SCO OpenServer V5.0 MDI Driver
Installation
for
SMC 8040 TX 10/100 Fixed-Port PC Card
====================================================
****************************************
* SCO Openserver 5.0 Install Procedure *
****************************************
0. Login as root user. (On maintenance mode)
1. Using "custom" to install the driver
1.1 Preparation
Copy SMC8040.IMG onto SCO OpenServer and rename it to VOL.000.000
# doscp a:/<PATH>/SMC8040.IMG VOL.000.000
* <PATH> is the driver directory
1.2 Execute "custom"
/* A menu selection screen will be popped up */
Using [->] key to move cursor to "Software" menu item then
press [] key to get into pull down menu then move to
"Install New..." then press [ENTER] key
ÉÍÍÍÍÍÍÍÍÍÍ Begin Installation on scoopen ÍÍÍÍÍÍÍÍÍÍ»
º º
º What host (machine) do you want to install from? º
º º
º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
º ³<*> From scoopen ³ º
º ³< > From another host ³ º
º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Continue ] [ Cancel ] [ Help] º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Select From scoopen and use [TAB] key to move cursor to [ Continue ]
then press [ENTER] key and press [] key to get into pull down menu
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Select Media ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Insert media, and select media device. º
º º
º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
º Media Device:³|Floppy Disk Driver 0_____________________|v³ º
º ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º
º º³ Floppy Disk Driver 0 ³º º
º º³*Media Images ³º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Continue ] ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
-> Select "Media Images" and use [TAB] key to move cursor to
[ Continue ] then press [ENTER] key then press [ENTER] key
again
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Enter Image Directory ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Enter the full path to the directory containing media images. º
º º
º Image Directory: |/usr/test__________________________________________| º
º º
º Note: media images must follow the naming convention VOL.000.000, etc. º
º º
º º
º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ OK ] [ Cancel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
-> Input the path name where VOL.000.000 is located as above
path name is /usr/test
ENDIF
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Enter Image Directory ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Installing: SMC 8040 TX 10/100 Fixed-Port PC Card (version 1.0.0) º
º º
º Do you want a FULL or PARTIAL installation? º
º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Full ] [ Partial ] [ Cancel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Using [TAB] key to move cursor to [ Full ] then press [ENTER] key
After the installation progress the following message is displayed
ÉÍÍÍÍÍÍÍÍÍÍÍ Message ÍÍÍÍÍÍÍÍÍÍÍ»
º Installation complete º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º [ OK ] º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Press [Enter] key then you will find out that
SMC 8040 TX 10/100 Fixed-Port PC Card Driver (ver 1.0.0)
is added to the package list
Using [<-] key to move cursor back to "Host" menu item then
press [] key to get into pull down menu then move to "Exit"
then press [ENTER] key
Now that the driver is installed in the system successfully.
2. Using "netconfig" to configure the driver
/* A menu selection screen will be popped up */
At "Hardware" menu item press [] key to get into pull down menu then
move to "Add new LAN adapter" then press [ENTER] key
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add new LAN adapter ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºSelect network adapter to be added: º
ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º
º³* 3Com EtherLink 16/16TP Adapter ^º
º³ . *º
º³ . *º
º³ . *º
º³ . *º
º³ . *º
º³ . *º
º³ . *º
º³ SMC 8040 TX 10/100 Fixed-Port PC Card *º
º³ . ³º
º³ . ³º
º³ . ³º
º³ . ³º
º³ . ³º
º³ . vº
ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Continue ] [ Cancel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Using [] key to move to "SMC 8040 TX 10/100 Fixed-Port PC Card"
, then press [ENTER] key.
After press [ENTER] key the following message is displayed
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Network Driver Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
ºEnter the configuration of SMC 8040 TX 10/100 Fixed-Port PC Card: º
º º
º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
º I/O Address: ³| 300_____________________|v³ º
º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
ºInterrupt Vector: ³| 0_______________________|v³ º
º ÀÉÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
º ÚºÚÄÄÄÄÄÄ¿ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
ºMedia/Cable Type: ³º³ 5 ^º________________|v³ º
º Àº³ 9 ³ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
º º³ 10 ³º º
º * - indicates conº³ 11 *º other hardware º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ³* 12 *ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ OK ] º³ 15 vº [ Cancel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͺÀÄÄÄÄÄÄÙºÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
ÈÍÍÍÍÍÍÍͼ
The above screen let you specify the information of what's your PCMCIA
Ethernet Card Interrupt Vector and Media/Cable Type.
Using [TAB] key to move cursor to "OK" then press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Information ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º--- Please verify adapter is set to the configuration just enteredº
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º [ OK ] º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add Protocol ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºSelect one networking product to be added to º
ºSMC 8040 TX 10/100 Fixed-Port PC Card: º
ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º
º³ HW SMC 8040 TX 10/100 Fixed-Port PC Card: ³º
º³* - SCO IPX/SPX ³º
º³ - SCO TCP/IP ³º
º³ ³º
º³ ³º
ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Add ] [ Cancel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Using [] key to move cursor to "SCO TCP/IP" then press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ SCO TCP/IP Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º º
º º
º º
º Local Host Name: |scoopen_____________| [ Advanced ]º
º IP Address: |192.9.200.1_________| Options... º
º Netmask: |255.255.255.0_______| º
ºBroadcast Address: |192.9.200.255_______| º
º Domain Name: |scoopen.com_________| º
º TCP connections: |256_________________| º
º Pseudo ttys: |32__________________| º
º º
º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º º
º [ OK ] [ Cancel ] [ Help ]º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Input the required information then use [TAB] key to move cursor to "OK"
then press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Message ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º The following products were successfully configured into the system º
º SCO TCP/IP º
º SMC 8040 TX 10/100 Fixed-Port PC Card - I/O Address 300 º
º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ OK ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Press [ENTER] key
At "Hardware" menu item press [] key to get into pull down menu then
move to "Exit" then press [ENTER] key
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º The Unix Kernel must be re-linked before the changesº
º??? made here will have an effect. º
º Do you want to re-link the kernel now? º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º [ YES ] [ NO ] º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
Press [ENTER] key
Do you want this kernel to boot by default (y/n) y
Do you want the kernel environment rebuilt (y/n) y
3. Reboot unix
# shutdown -y -g0
4. Another way to modify I/O Address and connective media is at booting
time shown as below:
4.1 Specify I/O Address
Boot
: unix net.mdi=d65s(0) net.params=(io:0x300,irq:5,phy:auto)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.