Device Manager, because
it adds new Mouse entries without clearing the old
ones. It may also lead to inaccurate information about
which pointing devices are active or inactive.
1.2 Using the Point Pad Control Panel
- From the Start menu, select Settings, Control Panel,
then double-click Point Pad to bring up the Point Pad
Control Panel. (This enhanced control panel replaces
the standard Mouse Properties sheet.)
TIP: You can create a shortcut for this step by
dragging the Point Pad icon onto the desktop.
- The Point Pad controls are grouped into four
categories (Pointer, Motion, Orientation, Shortcuts).
Online Help is provided for all topics.
- When you are satisfied with your settings, click OK
to close the Point Pad Control Panel.
1.3 Control Panel Restrictions
Most of the Point Pad Control Panel features operate
identically under Windows 3.1 and Windows 95, except
for the following:
- Pointer Growth: These controls are disabled under
Windows 95, where Pointer Growth is not currently
supported.
1.4 Restoring Your Installation
The Point Pad drivers are compatible with most standard
mice and similar pointing devices. However, if you do
change drivers to use another device, you can restore
the Point Pad installation (including your previous
control panel settings) as follows:
- Follow the first-time installation procedure in
section 1.1, using the Mouse Properties or Device
Manager method, up to the Select Device screen.
- Click on Show all devices. In the Manufacturers
column, select Hagiwara Sys-Com. In the Models
column, select Point Pad. Click OK (twice if you
started from Device Manager).
- You will be asked to insert the Point Pad Driver
Disk. Instead, click OK to clear this prompt.
- In the Copying Files... dialog, edit the source path
to read "C:\PTPAD" (using the same drive letter as
your Windows 95 system files). Click OK.
- If you entered through Mouse Properties, click Close
(not necessary with the Device Manager method).
- The System Settings Change message will offer to
restart your computer so the new settings can take
effect. Select Yes.
____________________________________________________________
2. WINDOWS 3.1 SUPPORT
2.1 Driver Installation
To install the Point Pad driver for Windows 3.1
(including Windows 3.11 or Windows for Workgroups) or
any DOS version (3.3 or later is recommended):
- Insert the driver disk in your floppy drive. If you
are running Windows, close any open applications.
- From the DOS prompt or the Program Manager File/Run
menu, type "A:\INSTALL" (using your floppy drive
letter) and press Enter (or click OK).
- You will be asked to confirm the installation type
(DOS, Windows, or both), the driver directory, and
whether the DOS driver should be loaded at startup
time. If you are unsure about any question, simply
accept the default response.
- In most cases, Install will offer to restart your
system so the new settings can take effect.
2.2 Using the Point Pad Control Panel
- From the Program Manager, open the Main program
group, then double-click on Control Panel.
- Double-click the Point Pad icon to bring up the Point
Pad Control Panel. (This enhanced control panel
replaces the standard Mouse Control Panel.)
- The Point Pad controls are grouped into four
categories (Pointer, Motion, Orientation, Shortcuts).
Online Help is provided for all topics.
- When you are satisfied with your settings, click OK
to close the Point Pad Control Panel.
2.3 Restoring Your Installation
The Point Pad drivers are compatible with most standard
mice and similar pointing devices. However, if you do
change drivers to use another device, you can restore
the Point Pad installation (including your previous
control panel settings) as follows:
- If you are running Windows, close any open
applications.
- From the DOS prompt or the Program Manager File/Run
menu, type "C:\PTPAD\INSTALL" (using the drive and
directory from your original Point Pad installation)
and press Enter (or click OK).
- Follow the prompts. For the driver directory, again
specify the same path (e.g., C:\PTPAD) from your
original Point Pad installation. Using this path will
cause Install to restore the previous configuration
using those files and saved settings.
- In most cases, Install will offer to restart your
system so the new settings can take effect.
____________________________________________________________
3. DOS SUPPORT
The Windows 95 installation described in section 1.1
automatically includes the DOS driver, PADMOUSE.COM.
This driver provides the support needed for mouse-aware
DOS applications, either full-screen or windowed.
If you are not running Windows 95, use the INSTALL
program as described in section 2.1 to install the
Point Pad drivers for DOS only, Windows only (version
3.1), or both DOS and Windows.
Some of the Point Pad settings (such as sensitivity,
acceleration and orientation) are shared between the
DOS and Windows drivers. The easiest way to set these
options is through the Point Pad Control Panel in
Windows. The DOS driver will pick up any changes the
next time it starts up.
Other settings (such as the pointer options) may differ
between DOS and Windows, and are stored separately in
the MOUSE.INI file. You can change the DOS settings
directly by editing this file or by adding option
switches to the PADMOUSE command line.
For a summary of the available command line options,
type "PADMOUSE /?" at the DOS command prompt. For
further details, see PADMOUSE.TXT or PADMOUSE.WRI.
____________________________________________________________
4. FILES ON THE DRIVER DISK
README.TXT User notes (DOS text version)
README.WRI User notes (Windows Write version)
PTPAD.INF Windows 95 setup script
INSTALL.EXE Windows 3.1 (or DOS) install program
PTPAD.DRV Windows driver
PTPAD.DLL Windows control panel
PTPAD.HLP Windows help file
SFTTABS.DLL Windows control panel interface
XMAIN.DLL Windows 95 control panel adapter
XMVMD.386 Windows Virtual Mouse Device
XPOINT.EXE Windows pointer enhancements
PADMOUSE.COM DOS driver
PADMOUSE.TXT DOS driver reference (DOS text)
PADMOUSE.WRI DOS driver reference (Windows Write)
MOUSE.INI DOS and Windows configuration file
____________________________________________________________
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.