; Crystal Semiconductor - PCI audio driver configuration file.
[\Config\Mixer]
MicSelect=1 ; 1=Microphone #1 (Default)
; 2=Microphone #2
LineMap=1 ; 1=CD (default)
; 2=Video
; 3=Aux
; 4=Line
; 5=Reserved
; 6=Reserved
; 7=Phone
AltOutMute=0 ; 0=Audible(Default), 1=Mute
MonoOutMute=0 ; 0=Audible(Default), 1=Mute
MasterVolume = 50 ; Master volume default (0..100, default 50)
AltVolume = 50 ; Headphone volume default
MonoOutVolume = 50 ; Mono out volume default
PCMVolume = 50 ; Range 0..100
MonoInVolume = 50 ; Range 0..100
PhoneVolume = 50
MicVolume = 0 ; Default mic muted. Change to 50 to enable karoke.
; Note: This setting does not effect Mic record.
; Setting this value too high will produce a
; feedback loop.
LineVolume = 75 ; Range 0..100
CDVolume = 75
VideoVolume = 50
AuxVolume = 50
; Default record settings.
; These settings are normally overwritten by MMPM/2 APIs.
ADCGain = 50 ; Default record gain
MuxSelect = 1 ; Default record source (Use values from LineMap)
MicBoost = 0 ; Default setting for +20dB microphone boost
MicVolumeMon = 50 ; Mic volume during monitor. Range 0..100, default 50.
; LOGICAL to PHYSICAL VOLUME TABLES
MasterVolumeTable =63,58,54,51,48,45,42,39,36,34,32,30,28,26,24,22,20,19,18,17,17,16,16,15,15,14,14,13,13,12,12,11,11,10,10,9,9,8,8,8,7,7,7,6,6,6,5,5,5,4,4,4,3,3,3,2,2,2,1,1,1,0,0,0
HeadphoneVolumeTable =63,58,54,51,48,45,42,39,36,34,32,30,28,26,24,22,20,19,18,17,17,16,16,15,15,14,14,13,13,12,12,11,11,10,10,9,9,8,8,8,7,7,7,6,6,6,5,5,5,4,4,4,3,3,3,2,2,2,1,1,1,0,0,0
MonoOutVolumeTable =63,58,54,51,48,45,42,39,36,34,32,30,28,26,24,22,20,19,18,17,17,16,16,15,15,14,14,13,13,12,12,11,11,10,10,9,9,8,8,8,7,7,7,6,6,6,5,5,5,4,4,4,3,3,3,2,2,2,1,1,1,0,0,0
;----------------------------------------------------------------------
PCMVolumeTable =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
MonoInVolumeTable =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
PhoneVolumeTable =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
MicVolumeTable =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
LineVolumeTable =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
CDVolumeTable =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
VideoVolumeTable =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
AuxVolumeTable =31,30,29,28,27,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8
; NOTE: PCMVolume input to AC97 mixer is fixed at 0dB (output=input).
; To adjust wave audio volume relative to other signals, see WaveSkewPercent.
RecordGainTable =0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
;----------------------------------------------------------------------
; Skew variables
;
MasterVolSkew = 0 ; Master volume adjustment (default: 0, no adjustment)
AltVolSkew = 0 ; Headphone volume adjustment
MonoOutSkew = 0 ; Mono out adjustment
PCMSkew = 0
MonoInSkew = 0
PhoneSkew = 0
MicSkew = 0
LineSkew = 0
CDSkew = 0 ; NOTE: CD listening level should be set with "CDVolume"
VideoSkew = 0
AuxSkew = 0
ADCGainSkew = 2 ; Adjustment to RECORD signal level
WaveSkewPercent = 66 ; 100 means no adjustment. 66 means 34% quieter.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.