MsWin98.txt Driver File Contents (ENLGA-1310B.zip)

=======================================================================
   Windows 98
=======================================================================
   Introduction:
   -------------
   This document describes the procedure to install Windows 98 driver for
   Gigabit Ethernet Network Adapter.
 
   Location of Windows 98 Driver:   \WIN98\RIOND4.SYS
                                    \WIN98\NETRIO.INF 

   Installing driver for Win98:
   -------------------------------------------------------------------
      Before you start with the installation process, make sure that your
      adapter should be properly installed in your PCI bus slot. Executing 
      Win98, it will auto-detect your system configuration and find the 
      adapter hardware.( If Win98 does not prompt that it detects the PCI
      Ethernet adapter,there must be something wrong with Gigabit Ethernet
      Network Adapter or your system enviroment.)

      1. Ask you to select which driver you want to install, select "Driver
         from disk provided by hardware manufacturer".

      2. Insert the Gigabit Ethernet Network Adapter driver disk into 
         drive A and specify the setup file pathname A:\WIN98.   
                                 
      3. Win98 will appear some messages to insert Win98 system disk to 
         complete setup step.

      4. Win98 will finish the other installation procedure automatically, 
         then you restart the system.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.15