1. SMC94x2TX_DRV2.exe Driver
  2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (SMC94x2TX_DRV2.exe)

[Version]
        Signature       = "$Windows NT$"
        Class           = Net
        ClassGUID       = {4D36E972-E325-11CE-BFC1-08002BE10318}
        Provider        = %SMC%

[Strings]
        %SMC%        = "SMC Networks, Inc."

[Identification]
        OptionType      = NetAdapter

[PlatformsSupported]
        PCI

[Options]
        SMC_SMC9462TX
        SMC_SMC9452TX

[FileConstants]
UtilityInf                = "UTILITY.INF"
subroutineinf             = "SUBROUTN.INF"
SoftwareType              = "driver"
Exit_Code                 = 0
NetEventDLL               = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL               = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer              = "SMC Networks, Inc."
ProductMajorVersion       = "1.02"
ProductMinorVersion       = "0905.2001"
ProductVersion            = $(ProductMajorVersion)"."$(ProductMinorVersion)
VendorID                  = 4107  ;; 100B (DEC)

ProductSoftwareName       = "SMC9462TX"
ProductSoftwareTitle      = "SMC9462TX/SMC9452TX Driver"
ProductSoftwareImagePath  = "\SystemRoot\System32\drivers\SMC94X2.SYS"
NetRuleSoftwareType       = "SMC9462TXSys ndisDriver SMC9462TXDriver"
NetRuleSoftwareUse        = $(SoftwareType)
NetRuleSoftwareBindForm   = """SMC9462TXSys"" yes no container"
NetRuleSoftwareClass      = {"SMC9462TXDriver basic"}
NetRuleSoftwareSWBindable = {"SMC9462TXDriver SMC_SMC9462TXAdapter non exclusive 100",+
                             "SMC9462TXDriver SMC_SMC9452TXAdapter non exclusive 100"}

ProductHardwareName                = "SMC9462TX"
;; SMC9462TX
ProductHardwareSMC_SMC9462TXTitle  = "SMC EZ Card 1000"
NetRuleHardwareSMC_SMC9462TXType   = "SMC_SMC9462TX SMC_SMC9462TXAdapter"
NetRuleHardwareSMC_SMC9462TXClass  = {"SMC_SMC9462TXAdapter basic"}
AdapterSMC_SMC9462TXType           = 5   ;; PCI board
HelpSMC_SMC9462TXId                = 30
SMC_SMC9462TXCFID                  = 2232331     ;; 0x0022100B
;; SMC9452TX
ProductHardwareSMC_SMC9452TXTitle = "SMC EZ Card 1000 (SMC9452TX)"
NetRuleHardwareSMC_SMC9452TXType  = "SMC_SMC9452TX SMC_SMC9452TXAdapter"
NetRuleHardwareSMC_SMC9452TXClass = {"SMC_SMC9452TXAdapter basic"}
AdapterSMC_SMC9452TXType          = 5   ;; PCI board
HelpSMC_SMC9452TXId               = 30
SMC_SMC9452TXCFID                 = 2232331     ;; 0x0022100B
NetRuleHardwareBindForm           = " yes yes container"
ProductKeyName                    = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName                      = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

HandleNull                        = ""
NSCCONFIG_HANDLE                  = $(HandleNull)

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

;;
;; Initialize general constants
;;
[InitGeneralConstants]
KeyInfo            = {}
CurrentControlSet  = "SYSTEM\CurrentControlSet"
ServicesBaseName   = $(CurrentControlSet)"\Services"
NetworkCardKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards"

!RegLastError      = NO_ERROR

[DebugOptions]
;;
;; Debugging variables
;;
    !G:DebugOutputControl = 1
    TraceConfig = 1


[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)


    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)


    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL


    EndWait

Begin = +


    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
          Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
               Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     goto ShellCodeError
               endif
               set Error = $($R0)
               set from = end
               set to = end
               goto nonfatalinfo
          else
               set StartLabel = configureadapter
          endif
   else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +


    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Goto ShellCodeError
        Else-Ifstr(i) $($R0) == STATUS_FAILED
            Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
            endif
            set Error = $($R0)
               Goto fatal
        Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
        Endif
        Set SrcDir = $($R1)
    endif
    Goto installproduct

configureadapter = +


   Ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
           Goto fatalregistry
        Endif
    Endif
;Getting service key
   read-syms DebugOptions
   Debug-Output "NSC.INF: In [InstallOption] section"
   Debug-OutPut "NSC.INF: start of the test"

    read-syms InitGeneralConstants
    set FS_KeyThisService = ""
    set FS_KeyComponent   = $(KeyProduct)

