;******************************************************************************
;* COPYRIGHT (C) 2002 TEXAS INSTRUMENTS INCORPORATED.
;* ALL RIGHTS RESERVED. ONLY USE WITH TEXAS INSTRUMENTS SILICON.
;******************************************************************************
;*
;* FILE: UmpUsbXP.INF
;* SUBSYSTEM: VCP Devices
;*
;* ABSTRACT: Driver Installation file for
;* TI's VCP Driver for TUSB3410/TUSB5052, USB module
;*
;* REVISION HISTORY:
;*
;* STR # INIT DATE SHORT TITLE
;* [.....] PJG 08/20/02 Initial revision of win2000/XP....................
;* [.....] PJG 10/21/02 Fix Parity and GetCommStatus on reads............
;* [.....] DWB 10/30/02 Fix Timeout timing/Win2K UNINSTALL hang..........
;* [.....] DWB 17 JUL 03 Create EVM eeprom pid to differentiate GPIO/UART.
;* [.....] BK 24 NOV 03 Engr Bld 1.2.10.84 for 2k/XP enum, DUN, etc......
;* [.....] BK 22 DEC 03 Engr Bld 1.2.10.85 (*SPECIAL*) floating MSR w/a .
;* DSR=DCD=RI=0 whatever FW messages say...........
;* [.....] BK 23 DEC 03 Engr Bld 1.2.10.86 (SetMSRLines tags in INF/registry
;* control floating MSR w/a in driver.
;* [.....] BK 05 JAN 04 Engr Bld 1.2.10.87 Fix COM port assignment
;* [.....] BK 14 JAN 04 Engr Bld 1.2.10.88 Fix DUN surprise disconnect
;* [xxxxx] JCR 11 FEB 04 Engr Bld 1.2.10.90 Fix race condition on surprise removal
;* [xxxxx] JCR 19 FEB 04 Engr Bld 1.2.10.91 Fix the wait for threads......
;* [xxxxx] BK 12 JUN 04 Engr Bld 1.2.10.95 INF can set custom port display names
;* [xxxxx] BK 07 JUL 04 1.2.10.95 Add PID_505A for EEPROM boot header
;* [xxxxx] nnn dd mmm yy .................................................
;*
;******************************************************************************
;*
[Version]
signature="$WINDOWS NT$"
Class = MultiportSerial
ClassGuid = {50906cb8-ba12-11d1-bf5d-0000f805f530}
Provider=%TIInc%
CatalogFile=UMPUSBXP.cat
;* LayoutFile=LAYOUT.INF
DriverVer = 11/01/2004,1.2.11.03
[Manufacturer]
%TI.Mfg%=TI.Section
[ControlFlags]
ExcludeFromSelect = *
[SourceDisksNames]
1 = %DiskName%
[SourceDisksFiles]
umpf3410.i51=1
umpf5052.i51=1
umpusbxp.sys=1
[DestinationDirs]
DefaultDestDir=11 ; LDID_SYS
UMPUSB.CopyFiles.NT = 10, system32\drivers
TI5052.CopyFiles.NT = 10, system32\drivers
;TI5152.CopyFiles.NT = 10, system32\drivers
TI3410.CopyFiles.NT = 10, system32\drivers
;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
; 5052
;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
[TI5052.Boot.NT]
CopyFiles=UMPUSB.CopyFiles.NT,TI5052.CopyFiles.NT
AddReg=TI5052.AddReg.NT
[TI5052.Dev.NT]
CopyFiles=UMPUSB.CopyFiles.NT,TI5052.CopyFiles.NT
AddReg=TI5052.AddReg.NT
[TI5052.Boot.NT.HW]
AddReg=TI5252.Generic.Addreg.NT.HW, TI5052.AddReg.NT.HW
[TI5052.Dev.NT.HW]
AddReg=TI5252.Generic.Addreg.NT.HW, TI5052.Dev.AddReg.NT.HW
[TI5052.AddReg.NT]
;HKR,,EnumPropPages32,,"usbui.dll,USBHubPropPageProvider"
[TI5252.Generic.Addreg.NT.HW]
HKR,,NumComPorts,%REG_DWORD%,2
HKR,,NumLptPorts,%REG_DWORD%,0
[TI5052.AddReg.NT.HW]
HKR,,ImageFile,,"\SystemRoot\System32\drivers\umpf5052.i51"
HKR,,TIDeviceType,,"TILDR5052"
[TI5052.Dev.AddReg.NT.HW]
HKR,,ImageFile,,"\SystemRoot\System32\drivers\umpf5052.i51"
HKR,,TIDeviceType,,"TIUSB5052"
; Vendor: In these HWID strings, replace TI VID (0451) and PID (5052) with your own
; VID/PID. Or, replace the HWID in quotes with some other name unique to your company
; and product. This key is stored in the registry and is also used by Windows Update.
