1. 618-Win2000-XP.zip Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (618-Win2000-XP.zip)

Windows 2000/XP
Driver Installation for model 618/619


1. Copy SMARTAD.DLL to the Windows\System directory
2. Copy SXDRV98.SYS to Windows\System32\drivers
2. Copy WINDRVR.SYS to Windows\System32\drivers
3. Execute this command line (exclude quotes): WDREG.EXE INSTALL
4. Shut down computer
4. Install 618 into the backplane
5. Apply system power and reboot
6  After you have installed a PCI, Windows may, during bootup, detect the board as a new PCI
Communication Device and ask you if you wish to install it. If this happens, do not allow Windows
to choose the driver for the Smart A/D board. If you permit Windows to automatically install the driver
for your new board, it will not work properly and Windows may corrupt the configuration of other PNP
devices in your system. Instead, click on Have Disk to manually select a driver, and specify SX618.INF 
as the driver to be used. Select model 618 or 619 from the list.
7.  Reboot the system.


If you already tried to install model 618/619 for Windows 2000 and Windows did not find appropriate 
driver for model 618, you can do following:

1. Make sure SmartAD.dll, SXDRV98.SYS and WINDRVR.SYS are istalled and registered by running WDREG.EXE INSTALL.
2. Locate "PCI Communication Device" with question mark in: Control Panel/System/Hardware/Device Manager
3. Click on "Driver Details" and "Update driver". Do not allow Windows to choose the driver. 
Click on Have Disk to manually select a driver, and specify SX618.INF as the driver to be used.
Select model 618 or 619 from the list.
7.  Reboot the system.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.