KN9C_11.TXT Driver File Contents (kn9c11.zip)

              BIOS release 1.1 for KN9

Release information:

[ENGLISH]

1.	Enhanced compatibility with certain memories.
2.	Support DRAM "CAS Latency and Command rate" adjusting function.
3.	The AuxFan2 now works as intended after resuming from S3.
4.	The "Wake up by PME# of PCI function" now works as intended.
5.	Fixed the issue that the system sometimes may not be able to boot when install the CPU A64 X2 3800+ "ADA3800IAA5CU".
6.	Fixed the issue that the CPU Vcore of Sempron 3000+ were not correctly.
7.	BIOS compiled date: 09/22/2006




[¤¤¤å]

1.	­×¥¿°O¾ÐÅé¬Û®e©Ê°ÝÃD.
2.	·s¼W¤ä´©"CAS Latency and Command rate"¥\¯à¿ï¶µ.
3.	­×¥¿AuxFan2¦bS3 resume«á¡A¥\¯à¤£¥¿±`ªº°ÝÃD.
4.	­×¥¿"Wake up by PME# of PCI function"¥\¯à.
5.	­×¥¿A64 X2 3800+ "ADA3800IAA5CU"¶}¾÷°ÝÃD.
6.	­×¥¿Sempron 3000+ CPU¹qÀ£¤£¥¿½T°ÝÃD.
7.	BIOS compiled date: 09/22/2006





*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "KN9C11.ZIP" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.47