LANMAN.TXT Driver File Contents (8036TX_DRv104_All.exe)

*******************************************************************************
*                             SMC Networks, Inc.                              *
*                        EZ CardBus-II 10/100 PC Card                         *
*                                                                             *
*                 NDIS/2 Driver For LAN Manager Installation                  *
*                                                                             *
*                    Copyright (C) 2001 SMC Networks, Inc.                    *
*                            All Rights Reserved.                             *
*******************************************************************************

The EZ CardBus-II 10/100 PC Card drivers in the MSLANMAN.DOS diectory conform
to the Network Driver Interface Specification (NDIS) 2.0 as defined by
Microsoft/3Com.

SMCOPEN.EXE is the EZ CardBus-II 10/100 PC Card enabling program for the MS-DOS
system. Before you can use any of the DOS mode drivers, such as the Novell DOS
ODI driver, the NDIS2 driver, the packet driver, or the diagnostic program, you
have to run SMCOPEN.EXE to enable the EZ CardBus-II 10/100 PC Card first.

NDIS 2 Driver Installation on LAN Manager v2.0
==============================================

  1. Type "Setup" in the LAN Manager directory and press Enter.

  2. Choose "Import Network Drivers..." in the "Action" field.
     Press <Enter> to continue.

  3. Insert your Driver Diskette into either drive A: or B:.
     Then press <Enter> to see the list of Imported Network
     Drivers on the screen.

  4. Press the <Space> Bar to select the appropriate Network Adapter
     (i.e. "SMC EZ CardBus-II 10/100 PC Card"), then press
     <Enter> to confirm your choice.

  5. Follow screen instructions to complete the process, until the Network
     Driver appears on screen.

  6. Identify your Network Adapter if asked. For example, select
     "SMC EZ CardBus-II 10/100 PC Card" to confirm any
     EZ CardBus-II Adapter.

  7. Select the <Add driver> and the <Add protocol> options. Then select
     <OK> to confirm your choices. The Workstation's primary parameters
     should appear on screen.

  8. Respond to all prompts issued on screen to complete the process.
     Select <OK> to confirm a choice.

  9. Save all selections. Choose "Save" from the "Action Menu".

 10. Press <F3> to exit.

 11. Copy A:\SMCOPEN\SMCOPEN.EXE to a directory on the hard disk
     (e.g. C:\SMCOPEN\SMCOPEN.EXE).
     Modify the CONFIG.SYS file by following the sample CONFIG.SYS file below.


NDIS 2 Driver Installation on LAN Manager v2.1
==============================================

  1. Type "lmsetup" in the LAN Manager directory and press <Enter>. The
     Microsoft LAN Manager Setup screen should appear.

  2. Choose "Network Drivers..." in the "Configuration" field. Press <Enter>
     to confirm your choice.

  3. Choose <Add New Configs> and press <Enter> to display a list of Network
     Adapter Drivers.

  4. Choose <Other Driver> and press <Enter>.

  5. Insert the Driver Diskette into drive A: or B: of your PC. Indicate the
     drive location of the diskette and select <OK> to proceed.

  6. Select the appropriate Network Adapter Driver from the list. For
     example, select "SMC EZ CardBus-II 10/100 PC Card",
     Select <OK> to confirm your choice.

  7. Select an appropriate protocol. Use the <Space> bar to highlight your
     choice.

  8. Select <OK> to confirm your choice.  A Configuration Complete message
     should appear on screen.

  9. Save the configuration. Select <Save>.

 10. Press <F3> to exit.

 11. Copy A:\SMCOPEN\SMCOPEN.EXE to a directory on the hard disk
     (e.g. C:\SMCOPEN\SMCOPEN.EXE).
     Modify the CONFIG.SYS file by following the sample CONFIG.SYS file below.


NDIS 2 Driver Installation on LAN Manager v2.2
==============================================

  1. Type "Setup" in the LAN Manager directory(i.e. C:\LANMAN.DOS) and press
     <Enter>. The Microsoft LAN Manager Setup screen should appear.

  2. Choose "Network Drivers" from the "Configuration" field. Press <Enter>
     to confirm your choice.

  3. Choose <Add New Config> and press <Enter> to display a list of Network
     Adapter Drivers.

  4. Insert the Driver Diskette into drive A: or B: of your PC. Indicate the
     drive location of the diskette.

  5. Choose <Other Driver> and press <Enter>.

  6. Select the appropriate Network Adapter Driver from the list.
     For example, select "SMC EZ CardBus-II 10/100 PC Card",
     Select <OK> to confirm your choice.

