;*****************************************************************************
;
; slabbus.inf -- Install the CP2101 USB Composite Device drivers
;
; Copyright (c) 1997-2004 by MCCI
;
; MCCI is a registered trademark of Moore Computer Consultants, Inc.
;
; NOTICE: This software is licensed, not sold. Any modification of this
; inf file to change the reference to an operating system or to change the
; reference to a device is not permitted unless authorized in writing by
; Moore Computer Consultants, Inc..
;
;*****************************************************************************
[version]
signature="$CHICAGO$"
Class=USB
ClassGuid={36FC9E60-c465-11cf-8056-444553540000}
Provider=%Provider%
DriverVer=03/16/2004, 4.20.0.2700
CatalogFile=slabbus.cat
[ControlFlags]
ExcludeFromSelect = *
;-----------------------------------------------------------------------------
; Specify target paths...
;-----------------------------------------------------------------------------
[DestinationDirs]
DefaultDestDir = 11 ; LDID_SYS
SLABWdm.W95.CopyFiles = 11 ; LDID_SYS
SLABWdm.NT.CopyFiles = 12 ; system32\drivers
SLABWdm.NT.CopyFiles2 = 11 ; system32
PropPages.CopyFiles = 11 ; system
;-----------------------------------------------------------------------------
; Specify the install disks. A bit unwieldy during development.
;-----------------------------------------------------------------------------
[SourceDisksNames]
; diskid = description[, [tagfile] [, <unused>, subdir]]
1=%DiskString%,"slabbus.sys",,
[SourceDisksFiles]
; filename = diskid[, [subdir] [, size]]
slabbus.sys = 1
slabwh95.sys = 1
slabwhnt.sys = 1
uninstall.exe = 1
unin98.exe = 1
uninstall.ini = 1
unin.ini = 1
;-----------------------------------------------------------------------------
; Table of Contents: manufacturer, then devices.
;-----------------------------------------------------------------------------
[Manufacturer]
%SLAB%=SLAB
;-----------------------------------------------------------------------------
; The devices
;-----------------------------------------------------------------------------
[SLAB]
%SLAB.CdcBus.Desc% = SLABWdm.Install, USB\VID_10C4&PID_EA60
;-----------------------------------------------------------------------------
; How to install them: On W9x, the [section] name is used directly.
; On NT, the system first tries [section.NT], then [section].
;-----------------------------------------------------------------------------
;-----------------------------------------------------------------------------
; Diagnostics Files CopyFiles List Section
;-----------------------------------------------------------------------------
[SLAB.CopyFiles]
;-----------------------------------------------------------------------------
; XXX when we have a property page DLL, add it to the following section.
;-----------------------------------------------------------------------------
[PropPages.CopyFiles]
;-----------------------------------------------------------------------------
; How to install the WDM driver on W95/W98
;-----------------------------------------------------------------------------
[SLABWdm.Install]
DriverVer=03/11/2004, 4.20.0.2700
CopyFiles = SLABWdm.W95.CopyFiles, SLAB.CopyFiles, PropPages.CopyFiles
AddReg = SLABWdm.AddReg, SLABWdm.W95.AddReg, SLABWdmUnInst.Reg
RemoveDevice = SLABWdm.RemDev
;-----------------------------------------------------------------------------
; How to install the WDM driver on NT
;-----------------------------------------------------------------------------
[SLABWdm.Install.NT]
DriverVer=03/11/2004, 4.20.0.2700
CopyFiles = SLABWdm.NT.CopyFiles, SLABWdm.NT.CopyFiles2
AddReg = SLABWdm.AddReg, SLABWdm.NT.AddReg, SLABWdmUnInst.NT.Reg
;-----------------------------------------------------------------------------
; How to start the WDM driver on NT
;-----------------------------------------------------------------------------
[SLABWdm.Install.NT.Services]
AddService = slabbus, 2, SLABWdm.AddService
[SLABWdm.AddService]
DisplayName = %SLAB.Service.Desc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\slabbus.sys
LoadOrderGroup = Base
;-----------------------------------------------------------------------------
; WDM registry entries (all platforms)
;-----------------------------------------------------------------------------
[SLABWdm.AddReg]
;-----------------------------------------------------------------------------
; WDM registry entries (W95/98) (including how to start the driver)
;-----------------------------------------------------------------------------
[SLABWdm.W95.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,slabbus.sys
;-----------------------------------------------------------------------------
; WDM registry entries (NT only)
;-----------------------------------------------------------------------------
[SLABWdm.NT.AddReg]
;-----------------------------------------------------------------------------
; The WDM copy list for Win95 -- different because things go in
; different places. Also, we probably need to rename drivers
; during the install.
;-----------------------------------------------------------------------------
[SLABWdm.W95.CopyFiles]
slabbus.sys
slabwh.sys,slabwh95.sys
slabwh95.sys
slabwhnt.sys
unin98.exe
unin98.ini
;-----------------------------------------------------------------------------
; The WDM copy list for NT -- different because things go in
; different places.
;-----------------------------------------------------------------------------
[SLABWdm.NT.CopyFiles]
slabbus.sys
slabwh.sys,slabwhnt.sys
slabwhnt.sys
[SLABWdm.NT.CopyFiles2]
uninstall.exe
uninstall.ini
;-----------------------------------------------------------------------------
; The WDM uninstall list and registry entries --
;
;-----------------------------------------------------------------------------
[SLABWdm.RemDev]
DELKEY=HKLM,%WINUN%\SLABCOMM
[SLABWdmUnInst.Reg]
HKLM,%WINUN%,"SLABCOMM"
HKLM,%WINUN%\SLABCOMM , "UninstallString",,"%11%\unin98.exe %11%\unin98.ini"
HKLM,%WINUN%\SLABCOMM , "DisplayName",,"CP2101 USB to UART Bridge Controller"
[SLABWdm.DelFiles]
uninstall.exe = 1
;-----------------------------------------------------------------------------
; The WDM uninstall list and registry entries for NT --
;
;-----------------------------------------------------------------------------
[SLABWdmUnInst.NT.Reg]
HKLM,%WINUN%,"SLABCOMM"
HKLM,%WINUN%\SLABCOMM , "UninstallString",,"%11%\uninstall.exe %11%\uninstall.ini"
HKLM,%WINUN%\SLABCOMM , "DisplayName",,"CP2101 USB to UART Bridge Controller"
;****************************************************************************
; Localizable Strings
;****************************************************************************
[strings]
;BEGIN ENG - US English Strings
Provider = "Silicon Laboratories"
SLAB = "Silicon Laboratories"
DiskString = "CP2101 USB Composite Device Installation disk"
WINUN="Software\Microsoft\Windows\CurrentVersion\Uninstall"
SLAB.CdcBus.Desc = "CP2101 USB Composite Device"
SLAB.Service.Desc = "CP2101 USB Composite Device driver (WDM)"
CustomerDataPath = "CP2101 USB to UART Bridge Controller"
DriverSet = "CP2101 USB to UART Bridge Controller Software"
;UninstallFile = "SLABUninstall.exe"
;McciOptions = "Uninstallable"
;END ENG - US English Strings
;-----------------------------------------------------------------------------
; Following are symbolic constants which don't change per locale.
;-----------------------------------------------------------------------------
;*** end of file ***
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.