    Shell $(UtilityInf), BaseServiceKey

    set FS_KeyServices = $($R1)
    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
       goto F_S_Return
    endif
;
;  Obtain the values for the component key.
;
    EnumRegValue $(FS_KeyComponent) FS_ValueList

    set FS_SvcName = ""
   Debug-OutPut "NSC.INF:  Service Name"$(FS_SvcName)
    ForListDo $(FS_ValueList)
        set FS_ValueName = *($($),1)
        Ifstr(i) $(FS_ValueName) == ServiceName
            set FS_SvcName = *($($),4)
            goto F_S_Break1
        endif
    EndForListDo
F_S_Break1 = +
   Debug-OutPut "NSC.INF:  Service Name found : "$(FS_SvcName)
    Ifstr $(FS_SvcName) == $(KeyNull)
       set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
       goto F_S_Return
    endif

    OpenRegKey $(FS_KeyServices) "" $(FS_SvcName) $(MAXIMUM_ALLOWED) FS_KeyThisService
    Ifstr $(FS_KeyThisService) == $(KeyNull)
       set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
       goto F_S_Return
    endif

F_S_Return = +
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        Ifstr $(FS_KeyThisService) != $(KeyNull)
           CloseRegKey $(FS_KeyThisService)
           Goto fatalregistry
        endif
    endif
   Debug-OutPut "NSC.INF:  Service Name evauated : "$(FS_SvcName)    
; Call the dll with the parameter as service key name overhere
   LoadLibrary "" $(!STF_WINDOWSSYSPATH)\SMCCFG.DLL NSCCONFIG_HANDLE

   LibraryProcedure Result, $(NSCCONFIG_HANDLE), +
            NSCConfigEntryPoint,  $(FS_SvcName) $(!STF_HWND)

   Ifstr(i) $(Result) == "Cancel"
        ; cancel at install means remove any installing we've done
        ; and possibly remove the files
        set CommonStatus = STATUS_USERCANCEL
        Debug-Output "Returned from dll with "$(Result)
        FreeLibrary $(NSCCONFIG_HANDLE)
        CloseRegKey $(FS_KeyThisService)
        goto end
   Endif
   FreeLibrary $(NSCCONFIG_HANDLE)
   CloseRegKey $(FS_KeyThisService)
;*************************************************************************
;  end of FindService
;*************************************************************************
    
    ifstr(i) $(!NTN_InstallMode) == configure
      goto end
    endif
     

installproduct =+


    StartWait
        set-div DeviceID = $($(Option)CFID) 65336
        Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
             goto ShellCodeError
        endif
        ifstr(i) $($R0) == {}
             set Error = $(CANNOT_FIND_ANY_CARD)
             set CommonStatus = USER_CANCEL
             set from = end
             goto nonfatal
        endif
        set AdapterList = $($R0)

    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
           Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
           Ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Goto ShellCodeError
           Else-Ifstr(i) $($R0) == STATUS_FAILED
               Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
               endif
               set Error = $($R0)
               Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
           Endif
           Set SrcDir = $($R1)
        Endif
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
        endif
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif
    endif
    ForListDo $(AdapterList)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)

                Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                    $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"

                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                ifstr $($R0) != "NO_ERROR"
                    set Error = $($R0)
                    goto fatal
                endif
                ifstr(i) $($R1) != "YES"
                    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
                    ifint $($R4) != -1
                        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
                    endif
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    set RegistryErrorIndex = $($R0)
                    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                         EndWait
                         CloseRegKey $($R1)
                         CloseRegKey $($R2)
                         CloseRegKey $($R3)
                         goto fatalregistry
                    endif
                    ; Default Values
                set NetworkIndex = "AutoNegotiate"
                    set IntrHold = "1"                 
                    set JumboIndex = "1) 1514 (Standard)"                        
                    set VLANID = "1"                        
                    set PauseCounterVal = "65535"                        
                    set NcBitIndex = "Enabled"                        
                    set PriQIndex = "Disabled"                        
                    set RxQueueSz = "512"                    
                    set TxQueueSz = "1024"                   
                    set RxCacheLineSizeValue = "0"               
                    set TxCacheLineSizeValue = "0"               
                    set FlowControl = "Enable"          
                    set PsSHi = "4"             
                    set PsSLo = "4"             
                    set PsDHi = "8"             
                    set PsDLo = "4"             
                    set TxFlth = "1"                        
                    set RxDrth = "0"                        
                    set TxDrth = "0"                        
                set NcBitValue = *($(EDValues), ~($(EDList),$(NcBitIndex)))
                set PriQValue = *($(EDValues), ~($(EDList),$(PriQIndex)))
                    set JumboValue = *($(JumboValues), ~($(JumboList),$(JumboIndex)))
                    set FlowControlValue = *($(FlowControlValues), ~($(FlowControlList),$(FlowControl)))
                    set NetworkValue = *($(NetworkValues), ~($(NetworkList),$(NetworkIndex)))
                    Set HardNetCardKey      = $($R1)
                    Set HardNetRuleKey      = $($R2)
                    Set HardParameterKey    = $($R3)
                    set AdapterNumber = $($R4)
                   
