1. tp770xnt.exe Driver
2. DISKHELP.TXT File Contents

DISKHELP.TXT Driver File Contents (tp770xnt.exe)

Please visit the following URL for latest updates on this document:
   http://www.pc.ibm.com/support/?page=dshy-3tepf6


CrossBrand - Building Diskettes from the Web

Many of the files located on IBM's BBS FTP server ending with the EXE
extension are in a self-extracting, diskette building format.  This means
that after downloading and executing the file, it will format and extract
itself out onto a floppy disk.  Even though it requests a blank formatted
diskette, the creation process will erase and format the disk for you.
The most important thing is to ensure the diskettes are good and have no
bad sectors.
  Below are instructions on how to create the diskette:

I. Download the file to a temporary directory on your hard drive.
II. Insert a diskette into the floppy drive.

NOTE: It does not have to be a blank, formatted diskette; however, if the
diskette is old or has any bad sectors, the disk creation process will
fail.

III. Building the diskette:

If you are using Windows 95:
a.) Open Windows Explorer, and navigate to the directory where you saved
    the file.
b.) Double click on the file to read the licensing information.  If you
    agree to the terms, press Y, then press the enter key to accept.  It will
    proceed to format and expand the image onto the floppy disk.

If you are using Windows NT:
a.) Open Windows Explorer, and navigate to the directory where you saved
    the file.
b.) Double click on the file to read the licensing information.  If you
    agree to the terms, press Y, then press the enter key to accept.  It will
    proceed to format and expand the image on the floppy disk.
    NOTE I:   If you receive an OS/2 error message do the following:
a.) Click on Start, then Run...
b.) Type the word "  Command  " in the open box and press OK
c.) Change to the directory that the file is located in and execute the
    file by typing out its name and pressing enter.
d.) Read the licensing information.  If you agree to the terms, press Y,
    then press the enter key to accept.  It will proceed to format and expand
    the image on the floppy disk.
    Limitations:
    Under Windows NT you cannot extract any files downloaded from the IBM site
    (e.g. TPP95RLD.EXE) from a subdirectory which has spaces, e.g. file name
    TPP95RLD.EXE located in "C:\TEMPorary  DIRectory\".  When executing the
    file, the following error message appears:  "Usage : OS2 /P <full path> /C
    <original CommandLine>"
    This error occurs regardless of whether the volume is NTFS or Fat-16.
    Extraction DOES work in any subdirectory, regardless of length, as long as
    it does not have a space in it.

If you are using OS/2:
a.) Open OS/2 System folder.
b.) Open the Drives folder and select the drive that you saved the file
    on.
c.) Navigate to the folder or directory that the file is in.
d.) Double click on the file to read the licensing information.  If you
    agree to the terms, press Y, then press the enter key to accept.  It will
    proceed to format and expand the image on the floppy disk.

If you are using DOS and Windows 3.1x:
a.) Open a DOS Prompt.
b.) Switch to the drive or directory where the file is located and execute
    the file by typing out its name and pressing enter.
c.) Read the licensing information.  If you agree to the terms, press Y,
    then press the enter key to accept.  It will proceed to format and expand
    the image on the floppy disk.