*****************************************************************************
* SMC Networks, Inc. *
* SMC EZ Card 10/100 (SMC1244TX V2) *
* NDIS/5 Driver for Windows XP *
* *
* Copyright (C) 2002 SMC Networks, Inc. *
* All Rights Reserved. *
*****************************************************************************
Microsoft had put the AN983/AN983B chip driver in the Windows XP system.
Please plug SMC EZ Card 10/100 (SMC1244TX V2) into PCI slot. After WinXP
starts up, it can recognize this adapter automatically.
Otherwise, you can also use the driver of diskette. The procedures :
1. Open System Properties. To do this, you can :
Right click on the "My Computer" icon on your desktop, then select
"Properties".
2. Select the "Hardware" tab.
3. Click the "Device Manager" button.
4. Double click "Network adapters".
5. Select the "ADMtek AN983 based ethernet adapter"
device and double click to go to its properties.
6. Select the "Driver" tab.
7. Click "Update Driver...".
8. Select "Install from a list or specific location [Advanced]" and click
"Next" in the "Hardware Update Wizard" dialog box.
9. Insert the Adapter Driver Diskette in your floppy drive.
10. Select "Don't search. I will choose the driver to install." and click
"Next".
11. Click "Have Disk" and type "A:\WINXP", then click "Next" button.
12. Select "SMC EZ Card 10/100 (SMC1244TX V2)" then click "Next" button.
Click "Continue Anyway" in the "Hardware Update Wizard" dialog box.
13. When Windows prompts with "SMC EZ Card 10/100 (SMC1244TX V2)" in the
"Hardware Update Wizard" dialog box, click the "Finish" botton.
----
All trademarks or brand names mentioned are properties
of their respective companies.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.