; OEMSETUP FILE FOR SMCPWR Ethernet adapters , v4.22.1 ; NDIS 3.1 - Windows NT 3.51 - ; ; Supported adapters: ; SMC 8432 EtherPower Without Boot ROM Socket ; SMC 8432 EtherPower With Boot ROM Socket ; SMC 8434 EtherPower^2 PCI Ethernet Adapter ; SMC 9332DST EtherPower10/100 PCI Fast Ethernet Adapter ; SMC 9332BDT EtherPower10/100 PCI Fast Ethernet Adapter ; SMC 9334BDT EtherPower10/100 Dual Channel PCI Fast Ethernet Adapter ; SMC 9332BVT EtherPower10/100T4 PCI Fast Ethernet Adapter ; SMC DC21143 EtherPower10/100 PCI Fast Ethernet Adapter ; ; Usage: ; ; This file is the installation/configuration/deinstallation ; procedure of the SMCPWR driver for Windows NT. It can be ; called from Windows Setup directly, or via the Windows NT ; Networks Control Program Applet (NCPA) from inside the Windows ; Control Panel. ; ;---------------------------------------------------------------------------------------- [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA "Jazz-Internal Bus" PCI [Options] SMC8432 SMC8432e SMC8434 SMC9332 SMC9332BDT SMC9332BVT SMCDC21143 [ConnectionChoicesSMC8432] Connect_0 = "AutoDetect", 0 Connect_1 = "10BaseT (Twisted_Pair)", 2 Connect_2 = "10BaseT Full_Duplex", 3 Connect_3 = "10BaseT No_Link_Test", 4 Connect_4 = "10Base2 (BNC)", 1 Connect_5 = "10Base5 (AUI)", 5 [ConnectionChoicesSMC8432e] Connect_0 = "AutoDetect", 0 Connect_1 = "10BaseT (Twisted_Pair)", 2 Connect_2 = "10BaseT Full_Duplex", 3 Connect_3 = "10BaseT No_Link_Test", 4 Connect_4 = "10Base2 (BNC)", 1 Connect_5 = "10Base5 (AUI)", 5 [ConnectionChoicesSMC8434] Connect_0 = "AutoDetect", 0 Connect_1 = "10BaseT (Twisted_Pair)", 2 Connect_2 = "10BaseT Full_Duplex", 3 Connect_3 = "10BaseT No_Link_Test", 4 Connect_4 = "10Base5 (AUI)", 5 [ConnectionChoicesSMC9332] Connect_0 = "AutoDetect", 0 Connect_1 = "100 Mbps", 8 Connect_2 = "100 Mbps Full_Duplex", 9 Connect_3 = " 10 Mbps", 2 [ConnectionChoicesSMC9332BDT] Connect_0 = "AutoSense", 0 Connect_2 = "100 Mbps", 8 Connect_3 = "100 Mbps Full_Duplex", 9 Connect_6 = " 10 Mbps", 2 Connect_7 = " 10 Mbps Full_Duplex", 3 [ConnectionChoicesSMC9332BVT] Connect_0 = "AutoSense", 0 Connect_4 = "100 Mbps T4", 10 Connect_7 = " 10 Mbps", 2 Connect_8 = " 10 Mbps Full_Duplex", 3 [ConnectionChoicesSMCDC21143] Connect_0 = "AutoSense", 0 Connect_2 = "100 Mbps", 8 Connect_3 = "100 Mbps Full_Duplex", 9 Connect_6 = " 10 Mbps", 2 Connect_7 = " 10 Mbps Full_Duplex", 3 [FileConstants] UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "SMCNetworksInc" ProductMajorVersion = "4" ProductMinorVersion = "22" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) VendorID = 4113 ;; 1011 (DEC) ProductSoftwareName = "SMCPWR" ProductSoftwareTitle = "SMCPWR Adapter Driver" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\smcpwrn.sys" NetRuleSoftwareType = "SMCPWRSys ndisDriver SMCPWRDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """SMCPWRSys"" yes no container" NetRuleSoftwareClass = {"SMCPWRDriver basic"} NetRuleSoftwareSWBindable = {"SMCPWRDriver SMC8432Adapter non exclusive 100",+ "SMCPWRDriver SMC8432eAdapter non exclusive 100",+ "SMCPWRDriver SMC8434Adapter non exclusive 100",+ "SMCPWRDriver SMC9332Adapter non exclusive 100",+ "SMCPWRDriver SMC9332BDTAdapter non exclusive 100",+ "SMCPWRDriver SMC9332BVTAdapter non exclusive 100",+ "SMCPWRDriver SMCDC21143Adapter non exclusive 100"} ProductHardwareName = "SMCPWR" ProductHardwareSMC8432Title = "SMC8432 EtherPower without ROM Socket" NetRuleHardwareSMC8432Type = "SMC8432 SMC8432Adapter" NetRuleHardwareSMC8432Class = {"SMC8432Adapter basic"} AdapterSMC8432Type = 5 ;; PCI board HelpSMC8432Id = 10 SMC8432CFID = 135185 ;; 0x00021011 ProductHardwareName = "SMCPWR" ProductHardwareSMC8432eTitle = "SMC8432 EtherPower with ROM Socket" NetRuleHardwareSMC8432eType = "SMC8432e SMC8432eAdapter" NetRuleHardwareSMC8432eClass = {"SMC8432eAdapter basic"} AdapterSMC8432eType = 5 ;; PCI board HelpSMC8432eId = 11 SMC8432eCFID = 1314833 ;; 0x00141011 ProductHardwareName = "SMCPWR" ProductHardwareSMC8434Title = "SMC8434 EtherPower2" NetRuleHardwareSMC8434Type = "SMC8434 SMC8434Adapter" NetRuleHardwareSMC8434Class = {"SMC8434Adapter basic"} AdapterSMC8434Type = 5 ;; PCI board HelpSMC8434Id = 20 