  7. Select an appropriate protocol. Use the <Space bar> to highlight your
     choice. If you have chosen the TCP/IP protocol, you will be prompted to
     key in the IP address, the subnet mask, and the default gateway
     (router). By default, the workstation number of the NetBios session is
     set to 6.
     Please consult Microsoft LAN Manager Installation Manual for more
     details, or check the online help.

  8. Select <OK> to confirm your choice.  A Configuration Complete message
     should appear onscreen.

  9. Save the configuration. Select <Save>.

 10. Press <F3> to exit.

 11. Copy A:\SMCOPEN\SMCOPEN.EXE to a directory on the hard disk
     (e.g. C:\SMCOPEN\SMCOPEN.EXE).
     Modify the CONFIG.SYS file by following the sample CONFIG.SYS file below.


If you are installing the LAN Manager for the first time, you will be
prompted to key in the default user name and domain of the workstation, as
well as to answer the questions concerning the Windows environment and
memory management. Just follow the instructions on the screen.


Sample Configuration Files
==========================

LAN Manager 2.0

  CONFIG.SYS File

      LASTDRIVE=Z
      BUFFERS = 35
      FILES = 35
      SHELL=C:\DOS50\COMMAND.COM C:\DOS50 /p /E:1024
      DEVICE=C:\HIMEM.SYS
      DEVICE=C:\DOS50\SETVER.EXE
      DOS=HIGH,UMB
      DEVICE=C:\SMCOPEN\SMCOPEN.EXE
      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\SMC\SMCEZ2\SMCEZ2.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS

  PROTOCOL.INI File

      [PROTOCOL MANAGER]
       DRIVERNAME = PROTMAN$
      [NETBEUI_XIF]
       Drivername = netbeui$
       BINDINGS = "SMCEZ2_NIF"
      [SMCEZ2_NIF]
     ;----------------------------------------------------------------------
     ; Sample Protocol.ini file for SMCEZ2 NDIS 2 driver
     ;----------------------------------------------------------------------
       DriverName = SMCEZ2$
     ; Slot = 1            ;; {1-4}
     ; MEDIA = AUTODETECT
     ;; {MEDIA = UTP, UTP_FD, UTP_100,UTP_100FD, AUTODETECT}
     ;----------------------------------------------------------------------
     ; End of this sample file

  AUTOEXEC.BAT File

        @echo off
        PROMPT $P$G
        PATH=c:\PE2;C:\DOS50;C:\NC;
        APPEND=C:\PE2;C:\DOS50;
        REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
        SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
        C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND
        NET START WORKSTATION
        REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES

LAN Manager 2.1 or LAN Manager 2.2

  CONFIG.SYS File

        LASTDRIVE=Z
        BUFFERS = 35
        FILES = 35
        SHELL=C:\DOS62\COMMAND.COM C:\DOS62 /p /E:1024
        DEVICE=C:\HIMEM.SYS
        REM DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS
        DOS=HIGH,UMB
        DEVICE=C:\SMCOPEN\SMCOPEN.EXE
        DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
        DEVICE=C:\LANMAN.DOS\DRIVERS\SMC\SMCEZ2\SMCEZ2.DOS

  PROTOCOL.INI File

        [PROTMAN]
         DRIVERNAME = PROTMAN$
         DYNAMIC = YES
         PRIORITY = NETBEUI
        [NETBEUI_XIF]
         Drivername = netbeui$
         SESSIONS = 6
         NCBS = 12
         BINDINGS = "SMCEZ2_NIF"
         LANABASE = 0

        [SMCEZ2_NIF]
        ;-------------------------------------------------------------------
        ; Sample Protocol.ini file for SMC8034/8036 NDIS 2 driver
        ;-------------------------------------------------------------------
          DriverName = SMCEZ2$
        ; Slot = 1            ;; {1-4}
        ; MEDIA = AUTODETECT
        ;; {MEDIA = UTP, UTP_FD, UTP_100,UTP_100FD, AUTODETECT}
        ;-------------------------------------------------------------------
        ; End of this sample file

  AUTOEXEC.BAT File

        @echo off
        PROMPT $P$G
        PATH=c:\PE2;C:\DOS62;C:\NC;
        APPEND=C:\PE2;C:\DOS62;
        @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
        @REM=== LANMAN 2.1 ===
        SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
        NET START WORKSTATION
        LOAD NETBEUI
        @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
        @REM === LANMAN 2.1 ===

TRADEMARKS
==========
All Tademarks or Brand names mentioned are properties of their respective
companies.
== End of File ==
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.95