INSTALL.txt Driver File Contents (SMC9432_all.exe)

                   STANDARD MICROSYSTEMS CORPORATION

                       SMC SCO MDI AHS 5.x DRIVER
	For SMC EtherPower(9432BTX) Ethernet and Fast Ethernet LAN Adapter
                  
                        INSTALLATION GUIDE

     This software is licensed by SMC for use by its customers only.
         Copyright (c) 1998 Standard Microsystems Corporation.
                       All rights reserved.


This installation guide:

o  Lists the software requirements needed to use the SMC Ethernet and 
	Fast Ethernet SCO MDI AHS 5.x Driver v2.05 (spwr) with SMC
 	Ethernet and Fast Ethernet (9432) LAN
        adapters.

o  Explains how to use the SCO Custom program to install the 
   SMC EtherPower 9432 AHS 5.x Driver files from the distribution disk.


SOFTWARE REQUIREMENTS

To use the SMC EtherPower Ethernet and Fast Ethernet SCO AHS 5.x UNIX
Driver files, you must have networking products that use the drivers.
You must have the following software and hardware systems:


o SCO OpenServer Enterprise Edition, Release 5.0 installed on a
  486/Pentium with PCI bus pc machine.

o One or more SMC EtherPower Ethernet Adapters can be installed
  in the same machine.

You need at least one of the following items:

o  SCO TCP/IP

o  SCO OSI by Retix

o  SCO IPX/SPX

o  Microsoft LAN Manager for UNIX systems, using either SCO TCP
   NetBIOS or Microsoft NetBEUI

o  Any compatible stack provided by a third-party vendor

SCO Open Desktop/Open Server Release 3.0 includes TCP/IP and
IPX/SPX, and it can be upgraded to include the rest. If you do 
not know which stacks are included with your Open Desktop
system, use "custom(ADM)" to list the products installed on
your system.


INSTALLING the SMC EtherPower SCO AHS 5.x LAN UNIX and DOS DRIVER FILES


	SPECIAL Notes for selecting 10/100 Mbps on SMC9432:

		The default for mode setting for SMC9432 is AutoMediaDetection
		(AMD). By default the Adapter is able to adjust
		its link speed according to the media from which the adapter
		is attached.

		However, you can set it to either BNC, or UTP and LineSpeed of
                10Mbps/100Mbps HalfDuplex or FullDuplex by selecting the
                Advance Option.


		See the CONFIGURING THE SMC 9432 SCO AHS 5.x
		Driver Disk FOR SCO UNIX Section #7 for details

		

In this release the SCO "custom" program can install the driver from a DOS
diskette. Thus, you need to have the binary distribution file "CUSTOM.DST".
This file must be located under A:\SCO\CUSTOM.DST if you are installing from
the drive A or B:\SCO\CUSTOM.DST if you are installing from drive B.

To create "custom.dst" simply do as follows:

In DOS machine type


1. Create a subdirectory on your floppy disk "\SCO"

2. Copy SPWR.MDI into \SCO subdirectory that you have created in step 1.

3. Rename SMPW.MDI to CUSTOM.DST


Note: If you desire additional configuration information about 
      your networking stack, refer to the appendixes on the Release 
      and Installation SCO OpenServer Network Driver.


INSTALLING THE SMC 9432 SCO AHS 5.x Driver

Use the following procedure to install the SMC SCO MDI LAN UNIX 
Driver files.

1. Log in as root.

2. Shut down the system and go to System Maintenance mode by typing
   the following command and pressing Enter: shutdown -y -g0 -i1

3. At the shell prompt, type: custom

4. Press the Enter key. The Custom menu appears with the "Software" 
   option highlighted.

5. Select Software then enter to begin the installation. The Custom program 
   highlights "Install New".

6. Press Enter. Select the host machine that you want to install from
   then press enter.

7. Select Media that you want to install from select Floppy Disk Drive
   then press enter.

8. The Custom program offers you a choice of installing 
   the "Entire Product", "Packages", or "Files." The "Entire Product"
   option is highlighted.
    
9. Press Enter to select the "Entire Product" option. The Custom
   program prompts you to insert Distribution Floppy in an
   available floppy drive.
    