SMC8434CFID = 135185 ;; 0x00021011 ProductHardwareSMC9332Title = "SMC9332DST EtherPower10/100" NetRuleHardwareSMC9332Type = "SMC9332 SMC9332Adapter" NetRuleHardwareSMC9332Class = {"SMC9332Adapter basic"} AdapterSMC9332Type = 5 ;; PCI board HelpSMC9332Id = 30 SMC9332CFID = 593937 ;; 0x00091011 OptionHelpFile = "SMCPWRN.hlp" ProductHardwareSMC9332BDTTitle = "SMC9332BDT/9334BDT EtherPower10/100" NetRuleHardwareSMC9332BDTType = "SMC9332BDT SMC9332BDTAdapter" NetRuleHardwareSMC9332BDTClass = {"SMC9332BDTAdapter basic"} AdapterSMC9332BDTType = 5 ;; PCI board HelpSMC9332BDTId = 30 SMC9332BDTCFID = 593937 ;; 0x00091011 OptionHelpFile = "SMCPWRN.hlp" ProductHardwareSMC9332BVTTitle = "SMC9332BVT EtherPower10/100T4" NetRuleHardwareSMC9332BVTType = "SMC9332BVT SMC9332BVTAdapter" NetRuleHardwareSMC9332BVTClass = {"SMC9332BVTAdapter basic"} AdapterSMC9332BVTType = 5 ;; PCI board HelpSMC9332BVTId = 30 SMC9332BVTCFID = 593937 ;; 0x00091011 OptionHelpFile = "SMCPWRN.hlp" ProductHardwareSMCDC21143Title = "SMC DC21143 EtherPower10/100 PCI Fast Ethernet Adapter" NetRuleHardwareSMCDC21143Type = "SMCDC21143 SMCDC21143Adapter" NetRuleHardwareSMCDC21143Class = {"SMCDC21143Adapter basic"} AdapterSMCDC21143Type = 5 ;; PCI board HelpSMCDC21143Id = 50 SMCDC21143CFID = 1642513 ;; 0x00191011 OptionHelpFile = "SMCPWRN.hlp" StoreAndForward = 0 ;; Store_and_forward mode disabled DC21041CFID = 1314833 ;; 0x00141011 DC21140CFID = 593937 ;; 0x00091011 DC21143CFID = 1642513 ;; 0x00191011 DC21142CFID = 1642513 ;; 0x00191011 NetRuleHardwareBindForm = " yes yes container" ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants set NetRuleSoftwareBindable = $($R1) read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(Function$(Option)Title) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo else set StartLabel = configureadapter endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif Endif ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) install "Install-Hlp" endif Goto installproduct configureadapter = + Ifstr(i) $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Goto fatalregistry Endif Endif Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "DataRate" set ConnectionIndex = $(ValueData) endif EndForListDo set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex))) ifstr(i) $(ConnectionValue) == "" set ConnectionValue = *($(ConnectionList), 2) endif adapteroptions = + set from = adapteroptions read-syms FileDependentDlg$(!STF_LANGUAGE) SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set ConnectionIndex = $(Combo1Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else ui pop 1 goto end endif set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex))) ifstr(i) $(!NTN_InstallMode) == configure goto updateparameters endif installproduct =+ StartWait set-div DeviceID = $($(Option)CFID) 65536 Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R0) == {} set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = USER_CANCEL set from = end goto nonfatal endif set AdapterList = $($R0) ifint $(OldVersionExisted) == $(FALSE) Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait goto fatalregistry endif endif ForListDo $(AdapterList) set BusNum = *($($),1) set DeviceNum = *($($),2) set FunctionNum = *($($),3) Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != "YES" ifstr(i) $(!STF_GUI_UNATTENDED) != "YES" read-syms FileDependentDlg$(!STF_LANGUAGE) SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set ConnectionIndex = $(Combo1Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else ui pop 1 goto end endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex))) Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) Set HardParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set BusTypeNum = 5 set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifint $($(Option)CFID) == $(DC21041CFID) set NewValueList = {{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set NewValueList = {{NwayProtocol,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif ifint $($(Option)CFID) == $(DC21142CFID) set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StoreAndForward)},+ {SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set