1. vista32.zip Driver
2. umpcom.inf File Contents

umpcom.inf Driver File Contents (vista32.zip)

;******************************************************************************
;*   COPYRIGHT (C) 2002-2005 TEXAS INSTRUMENTS INCORPORATED.
;*   ALL RIGHTS RESERVED. ONLY USE WITH TEXAS INSTRUMENTS SILICON.
;******************************************************************************
;*
;*   FILE:           umpcom.INF
;*   SUBSYSTEM:      UMP Devices
;*
;*   ABSTRACT:       Texas Instruments Driver Installation file for
;*                   a UMP Serial Port
;*   
;*   Version :       2.0 
;*
;*   DRG 09-05-08 Changes for signing. 6.6.1000.1
;* 
;******************************************************************************
;*
[Version]
Signature="$WINDOWS NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%TIInc%
DriverVer=09/05/2008,6.6.1000.1
CatalogFile=UMPCOMvista32.cat

[ControlFlags]
ExcludeFromSelect = umpport\VID_06E0_com
ExcludeFromSelect = umpport\VID_0451_port1
ExcludeFromSelect = umpport\VID_0451_port2

[DestinationDirs]
;SerialEnumerator.NT.Copy=12  ;DIRID_DRIVERS
;TIUMPSER.NT.CopyFiles=12
DefaultDestDir = 11

[SourceDisksNames]
1=%DiskString%

[SourceDisksFiles]
umpusbvista.sys = 1

; -----------------------------------------------------------------------------
; Table of Contents:  manufacturer, then devices.
; -----------------------------------------------------------------------------
[Manufacturer]
%TIUMP%=TIUMP,NTx86, NTamd64, NTia64

; -----------------------------------------------------------------------------
; The devices
; -----------------------------------------------------------------------------
[TIUMP]
; ****  Release 1.2.10.96: These lines replace line with "umpport\com" *****
; ****    Vendor replace Texas Instruments VID with your own VID       *****
; single port on 3410:
%TIUMP.Com.Desc% = TIUMPSER.Install, umpport\VID_06E0_com
; the two ports on a 5x52:
%TIUMP.Port1.Desc% = TIUMPSER.Install, umpport\VID_0451_port1
%TIUMP.Port2.Desc% = TIUMPSER.Install, umpport\VID_0451_port2
; ****

; -----------------------------------------------------------------------------
; The devices
; -----------------------------------------------------------------------------
[TIUMP.NTx86]
; ****  Release 1.2.10.96: These lines replace line with "umpport\com" *****
; ****    Vendor replace Texas Instruments VID with your own VID       *****
; single port on 3410:
%TIUMP.Com.Desc% = TIUMPSER.Install, umpport\VID_06E0_com
; the two ports on a 5x52:
%TIUMP.Port1.Desc% = TIUMPSER.Install, umpport\VID_0451_port1
%TIUMP.Port2.Desc% = TIUMPSER.Install, umpport\VID_0451_port2
; ****

[TIUMP.NTamd64]
; ****  Release 1.2.10.96: These lines replace line with "umpport\com" *****
; ****    Vendor replace Texas Instruments VID with your own VID       *****
; single port on 3410:
%TIUMP.Com.Desc% = TIUMPSER.Install, umpport\VID_06E0_com
; the two ports on a 5x52:
%TIUMP.Port1.Desc% = TIUMPSER.Install, umpport\VID_0451_port1
%TIUMP.Port2.Desc% = TIUMPSER.Install, umpport\VID_0451_port2
; ****

[TIUMP.NTia64]
; ****  Release 1.2.10.96: These lines replace line with "umpport\com" *****
; ****    Vendor replace Texas Instruments VID with your own VID       *****
; single port on 3410:
%TIUMP.Com.Desc% = TIUMPSER.Install, umpport\VID_06E0_com
; the two ports on a 5x52:
%TIUMP.Port1.Desc% = TIUMPSER.Install, umpport\VID_0451_port1
%TIUMP.Port2.Desc% = TIUMPSER.Install, umpport\VID_0451_port2
; ****

; -----------------------------------------------------------------------------
; Class Installer
; -----------------------------------------------------------------------------
[ClassInstall32.NT]
AddReg=PortsClass.NT.AddReg

