Win95.TXT Driver File Contents (SMC1208_all.zip)

 			     SMC Networks Inc.
                
             SMC EZ Card 10 Ethernet PCI Network Cards
                   Microsoft Windows 95 Driver
                    For Ethernet LAN Cards
            
                       INSTALLATION GUIDE


  This software is licensed by SMC for use by its customers only.
                 Copyright (c) 1997 SMC Networks Inc.
                      All rights reserved.


SUPPORTED NETWORK CARDS
   
SMC'S EZ Card 10 Ethernet PCI Network Cards:
o SMC1208T
o SMC1208BT
o SMC1208BTA


SUPPLIED FILES

    SMC1208N.SYS      NDIS3 MiniPort driver
    SMC1208N.INF      Windows 95 drivers information file for SMC
    WIN95\README.TXT  Readme file

NOTE: For an easy installation we have included the Windows 95
      driver in the root directory of the SMC Driver Diskette.

NOTE: The SETUP.EXE Test utility can be used in a Windows or DOS
      environment to test the card.


  Content:
  --------

    (A) Installing the NDIS3 MiniPort driver for Microsoft Windows 95
    (B) Installing the NDIS3 MiniPort driver for Microsoft Windows 95 (OSR2)
    (C) Configuring the NDIS3 MiniPort driver for Microsoft Windows 95


(A) Installing the NDIS3 MiniPort driver for Microsoft Windows 95
============================================================

    1. Install the SMC EZ Card 10 Ethernet PCI card into one of the PCI 
       slots in your computer.

    2. Turn the power on and then boot from Windows 95.

    3. Windows 95 will display  "PCI Ethernet Controller" 
       in the "New Hardware Found" dialog box.
     
    4. Insert the SMC Driver Diskette in your floppy drive.

    5. Select "Driver from disk provided by hardware manufacturer" from
       the "New Hardware Found" dialog box, then click the "OK" button.

    6. Enter the driver pathname (i.e., A:\ or B:\),
       then click "OK" from the "Install from Disk" dialog box.

    7. When you are asked to select your installed card, choose the
       "SMC EZ Card PCI 10 Adapter," then click "OK" from the "Select
       Device" dialog box.

    8. You may be prompted for Windows 95 installation files. If so, click
       "OK" and then type the path to your Windows 95 CD, or change the 
       path to those files on your hard drive and click "OK."

NOTE: At this point, you may want to add other network components, such as 
      clients, protocol and services (see Optional Procedures below).

    8. Follow the screen instructions to complete the process.

    9. Restart your computer.

NOTE: We have included a Windows 95 installation batch file 
      called W95INST.BAT. This batch file may be used to update
      an older driver.


Optional procedures to add network components and modify card settings:

o  Double-click on the "My Computer," "Control Panel," and "Network" icons.
   The "Network" box appears.
 
o  Click the "Add" button. The "Select Network Component
   Type" box appears.  Add the appropriate Client and protocol. Follow the 
   on-screen directions.
  
o  Select the primary network you will be attaching to
   in the "Primary Network Logon" list box.  

o  For peer-to-peer networks, you may wish to enable "File and Print
   Sharing" in the "Network" box.

o  To modify other network card properties, select the appropriate tab or
   click on the "Properties" button from the "Network" box, and modify 
   properties as desired.


(B) Installing the NDIS3 MiniPort driver for Microsoft Windows 95 (OSR2)
===================================================================

    1. Install the SMC EZ Card 10 Ethernet PCI network card into one of 
       the PCI slots in your computer.

    2. Turn the power on and then boot from Windows 95.

    3. Windows 95 will prompt with "PCI Ethernet Controller" in the
       "New Hardware Found" dialog box.

    4. Insert the SMC EZ Card 10 PCI Driver Diskette in your
       floppy drive (A: or B:).

    5. Click the "Next" button in the "Update Device Driver Wizard"
       dialog box.

    6. Windows 95 will prompt with "SMC EZ Card PCI 10 Adapter"
       in the "Update Device Driver Wizard" dialog box.

    7. Click the "Finish" button in the "Update Device Driver Wizard"
       dialog box.

    8. Enter the full pathname (A:\ or B:\) of the SMC1208N.INF file,
       then click the "OK" button in the "Copying Files..." dialog box.

    9. Following the screen prompt, insert the "Windows 95 CD-ROM"
       and click the "OK" button in the "Insert Disk" dialog box. 
       Otherwise, enter the full pathname of the "Windows 95 CD-ROM"
       installation files in the "Copying Files..." dialog box, and
       then click the "OK" button.

   10. Windows 95 will copy the driver SMC1208N.SYS from the A:\WIN95 to
       the C:\WINDOWS\SYSTEM directory, the driver SMC1208.DOS from the
       A:\NDIS\DOS to the C:\WINDOWS directory, and the SMC1208N.INF file
       from the A:\ to the C:\WINDOWS\INF directory.

   11. Remove the SMC EZ Card 10 PCI Driver Diskette from your
       floppy drive.

   12. Restart your computer so the network function can initialize.


(C) Configuring the NDIS3 MiniPort driver for Microsoft Windows 95
====================================================================

    1. Click the "My Computer" icon in the Main Program Group.

    2. Click the "Control Panel" icon in the My Computer window.

    3. Click the "Network" icon in the Control Panel window.

    4. Click the "Add" icon in the Network window.

    5. Select the "Adapter" item and then click the "Add" icon
       in the Select Network Component Type window.

    6. Click the "Have Disk" icon in the Select Network Adapter window.

    7. Enter the full pathname (A:\ or B:\) of the SMC1208N.INF file,
       then click the "OK" button in the "Install From Disk" dialog box.

    8. Select "SMC EZ Card PCI 10 Adapter," then click the "OK" button 
       in the "Select Network Adapters" dialog box.

    9. Click the "OK" button in the Network window.

   10. When prompted for any SMC1208 driver file, enter the driver pathname
       ( i.e. A:\ or B:\).  

NOTE:  You may be prompted for Windows 95 installation files. If so, 
       click "OK" and then type the path to your Windows 95 CD, or change
       the path to those files on your hard drive and click "OK."

   11. After all the files have been copied, network installation is
       complete.
       
   12. You will be asked to restart the computer.  Just press "YES"
       to reboot the PC.

 
 Optional procedures to add network components and modify card settings:

o  Double-click on the "My Computer," "Control Panel", and "Network" icons.
   The "Network" box appears.
 
o  Click the "Add" button. The "Select Network Component
   Type" box appears.  Add the appropriate Client and protocol. Follow  
   the on-screen directions.
  
o  Select the primary network you will be attaching to
   in the "Primary Network Logon" list box.  

o  For peer-to-peer networks, you may wish to enable "File and Print
   Sharing" in the "Network" box.

o  To modify other network card properties, select the appropriate tab or
   click on the "Properties" button in the "Network" box, and modify 
   properties as desired.
      
This commercial computer software and documentation is provided with
RESTRICTED RIGHTS.  Use, duplication, or disclosure by the
Government is subject to restrictions set forth in subparagraphs
(c) (1) (ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data -- General
clause at FAR 52.227-14, as applicable.  The manufacturer /
subcontractor is SMC Networks Inc., 6 Hughs, Irvine CA.

SMC is a registered trademark, and EZ Card 10 is a
trademark of SMC Networks Inc.  Other product and company
names are trademarks or registered trademarks of their respective holders.

Trademarks:
Microsoft Windows 95 is a trademark of Microsoft Corporation.
Microsoft Windows 95 (OSR2) is a trademark of Microsoft Corporation.

======  The End  ======

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 0.50