10. Insert the SMC EtherPower SCO AHS MDI Driver Disk in the floppy drive.
   The SMC EtherPower SCO AHS MDI Driver binary distribution disk is
   available in UNIX or DOS(A or B:\SCO\CUSTOM.DST) format.

11. Press Enter. After the driver is installed, the following 
    message appears at the bottom of your screen.

    ----------------------------------------------------------------
    After installing the SMC 9432 SCO MDI Driver Disk,
    please use netconfig to add drivers to your system. Press
    <Enter> to continue.
    ----------------------------------------------------------------

12. Press any key to continue with the installation. The following
    message appears briefly on the screen:

    ----------------------------------------------------------------
    Checking file permissions...
    ----------------------------------------------------------------

    and you return to the main Custom menu. The software list on 
    your screen now includes the

    "SMC EtherPower II (9432BTX) 10/100Mbps Driver (version 2.0.3)".

13. Use the tab key to highlight the "Hardware" option. Press enter then
    select X to exit the custom program.


14. Proceed to the next section to configure the SMC Ethernet driver
    for SCO UNIX and the networking stack.


CONFIGURING THE SMC 9432 SCO AHS 5.x Driver Disk FOR SCO UNIX

The following procedure describes how to use the "netconfig" utility 
to configure the SMC EtherPower driver for SCO UNIX and the networking 
stack.

1. Type: netconfig

2. Press the Enter key. The "Hardware" prompt appears.

3. Presse enter. The sub menu displays the following options:

   Add new LAN Adapter
   Add new WAN Connection
   Remove Network Device
   (Modify Hardware Configuration)
   (Examine Hardware Conficuration)
   Exit

   Use up/down arrow key to highlight the "Add new LAN Adapter"
   then press enter.


4. The program will detect the presence of the SMC EtherPower Adapter
   9432 are in the system. The menu now displays:

	"SMC EtherPower II (9434BTX) - PCI Adapter PCI Bus#0  Device# Funct#"

	if an SMC 9432 is found.


5. Use tab to get to the adapter menu. Then highlight the type of adapter
   that you want to install. Then select continue.


6. You are here to change the hardware setting of the adapter. With PCI
   adapter the SMC Adapter was already selected and set to a conflict free
   configuration. Thus, you do not need to change anything unless you want
   to change the link speed(10/100) for SMC 9432 to operate at 10 or 100

   If you decide to change the link speed then select "An Advanced Option".

   For SMC9432 the following options are available.

   MediaType:
                AutoDetect (Auto Detection of Media Type)
                BNC (Coaxial)
                UTP

   LineSpeed:
                AutoNegotiate (Auto Speed Detection 10/100 Half or FullDuplex)
                LineSpeed10 (10Mbps HalfDuplex) 
                LineSpeed100 (100Mbps HalfDuplex) 
                FullDuplex10 (10Mbps FullDuplex) 
                FullDuplex100 (100Mbps FullDuplex) 

 or

   simply press continue to let hardware figure out.

   NOTES: The default setting for the SMC 9432 is AMD (AutoDetect).


7. Link the desire protocol stack to the SMC EtherPower (9432BTX) driver.


8. Select Hardware->Exit to quit from netconfig, you will be prompted to
   relink the kernel.
   Answer OK to relink the kernel and rebuild the kernel environment.


9. After the kernel is successfully rebuilt, the following message appears:

    ----------------------------------------------------------------
    The kernel has been successfully linked and installed
    To activate it, reboot your system
    Setting up new kernel environment
    ----------------------------------------------------------------

    The system prompt, #, appears after this message.

23. Run "haltsys" to halt your system, then reboot your system.

Note: Make sure you halt and shut down your system in the proper 
      manner. Otherwise, you may corrupt system and user files.


SMC and Standard Microsystems are registered trademarks; and
EtherPower Ethernet and Fast Ethernet,
EtherCard Elite 16 Ultra, EtherCard Elite 16T Ultra, EtherCard Elite
16C Ultra, Elite Series, EliteView, EZStart, SuperDisk, and UltraChip
are trademarks of Standard Microsystems Corporation.  Other products
and company names are registered trademarks or trademarks of their
respective holders.



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.68