******************************************************************************* * SMC Networks, Inc. * * EZ CardBus-II 10/100 PC Card * * * * NetWare ODI Client Driver For DOS Workstation * * * * Copyright (C) 2001 SMC Networks, Inc. * * All Rights Reserved. * ******************************************************************************* This file is an explanation of the files contained in the \DOSODI subdirectory of this diskette and their usage. For more information please refer to "NOVELL NetWare ODI Shell for DOS" manual. Installation Procedure ====================== Before you start with the installation process, make sure that the adapter is properly installed and configured. Make sure that your NetWare operating system is properly installed. If there are Netware client programs such as: LSL.COM, IPXODI, and VLM.EXE in your system already, you can use the following procedures to setup your system. SMCOPEN.EXE is the EZ CardBus-II 10/100 PC Card enabling program for the MS-DOS system. Before you can use any of the DOS mode drivers, such as the Novell DOS ODI driver, the NDIS2 driver, the packet driver, or the diagnostic program, you have to run SMCOPEN.EXE to enable the EZ CardBus-II 10/100 PC Card first. 1. Copy the A:\DOSODI\SMCEZ.COM and A:\SMCOPEN\SMCOPEN.EXE to the Netware client directory which contains NET.CFG, LSL.COM, IPXODI.COM, and VLM.EXE with related *.VLM files. 2. Update the NET.CFG file. You can refer to the NET.CFG sample. 3. Make sure to add LASTDRIVE=Z in your CONFIG.SYS file. 4. Enter the following commands to connect to your Novell server: SMCOPEN LSL SMCEZ IPXODI VLM F: LOGIN <user_name> ** NOTE ** Multiple LAN Adapters in a system: If you want to install mutiple LAN adapter in your system, you have to use "SLOT" keyword in NET.CFG to select which adapter to use with your netware client. Configuration Files =================== File Name: NET.CFG Sample of configuration file: ----------------------------------------------------------------------------- Link Driver SMCEZ FRAME Ethernet_802.2 FRAME Ethernet_802.3 FRAME Ethernet_SNAP FRAME Ethernet_II ; No_Early_Rx_Interrupt_Enable ; Certification, please remove the ; first ";" of this line ; FORCE_MEDIA ; Connection_Type = AUTO ; 10M 10MFD 100M 100MFD, default is AUTO TX_THRESHOLD = 4 ; 0..3, 4=Store and forward, default=4 NetWare DOS Requester FIRST NETWORK DRIVE = F NETWARE PROTOCOL = NDS BIND MAX IPG = 0 ; PBURST READ WINDOW SIZE=45 ; PBURST WRITE WINDOW SIZE=45 ----------------------------------------------------------------------------- ** Note ** Its PCI cycle maybe slower on some mechine. At this time, you should enable store and forward function in NET.CFG. TRADEMARKS ========== All Tademarks or Brand names mentioned are properties of their respective companies. == End of File ==Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.