1. Pi0500.zip Driver
2. CLICHOS2.INI File Contents

CLICHOS2.INI Driver File Contents (Pi0500.zip)

; Crystal Semiconductor - PCI audio driver configuration file.

[\Config\Mixer]

MicSelect=1             ; 1=Microphone #1 (Default)
                        ; 2=Microphone #2

LineMap=1               ; 1=CD (default)
                        ; 2=Video
                        ; 3=Aux
                        ; 4=Line
                        ; 5=Reserved
                        ; 6=Reserved
                        ; 7=Phone

AltOutMute=0            ; 0=Audible(Default), 1=Mute
MonoOutMute=0           ; 0=Audible(Default), 1=Mute

MasterVolume  = 50     ; Master volume default    (0..100, default 50)
AltVolume     = 50     ; Headphone volume default
MonoOutVolume = 50     ; Mono out volume default


PCMVolume  = 50        ; Range 0..100
MonoInVolume  = 50      ; Range 0..100
PhoneVolume   = 50
MicVolume     = 0       ; Default mic muted.  Change to 50 to enable karoke.
                        ; Note: This setting does not effect Mic record.
                        ; Setting this value too high will produce a
                        ; feedback loop.
LineVolume    = 75      ; Range 0..100
CDVolume      = 75
VideoVolume   = 50
AuxVolume     = 50

; Default record settings.
; These settings are normally overwritten by MMPM/2 APIs.
ADCGain       = 50      ; Default record gain
MuxSelect     = 1       ; Default record source (Use values from LineMap)
MicBoost      = 0       ; Default setting for +20dB microphone boost


MicVolumeMon  = 50      ; Mic volume during monitor.  Range 0..100, default 50.


; LOGICAL to PHYSICAL VOLUME TABLES

MasterVolumeTable    =63,58,54,51,48,45,42,39,36,34,32,30,28,26,24,22,20,19,18,17,17,16,16,15,15,14,14,13,13,12,12,11,11,10,10,9,9,8,8,8,7,7,7,6,6,6,5,5,5,4,4,4,3,3,3,2,2,2,1,1,1,0,0,0
HeadphoneVolumeTable =63,58,54,51,48,45,42,39,36,34,32,30,28,26,24,22,20,19,18,17,17,16,16,15,15,14,14,13,13,12,12,11,11,10,10,9,9,8,8,8,7,7,7,6,6,6,5,5,5,4,4,4,3,3,3,2,2,2,1,1,1,0,0,0
MonoOutVolumeTable   =63,58,54,51,48,45,42,39,36,34,32,30,28,26,24,22,20,19,18,17,17,16,16,15,15,14,14,13,13,12,12,11,11,10,10,9,9,8,8,8,7,7,7,6,6,6,5,5,5,4,4,4,3,3,3,2,2,2,1,1,1,0,0,0

;----------------------------------------------------------------------

PCMVolumeTable    =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
MonoInVolumeTable =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
PhoneVolumeTable  =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
MicVolumeTable    =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
LineVolumeTable   =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
CDVolumeTable     =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
VideoVolumeTable  =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
AuxVolumeTable    =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8

; NOTE: PCMVolume input to AC97 mixer is fixed at 0dB (output=input).
; To adjust wave audio volume relative to other signals, see WaveSkewPercent.


RecordGainTable   =0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15


;----------------------------------------------------------------------
; Skew variables
;

MasterVolSkew   = 0     ; Master volume adjustment (default: 0, no adjustment)
AltVolSkew      = 0     ; Headphone volume adjustment
MonoOutSkew     = 0     ; Mono out adjustment

PCMSkew         = 0
MonoInSkew      = 0
PhoneSkew       = 0
MicSkew         = 0
LineSkew        = 0
CDSkew          = 0     ; NOTE: CD listening level should be set with "CDVolume"
VideoSkew       = 0
AuxSkew         = 0
ADCGainSkew     = 2     ; Adjustment to RECORD signal level

WaveSkewPercent = 66    ; 100 means no adjustment.  66 means 34% quieter.