                    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                        {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                                        {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                        {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                        {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                        {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
                    Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                         goto ShellCodeError
                    endif
                    set BusTypeNum = 5


                    set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                        {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                        {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)},+
                                        {NetworkMedia,$(NoTitle),$(!REG_VT_SZ),$(NetworkValue)},+
                                        {IntrHold,$(NoTitle),$(!REG_VT_SZ),$(IntrHold)},+
                                        {NcBit,$(NoTitle),$(!REG_VT_SZ),$(NcBitValue)},+
                                        {PriQ,$(NoTitle),$(!REG_VT_SZ),$(PriQValue)},+
                                        {RxQueueSz,$(NoTitle),$(!REG_VT_SZ),$(RxQueueSz)},+
                                        {TxQueueSz,$(NoTitle),$(!REG_VT_SZ),$(TxQueueSz)},+
                                        {RxDMA,$(NoTitle),$(!REG_VT_SZ),$(RxCacheLineSizeValue)},+
                                        {TxDMA,$(NoTitle),$(!REG_VT_SZ),$(TxCacheLineSizeValue)},+
                                        {FlowControl,$(NoTitle),$(!REG_VT_SZ),$(FlowControlValue)},+
                                        {PsSHi,$(NoTitle),$(!REG_VT_SZ),$(PsSHi)},+
                                        {PsSLo,$(NoTitle),$(!REG_VT_SZ),$(PsSLo)},+
                                        {PsDHi,$(NoTitle),$(!REG_VT_SZ),$(PsDHi)},+
                                        {PsDLo,$(NoTitle),$(!REG_VT_SZ),$(PsDLo)},+
                                        {TxFlth,$(NoTitle),$(!REG_VT_SZ),$(TxFlth)},+
                                        {RxDrth,$(NoTitle),$(!REG_VT_SZ),$(RxDrth)},+
                                        {TxDrth,$(NoTitle),$(!REG_VT_SZ),$(TxDrth)},+
                                        {PauseCounterVal,$(NoTitle),$(!REG_VT_SZ),$(PauseCounterVal)},+
                                        {JumboFrame,$(NoTitle),$(!REG_VT_SZ),$(JumboValue)}}

                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    ifstr(i) $(Option) == "MULTIA"
                        set NewValueList = {{ExternalSia,$(NoTitle),$(!REG_VT_DWORD),1},+
                                            {SiaRegister0,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister0)},+
                                            {SiaRegister1,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister1)},+
                                            {SiaRegister2,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister2)}}
                        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                            goto ShellCodeError
                        endif
                    endif
                    set NewValueList = {{NetworkType,$(NoTitle),$(!REG_VT_DWORD),$(NetworkValue)}}
                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
                    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
                    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
                    Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    CloseRegKey $(HardNetCardKey)
                    CloseRegKey $(HardNetRuleKey)
                    set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                                        {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                                        {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                    CloseRegKey $(HardParameterKey)
                endif       
    EndForListDo
    EndWait
    goto successful

updateparameters =+

    set HardParameterKey    = $($R3)


   set NewValueList = {{NetworkMedia,$(NoTitle),$(!REG_VT_SZ),$(NetworkValue)},+
                        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
                        {IntrHold,$(NoTitle),$(!REG_VT_SZ),$(IntrHold)},+
                        {NcBit,$(NoTitle),$(!REG_VT_SZ),$(NcBitValue)},+
                        {PriQ,$(NoTitle),$(!REG_VT_SZ),$(PriQValue)},+
                                {RxQueueSz,$(NoTitle),$(!REG_VT_SZ),$(RxQueueSz)},+
                                {TxQueueSz,$(NoTitle),$(!REG_VT_SZ),$(TxQueueSz)},+
                            {JumboFrame,$(NoTitle),$(!REG_VT_SZ),$(JumboValue)},+
                                {FlowControl,$(NoTitle),$(!REG_VT_SZ),$(FlowControlValue)},+
                                {VLANID,$(NoTitle),$(!REG_VT_SZ),$(VLANID)}}