[PortsClass.NT.AddReg]
HKR,,,,%PortsClassName%
HKR,,Icon,,"-23"
HKR,,Installer32,,"MsPorts.Dll,PortsClassInstaller"


; -----------------------------------------------------------------------------
;       TIUMPSER.SYS Device installation
; -----------------------------------------------------------------------------

; -----------------------------------------------------------------------------
;       How to install the WDM driver on NT
; -----------------------------------------------------------------------------
[TIUMPSER.Install.NT]
;Include=msports.inf
;Needs=SerialEnumerator.NT
CopyFiles                       = TIUMPSER.NT.CopyFiles
;CopyFiles                       = SerialEnumerator.NT.Copy
AddReg                          = TIUMPSER.NT.AddReg
; addreg and copy files for serenum.sys

; -----------------------------------------------------------------------------
;       How to start the WDM driver on NT
; -----------------------------------------------------------------------------
[TIUMPSER.Install.NT.Services]
;Include=msports.inf
;Needs=SerialEnumerator.NT.Services
AddService              = umpusbvista, 0x00000002, TIUMPSER.AddService
; install the serenum service itself

[TIUMPSER.AddService]
DisplayName             = %TIUMP.Com.ServiceDesc%
ServiceType             = 1     ; SERVICE_KERNEL_DRIVER
StartType               = 3     ; SERVICE_DEMAND_START
ErrorControl            = 1     ; SERVICE_ERROR_NORMAL
ServiceBinary           = %12%\umpusbvista.sys
LoadOrderGroup          = Extended Base

; -----------------------------------------------------------------------------
;       WDM registry entries (NT only)
; -----------------------------------------------------------------------------
[TIUMPSER.NT.AddReg]
HKR,,PortSubClass,1,01
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

; -----------------------------------------------------------------------------
;       The WDM copy list for NT -- different because things go in
;       different places.
; -----------------------------------------------------------------------------
[TIUMPSER.NT.CopyFiles]
;umpusbvista.sys


; -----------------------------------------------------------------------------
;   The Hardware list for NT.  This comes from msports.inf for ComPorts.
; -----------------------------------------------------------------------------
[TIUMPSER.Install.NT.HW]
AddReg = TIUMPSER.NT.HW.AddReg

[TIUMPSER.NT.HW.AddReg]
HKR,,"UpperFilters", 0x00010000, "umpserenum"

;
;--- 3410_Device WDF Coinstaller installation ------
;
[DestinationDirs]
TIUMPSER_Device_CoInstaller_CopyFiles = 11

[TIUMPSER_Device.NT.CoInstallers]
AddReg=TIUMPSER_Device_CoInstaller_AddReg
CopyFiles=TIUMPSER_Device_CoInstaller_CopyFiles

[TIUMPSER_Device_CoInstaller_AddReg]
HKR,,CoInstallers32,0x00010000, "wdfcoinstaller01005.dll,WdfCoInstaller"

[TIUMPSER_Device_CoInstaller_CopyFiles]
wdfcoinstaller01005.dll

[SourceDisksFiles]
wdfcoinstaller01005.dll=1 ; make sure the number matches with SourceDisksNames

[TIUMPSER_Device.NT.Wdf]
KmdfService = TIUMPSER, TIUMPSER_wdfsect
[TIUMPSER_wdfsect]
KmdfLibraryVersion = 1.5

; -----------------------------------------------------------------------------
; Localizable Strings
; -----------------------------------------------------------------------------


[Strings]

TIInc="Texas Instruments"
DiskString= " "
PortsClassName= "UMP USB Serial Port "
TIUMP= "Texas Instruments"
TIUMP.Com.ServiceDesc   = "UMP Serial Port Driver "
DiskId = "TI UMP Installation Disk "
StandardUMPUSB.SvcDesc="Texas Instruments UMP Device Driver "
; ****  Release 1.2.10.96: One of these names displays in the Device Manager list *****
TIUMP.Com.Desc          = "USB - Serial Port"
TIUMP.Port1.Desc          = "USB - 1st Serial Port"
TIUMP.Port2.Desc          = "USB - 2nd Serial Port"
; ****
TIUMP.Service.Desc      = "UMP USB Serial Port "
UpperDescription        = "UMP USB Serial Port "


;END ENG - US English Strings
;*** end of file ***