1. Siemens_C2110_ADSL_Modem_USB_Driver.zip Driver
2. autoConfig.ini File Contents

autoConfig.ini Driver File Contents (Siemens_C2110_ADSL_Modem_USB_Driver.zip)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; AUTOCONFIG.INI
;;
;; Copyright 2002 GlobespanVirata, Inc.
;;
;; Contains custimization parameters for the GlobespanVirata 
;; AutoConfiguration feature.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[General]

; Timeout in seconds for modem to enter data mode
DataModeTimeout=120

; The method of autodetection that will be performed
; 1 - TR037 then Port Scanning
; 2 - Port Scanning then TR037
; 3 - TR037 only
; 4 - Port Scanning only
Method = 1

; Location of the wan and lan drivers for the installer to use after the
; driver type has been determined.  These locations are under the USB/PCI
; directory.
WanDriverLocation = WAN Driver
LanDriverLocation = LAN Driver

; Location of the driver that will perform autodetection.
AutoCfgDriverLocation = WAN Driver

; Timeout in seconds for TR37 detection
Tr37Timeout = 60

; The Vpi/Vci that TR37 uses for ILMI communication 
Tr37IlmiVpi = 0
Tr37IlmiVci = 16

; Other obscure values
Tr37GetSet = 0
Tr37KeepAlive = 0
Tr37MaxTries = 0

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[KnownPorts]

; Number of ports to search for.  The format of each port is explained below.
NumPorts = 3

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ; Each port should be the following format:
;; ; PortN = vpi,vci,protocol,encapsulation,timeout,numTries
;; ; N is the port number, from 0 to NumPorts.
;; Port0 = 0,35,1f,07,30,2
;;
;; ; The protocol choices can be a combination of the following hex values:
;; ; 01 - RFC2364 PPPoATM
;; ; 02 - RFC2684 IPoATM Bridged
;; ; 04 - RFC2684 Routed
;; ; 08 - RFC2516 PPPoE
;; ; 10 - RFC1577 Classical IPoATM
;; Protocol = 1f
;;
;; ; The encapsulation choices can be a combination of the following hex values:
;; ; 01 - NULL Encapsulation
;; ; 02 - VC-Mux Encapsulation
;; ; 04 - LLC Encapsulation
;; Encapsulation = 07
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

Port0 = 0,35,1f,07,60,1
Port1 = 0,88,1f,07,60,1
Port2 = 0,36,1f,07,60,1

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.