    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful

bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end

UpgradeSoftware = +
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
           Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error"
               goto ShellCodeError
           endif
           set !UG_Filename = $($R0)
           install "Install-Update"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
               goto fatal
           endif
           SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
           SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
           CloseRegKey $(KeyProduct)
     else
           goto fatalregistry
     endif
     goto end

successful = +
    goto end

abandon = +

    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end

warning = +

    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif

nonfatalinfo = +

    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg

nonfatal = +

    Set Severity = NONFATAL
    goto nonfatalmsg

nonfatalmsg = +

    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif

    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif

fatalregistry = +

    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal

fatal = +

    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed

ShellCodeError = +

    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +

    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end

end = +
    goto term

term = +
    Return $(CommonStatus)

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
        AddSectionFilesToCopyList Files-Utility1 $(SrcDir) $(!STF_WINDOWSSYSPATH)
        CopyFilesInCopyList
    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit

[Source Media Descriptions]
        1 = "SMC9462TX/SMC9452TX WNT Driver", TAGFILE = $(SrcDir)\WINNT\SMC94X2.SYS

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha

[Files-Inf]
        2, OEMSETUP.INF, SIZE=1000, RENAME=$(!UG_Filename)

[Files-SMC_SMC9462TX]
        1, SMC94X2.SYS, SIZE=999

[Files-SMC_SMC9452TX]
        1, SMC94X2.SYS, SIZE=999

[Files-Utility1]
        1, SMCCFG.DLL, SIZE=999

[LanguagesSupported]
        ENG

[OptionsTextENG]
        SMC_SMC9462TX = "SMC EZ Card 1000"
        SMC_SMC9452TX = "SMC EZ Card 1000 (SMC9452TX)"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription              = "SMC9462TX/SMC9452TX Driver"
FunctionSMC_SMC9462TXTitle              = "SMC EZ Card 1000 Setup"
ProductHardwareSMC_SMC9462TXDescription = "SMC EZ Card 1000 Adapter"
FunctionSMC_SMC9452TXTitle              = "SMC EZ Card 1000 (SMC9452TX) Setup"
ProductHardwareSMC_SMC9452TXDescription = "SMC EZ Card 1000 (SMC9452TX) Adapter"

NetworkList  = ^(NetworkChoices, 1)
NetworkValues = ^(NetworkChoices, 2)
JumboList  = ^(JumboChoices, 1)
JumboValues = ^(JumboChoices, 2)
EDList  = ^(ED, 1)
EDValues = ^(ED, 2)
FlowControlList  = ^(FlowControl, 1)
FlowControlValues = ^(FlowControl, 2)

NoList  = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText      = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"

[DialogConstantsENG]
Help        = "Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[NetworkChoices]
    Connect_0 = "AutoNegotiate",        8
    Connect_7 = "Auto 1000",            1
    Connect_6 = "Auto 100",             2
    Connect_5 = "Auto 10",              3
    Connect_4 = "Force 100 Full",       4
    Connect_3 = "Force 100 Half",       5
    Connect_2 = "Force 10 Full",        6
    Connect_1 = "Force 10 Half",        7

[ED]
    Ed_1 = "Enabled",                   1
    Ed_0 = "Disabled",                  0

[JumboChoices]
        Fc_0 = "1) 1514 (Standard)",    1514
        Fc_1 = "2) 4088",               4088
        Fc_2 = "3) 8000 (NSC)",         8000
        Fc_3 = "4) 9014 (Alteon)",      9014
        Fc_4 = "5) 10000",              10000
;       Fc_5 = "6) 16128 (Intel)",      16128

[FlowControl]
        Fc_0 = "Enable",                3
        Fc_1 = "Tx Pause Frames",       1
        Fc_2 = "Rx Pause Frames",       2
        Fc_3 = "Disable",               0
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web3, load: 2.69