1. 7004VBR_FWv102.zip Driver
2. 7004VBRv2_FWv102.txt File Contents

7004VBRv2_FWv102.txt Driver File Contents (7004VBR_FWv102.zip)

*************************************************************************
*			    SMC Networks, INC 				*
*		    	 Barricade Broadband Router			*
*		    		SMC7004VBR 				*
*			751.0113 US / 751.114 Canada			*
*			  FIRMWARE version 1.02 			*
*				11/05/2003				*
*************************************************************************

This document contains three sections:

A) The upgrade procedure
B) The release history for SMC7004VWBR (751.0113/751.114)

=========================================================================
Section A: Upgrade Procedure
=========================================================================

1.  Turn on the router and plug it into your network adapter using port 1 
    through 4 on the router.

2.  Connect to the Web user interface by typing the Barricade's IP Address 
    (ex: 192.168.2.1)in your browser, then type "smcadmin" and click the 
    login button (if you have not already set a password - otherwise 
    enter in the correct password)

3.  Click on the "Tools" link, then click the "Update Firmware" option. 
    The "Update Firmware" screen will appear.

4.  Click the "Browse" button and point it to the location of the firmware 
    file (7004VBRv2_FW102.bin). 

5.  Next click "Start" button and follow the prompts. You will notice the 
    lights on the Barricade will react in a certain sequence.  Wait patiently 
    while the Barricade performs the following reboot sequence:

	a.  The Power light will flash rapidly.
	b.  The Link lights will come on solid. 
	c.  The Link lights will all turn off.
	d.  The Link lights that have a cable connected to them will turn 
            on and blink rapidly.
	e.  The Link lights will return to normal. 

6.  Your 7004VWBR has now been successfully upgraded. 

Note: It is recommended that once you upgrade your router with this f/w 
      you reset the unit to factory defaults.

=========================================================================
Section B: Firmware History
=========================================================================

Runtime code:

v1.00: (Shipping version)

v1.02:	11/05/2003
	.Add "NO-IP.com" DDNS function
	.PPTP and PPPoE MTU setting range: 576-1460
	.Fix the URL/Website blocking issue.
	 There are now two sections you can configure it from.
	 You can add it as a rule in the "parental control" page or 
	 turn it on for everyone in the "Website Blocking" page. 
	 Both of these pages can be accessed under the "Firewall" menu.