ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex ENET32-VL Ethernet Network Adapter º
º (C) Copyright PDS, 1995. All Rights Reserved. º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
1) INTRODUCTION
===============
The configuration utility VLSET.EXE allows you to view the current
settings of the ENET32-VL adapter and to change the settings. These
settings include the I/O address, interrupt channel, Boot ROM address,
cable type and burst mode.
2) CONFIGURE THE ADAPTER
========================
The valid values for the settings are:
1. Base I/O Address : 220, 240, 280, 2A0, 300, 320, 340, 380
2. IRQ Number : 3, 5, 10, 15
3. Boot ROM Address : C800, D000, D800, Disable
4. Cable Type : AUI, BNC
Note that TP is not one of the values because
drivers for the ENET32-VL adapter will auto-detect
for TP if one is plugged in.
5. Burst Mode : OFF, ON
Any of these settings can be changed by selecting its number, and then its
value. To make the changes effective, press R to reprogram the EEPROM on
the adapter. The default settings of I/O address 300, IRQ 5, Boot ROM address
C800, cable type BNC and burst mode OFF can be restored by pressing L, and
then R to reprogram the EEPROM.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.