ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex ENET32-VL Ethernet Network Adapter º
º (C) Copyright PDS, 1995. All Rights Reserved. º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Using EN32VL.LAN driver in NetWare SFT III 3.11
------------------------------------------------
Installing on NetWare SFT III 3.11
1. Rename the old xxx.LAN, xxxTSM.NLM, and MSMxxx.NLM files.
2. Copy the new xxx.LAN, xxxTSM.NLM, and MSMxxx.NLM files into the
directory of each server where files loaded from IOSTART.NCF are
loaded. These files should also be put into the SYSTEM directory of
the SYS: volume for easy server maintenance.
Do not use LSLENH.NLM, PATCHMAN.NLM, MONITOR.NLM, XLOAD.EXE, or
LDR001.PTF with NetWare SFT III 3.11. These files are for NetWare
3.11 only.
Do not use the included MONITOR.NLM with NetWare SFT III 3.11. Use
the shipping MONITOR.NLM with NetWare SFT III 3.11. LAN statistics
are not part of MONITOR.NLM in SFT III 3.11.
3. Copy PM311IO.NLM and LSLENH3.NLM into the directory of each server
where files loaded from IOSTART.NCF are loaded.
4. Add "load lslenh3" to the IOSTART.NCF of each server before the load
statement for the LAN drivers. This will automatically load
PM311IO.NLM.
5. Load the corresponding driver for your adapter (<filename>.LAN) in
the IOSTART.NCF of each server after the load statement for
LSLENH3.NLM. This will automatically load MSM/MSM31X and
xxxTSM.NLM.
Note: Loading MSM.NLM will generate warnings that cause MSM31X.NLM
to be automatically loaded. This is normal. The warning messages
generated will be as follows:
MESSAGE
Loader cannot find public symbol:
The message will be followed by the public symbol name.
To eliminate the warning message on NetWare SFT III 3.11, you can
remove MSM.NLM and rename MSM31X.NLM to MSM.NLM.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.