1. SMC94x2TX_DRV2.exe Driver
2. SERVER.TXT File Contents

SERVER.TXT Driver File Contents (SMC94x2TX_DRV2.exe)

******************************************************************************
*                             SMC Networks, Inc                              *
*                             SMC EZ Card 1000                               *
*                     NetWare Server Driver Installation                     *
*                                                                            *
*                  Copyright (C) 2000-2001 SMC Networks, Inc.                *
*                             All Rights Reserved.                           *
******************************************************************************

Contents:
                (A) File Description
                (B) Driver Installation for NetWare Server 5.X


(A) File Description :

;;=============================================================================
    Filename            Description
;;=============================================================================

     SERVER.TXT         This file. Presents a summary of the contents
                        for NetWare Server driver installation.

    SMC94X2.LAN         SMC's 32-Bit ODI Server driver for SMC9462TX/SMC9452TX
                        for NetWare Server 5.X

    SMC94X2.LDI         The (SMC94X2.LAN) driver installation information file
                        for NetWare Server 5.X

;;=============================================================================


(B) Driver Installation for NetWare Server 5.X :

     1. Turn off your computer.   Insert the SMC9462TX/SMC9452TX in one of the
        PCI slots that support the PCI "Bus Master" mode in your machine.
     2. Connecting the RJ45 port of SMC9462TX/SMC9452TX to the network using a UTP cable
        (CAT5 cable for 100M/1000Mbps,   CAT3/5 cable for 10Mbps network).
     3. Power on your compute.   Boot it to the NetWare 5.0 console prompt.
     4. At the NetWare console prompt enter the command load nwconfig to start
        the install utility.   The Installation Options dialog box is displayed.
     5. Select the Driver Options menu item and press "ENTER".
        The Driver Options dialog box is displayed.
     6. Select the Configure Network Drivers menu item and press enter.
        The Additional Driver Actions dialog box is displayed.
     7. Insert the SMC9462TX/SMC9452TX Driver Diskette into the 'A:' drive.
     8. Select the Load an additional driver menu item option and press enter.
        The Select a driver dialog box is displayed.
        Press the Ins key to Install an unlisted driver.
        A dialog box indicating the A drive will be scanned for drivers is displayed.
        Press "ENTER" to continue.
     9. Press "ENTER" to select the SMC9462TX/SMC9452TX from the Select a driver to install dialog box.
        A message asking if you want to copy the driver is displayed.
        Select Yes to continue.  The device driver is copied.
    10. A screen with three dialog boxes is displayed.   To change the driver
        configuration,   press "TAB" to the SMC94X2 Parameters dialog box and modify
        setup the driver parameters.   The parameters might need to be changed
        from their default values.   If you are not sure what values are required
        for your network,   contact your network administrator.
    11. Press "TAB" to the SMC94X2 Protocols and select the desired protocols.
    12. Press "TAB" to the Board SMC94X2 Actions dialog box.
        Select the Save Parameters and Load Driver option and press enter to continue.
    13. Perform protocol specific configuration as required.
    14. Select "NO" when asked if you want to load additional drivers.
    15. On the additional driver actions dialog box,   select "RETURN" to
        previous menu and press "ENTER" to continue.
    16. On the Driver Options dialog box,   select "RETURN" to
        previous menu and press "ENTER" to continue.
    17. On the Installation Options dialog box,   select "EXIT" and press "ENTER"
        to return to the NetWare console prompt.

All trademarks and brand names mentioned belong to their respective owners.
===============================================================================

===End of File===