;HKR,,Port1DeviceHWID,,"VID_0451_5052_com" ; set to these for common port names ; <------ TUSB5052 applications
;HKR,,Port2DeviceHWID,,"VID_0451_5052_com" ; <------ TUSB5052 applications
HKR,,Port1DeviceHWID,,"VID_0451_5052_port1" ; set to these for different port names ; <------ TUSB5052 applications
HKR,,Port2DeviceHWID,,"VID_0451_5052_port2" ; <------ TUSB5052 applications
;
; ****
[TI5052.CopyFiles.NT]
umpf5052.i51
;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
; 3410 -- Unitary driver. Bootloader and driver are same instance.
;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
[TI3410.Uni.NT]
CopyFiles=UMPUSB.CopyFiles.NT,TI3410.CopyFiles.NT
DelFiles=UMPUSB.DelFiles
AddReg=TI3410.AddReg.NT
[TI3410.Uni.NT.HW]
AddReg=TI3410.AddReg.NT.HW
[TI3410.Dev.NT]
CopyFiles=UMPUSB.CopyFiles.NT,TI3410.CopyFiles.NT
DelFiles=UMPUSB.DelFiles
AddReg=TI3410.AddReg.NT
[TI3410.Dev.NT.HW]
AddReg=TI3410.AddReg.NT.HW
[TI3410.AddReg.NT]
;HKR,,EnumPropPages32,,"usbui.dll,USBHubPropPageProvider"
[TI3410.AddReg.NT.HW]
HKR,,ImageFile,,"\SystemRoot\System32\drivers\umpf3410.i51"
HKR,,SetMSRLinesZero,%REG_BINARY%,0x00 ; 0x80=DCD 0x40=RI 0x20=DSR 0x10=CTS
HKR,,SetMSRLinesOne, %REG_BINARY%,0x00 ; 0x80=DCD 0x40=RI 0x20=DSR 0x10=CTS
HKR,,NumComPorts,%REG_DWORD%,1
HKR,,NumLptPorts,%REG_DWORD%,0
HKR,,TIDeviceType,,"TIUSB3410"
; Release 1.2.10.96: This line sets the Virtual COM Port HW ID
; Vendor: In this HWID string, replace TI VID (0451) and PID (3410) with your
; own VID/PID; or, use some other string unique to your company and product. This
; key is stored in the registry and is also used by Windows Update.
HKR,,Port1DeviceHWID,,"VID_0451_3410_com" ; <------------ TUSB3410 applications
; ****
; This defines the name shown by the Found New HW wizard for the COM port child device:
HKR,,ComPortChildDeviceText,,"Texas Instruments UMP Serial Port"
[TI3410.CopyFiles.NT]
umpf3410.i51
[TI3410.Uni.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[TI3410.Dev.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[TI3410.Uni.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[TI3410.Dev.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[TI5052.Boot.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[TI5052.Dev.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[StandardUMPUSB.AddService]
DisplayName = %StandardUMPUSB.SvcDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\umpusbxp.sys
LoadOrderGroup = Base
; =================== Sections ==================================
; NOTE: All 5152 chipset IDs are now aliased to 5052.
[TI.Section]
; Vendor: In the next line, replace "0451" with your VID,
; and replace the last occurrence of "3410" with your PID
%PID_3410.DeviceDesc%=TI3410.Uni,USB\VID_0451&PID_3410 ; <------------ TUSB3410 applications
%PID_341A.DeviceDesc%=TI3410.Uni,USB\VID_0451&PID_341A
%PID_5052.DeviceDesc%=TI5052.Boot,USB\VID_0451&PID_5052
%PID_5052.DeviceDesc%=TI5052.Boot,USB\VID_0451&PID_505A
%PID_505F.DeviceDesc%=TI5052.Dev,USB\VID_0451&PID_505F
%PID_5052.DeviceDesc%=TI5052.Boot,USB\VID_0451&PID_5152
%PID_505F.DeviceDesc%=TI5052.Dev,USB\VID_0451&PID_515F
; =================== Global ==================================
[UMPUSB.CopyFiles.NT]
umpusbxp.sys,,,0x00000004
[UMPUSB.DelFiles]
; =================== Strings ==================================
[Strings]
; Vendor: for each string below, customize for your application
TIInc="Texas Instruments, Inc" ; <------------ TUSB3410/TUSB5052 applications
USBClassName="TI UMP Devices" ; <------------ TUSB3410/TUSB5052 applications
StandardUMPUSB.SvcDesc="Texas Instruments VCP Device Driver" ; <------------ TUSB3410/TUSB5052 applications
TI.Mfg="Texas Instruments" ; <------------ TUSB3410/TUSB5052 applications
DiskName="TI VCP Installation Disk" ; <------------ TUSB3410/TUSB5052 applications
; Vendor: In the next line, replace 3410 with your PID, and change
; the string
PID_3410.DeviceDesc="TUSB3410 Device" ; <------------ TUSB3410 applications
PID_341A.DeviceDesc="TUSB3410UART EVM"
; Vendor: In the next lines, change the strings
PID_5052.DeviceDesc="TUSB5052 Loader" ; <------------ TUSB5052 applications
PID_505F.DeviceDesc="TUSB5052"
REG_BINARY =0x00000001
REG_DWORD =0x00010001
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.