SMC Networks Inc. SMC EZ Card 10 Ethernet PCI Network Cards DOS NDIS2 Driver For Ethernet LAN Cards INSTALLATION GUIDE This software is licensed by SMC for use by its customers only. Copyright (c) 1997 SMC Networks Inc. All rights reserved. SUPPORTED NETWORK CARDS SMC's EZ Card 10 Ethernet PCI Network Cards: o SMC1208T o SMC1208BT o SMC1208BTA The drivers you need are in the directories MSLANMAN.DOS and NDIS. The NDIS 2 drivers contained in the following directories are used with 3Com 3+Open, Microsoft OS/2 LAN Manager OEM distribution release 1.x or 2.x, and other compatible OEM versions of LAN Manager. The drivers named SMC1208 conform to the Network Driver Interface Specification (NDIS) defined by Microsoft/3Com. Included in the MSLANMAN.DOS and NDIS subdirectories are the following files: \MSLANMAN.DOS\DRIVERS\ETHERNET\SMC\ SMC1208.DOS The DOS NDIS MAC driver PROTOCOL.INI A sample section of a PROTOCOL.INI file \MSLANMAN.DOS\DRIVERS\NIF\ SMC1208.NIF Network Information File \NDIS\DOS SMC1208.DOS The DOS NDIS MAC driver SMC1208D.NIF Network Information File for LAN Server (DOS) PROTOCOL.INI A sample section of a PROTOCOL.INI file OEMSETUP.INF Network Information File for Windows for Workgroups v3.1 \NDIS README.TXT This readme file =============================== VERIFYING HARDWARE INSTALLATION =============================== Under DOS, run the SETUP utility on the SMC Driver Diskette to verify the card installation and configuration. Follow the instructions for testing and verifying the configuration in your product manual. ==================== DRIVER INSTALLATION ==================== 1. Create a directory on the computer; for example, on Drive C: mkdir \ndis Copy the NDIS 2.01 driver from the SMC Driver Diskette to that directory. For example: copy a:\ndis\dos\smc1208.dos c:\ndis 2. Edit the PROTOCOL.INI file with a text editor. The PROTOCOL.INI file must include a section describing the LAN card and another section describing each of the network products that are operating. Binding statements must be created to identify the SMC NDIS 2.01 driver to the networking products' protocol modules. A sample excerpt from the PROTOCOL.INI file is: ; SMC LAN Adapter [smc1208] drivername = smc1208$ 3. Reboot the computer and execute NETBIND.EXE. This file is included with the networking product software. NETBIND.EXE must be run each time the computer is booted; therefore, SMC recommends that NETBIND.EXE be added to the AUTOEXEC.BAT file. This commercial computer software and documentation is provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the Government is subject to restrictions set forth in subparagraphs (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the Commercial Computer Software -- Restricted Rights clause at FAR 52.227-19, or Alternate III of the Rights in Data -- General clause at FAR 52.227-14, as applicable. The manufacturer / subcontractor is SMC Networks Inc., 6 Hughs, Irvine CA. SMC is a registered trademark, and EZ Card 10 is a trademark of SMC Networks Inc. Other product and company names are trademarks or registered trademarks of their respective holders. <End of File>Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.