1. mvpfx_14.11.10.exe Driver
2. mvpfx141110.txt File Contents

mvpfx141110.txt Driver File Contents (mvpfx_14.11.10.exe)

Installation instructions for MultiVOIP 210-fx/410-fx/810-fx software vs 14.11

   <Caution> 

   MultiVOIP's
   Uninstall Solution 
   Product Update
   PN: 82010180 Rev. A
   02/16/04

   Before uninstalling any old versions of MultiVOIP software,
   install the new MultiVOIP Software provided for this readme.

1. Run mvpfx_14.11.0h.exe to unzip the install files. The install files will be
   unzipped to the directory C:\mvpfx141110.

3. Go to the folder C:\mvpfx141110\disk1 and run setup.exe to install the 
   software to the pc. Accept the default installation folder and program
   group name. When prompted, select the comm. port that you will use with 
   the MultiVOIP.  Click "No" when asked if you would like to run
   configuration.

4. Connect the MVP210-fx/410-fx/810-fx to the PC comm. port and power it on.
   When the boot light is off, go to step 5.

5. Run Start->Programs->MultiVOIP 14.11->Configuration and
   configure the MultiVOIP for your application. 

FTP upgrade instructions.

1. ftp the file "mvpt1ftp.bin" from C:\Program Files\Multi-Tech Systems\MultiVOIP 14.11
2. WEB/Java to the MultiVoIP and check configuration/system information and confirm firmware version as 14.11.10. 

Note: You will be able to manage and configure the voip with WEB interface
using a Java plug in for the browser. You can retrieve vs. 1.4.02.01 from 
our ftp server at ftp://ftp.multitech.com/MultiVoip/Misc/java/j2re-1_4_2_01/
After installing, reboot your PC.