NewValueList = {{NwayProtocol,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif ifint $($(Option)CFID) == $(DC21143CFID) set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StoreAndForward)},+ {SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif ifint $($(Option)CFID) == $(DE450CFID) set NewValueList = {{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif ifint $($(Option)CFID) == $(DC21140CFID) set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StoreAndForward)},+ {TransmitThreshold100,$(NoTitle),$(!REG_VT_DWORD),$(TxmThreshold100)},+ {SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif set NewValueList = {{DataRate,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) CloseRegKey $(HardParameterKey) endif EndForListDo ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif EndWait goto successful updateparameters =+ set HardParameterKey = $($R3) set NewValueList = {{DataRate,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(KeyParameters) goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Hlp] set STF_VITAL = "" AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "SMC EtherPower NDIS 3.1 Driver" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 STF_PLATFORM = PPC STF_PLATFORM = Alpha [Files-Inf] 2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename) [Files-SMC8432] 1,WIN95NT\SMCPWRN.SY_ , SIZE=999, RENAME=SMCPWRN.SYS [Files-SMC8432e] 1,WIN95NT\SMCPWRN.SY_ , SIZE=999, RENAME=SMCPWRN.SYS [Files-SMC8434] 1,WIN95NT\SMCPWRN.SY_ , SIZE=999, RENAME=SMCPWRN.SYS [Files-SMC9332] 1,WIN95NT\SMCPWRN.SY_ , SIZE=999, RENAME=SMCPWRN.SYS [Files-SMC9332BDT] 1,WIN95NT\SMCPWRN.SY_ , SIZE=999, RENAME=SMCPWRN.SYS [Files-SMC9332BVT] 1,WIN95NT\SMCPWRN.SY_ , SIZE=999, RENAME=SMCPWRN.SYS [Files-SMCDC21143] 1,WIN95NT\SMCPWRN.SY_ , SIZE=999, RENAME=SMCPWRN.SYS [Files-Hlp] 1,WIN95NT\SMCPWRN.HL_ , SIZE=999, RENAME=SMCPWRN.HLP [LanguagesSupported] ENG [OptionsTextENG] SMC8432 = "SMC8432 EtherPower without ROM Socket" SMC8432e = "SMC8432 EtherPower with ROM Socket" SMC8434 = "SMC8434 EtherPower2" SMC9332 = "SMC9332DST EtherPower10/100" SMC9332BDT = "SMC9332BDT/9334BDT EtherPower10/100" SMC9332BVT = "SMC9332BVT EtherPower10/100T4" SMCDC21143 = "SMC DC21143 EtherPower10/100 PCI Fast Ethernet Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ProductSoftwareDescription = "SMCPWR Adapter Driver" FunctionSMC8432Title = "SMC8432 Adapter Card Setup" ProductHardwareSMC8432Description = "SMC8432 EtherPower without ROM Socket" FunctionSMC8432eTitle = "SMC8432 Adapter Card Setup" ProductHardwareSMC8432eDescription = "SMC8432 EtherPower with ROM Socket" FunctionSMC8434Title = "SMC8434 Adapter Card Setup" ProductHardwareSMC8434Description = "SMC8434 EtherPower2" ;FunctionSMC9332Title = "SMC9332DST Adapter Card Setup" ;ProductHardwareSMC9332Description = "SMC9332DST EtherPower10/100" FunctionSMC9332BDTTitle = "SMC9332BDT/9334BDT Adapter Card Setup" ProductHardwareSMC9332BDTDescription = "SMC9332BDT/9334BDT EtherPower10/100" FunctionSMC9332BVTTitle = "SMC9332BVT Adapter Card Setup" ProductHardwareSMC9332BVTDescription = "SMC9332BVT EtherPower10/100T4" FunctionSMCDC21143Title = "SMC DC21143 Adapter Card Setup" ProductHardwareSMCDC21143Description = "SMCDC21143 EtherPower10/100 PCI Fast Ethernet Adapter" ConnectionList = ^(ConnectionChoices$(Option), 1) ConnectionValues = ^(ConnectionChoices$(Option), 2) NoList = ^(NoChoices, 1) NoValues = ^(NoChoices, 2) ShellCodeErrorTitle = "Error: "$(Function$(Option)Title) ShellCodeErrorText = "Shell Code Error." CANNOT_FIND_ANY_CARD = "Network card is not present in the system" [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] DlgText = "Choose the proper cable type for the "+ "network adapter. Select [Help] for a detailled "+ "description of the available options of the list." DlgTemplate = "ADAP_PROTO_COMBO" DlgType = "Combination" Caption = $(Function$(Option)Title) Combo1Label = "&Data Rate:" Combo1List = $(ConnectionList) Combo1Out = $(ConnectionValue) ComboListItemsIn = {Combo1List} ComboListItemsOut = {Combo1Out} EditTextLim = "" CBOptionsGreyed = {} MinHelpId = 10 MaxHelpId = 1140 HelpContext = $(Help$(Option)Id)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.