1. onyxfw_pc_controlpanel.zip Driver
2. bco_1394_MackieOnyx.inf File Contents

bco_1394_MackieOnyx.inf Driver File Contents (onyxfw_pc_controlpanel.zip)

;
; BCO_1394 Setup Information file
; Copyright (c) 2003-2004 Thesycon GmbH / BridgeCo AG
;

;******************************************************************************
; Version Section
;------------------------------------------------------------------------------
[Version]
Signature="$Windows NT$"
Class=61883
ClassGUID={7ebefbc0-3200-11d2-b4c2-00a0C9697d07}
Provider=%S_Provider%
DriverVer=04/26/2004,1.12.1.0
CatalogFile=bco_1394.cat

;******************************************************************************
; Manufacturer
;------------------------------------------------------------------------------
[Manufacturer]
%S_Provider%=_Devices

;******************************************************************************
; Device section
;------------------------------------------------------------------------------
[_Devices]
%S_DeviceDesc%=_Install, 1394\Mackie&Onyx_Firewire


;******************************************************************************
; Install Sections
;------------------------------------------------------------------------------
[_Install.NTx86]
CopyFiles=_CopyFiles_sys

[_Install.NTx86.Services]
AddService = %S_DriverName%, 0x00000002, _NT_AddService, _NT_EventLog

[_Install.NTx86.HW]
AddReg=_AddReg_ChildDev, _AddReg_DevSpecCfg


[_NT_AddService]
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %10%\System32\Drivers\%S_DriverName%.sys
AddReg=_AddReg_DevInterfaces, _AddReg_ConfigDB

[_NT_EventLog]
AddReg=_NT_EventLog_AddReg

[_NT_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\%S_DriverName%.sys"
HKR,,TypesSupported,  %REG_DWORD%, 7


;******************************************************************************
; child device identifier, identifies the WDM audio driver instance
;------------------------------------------------------------------------------
[_AddReg_ChildDev]

; Setting this flag to null disables the WDM audio device.
;HKR,  , ChildEnable, %REG_DWORD%, 0

; Use this to override the default enumerator name. This is optional.
;HKR, , ChildDeviceEnumerator,   %REG_SZ%,  "BCO1394_ENUM"

; Use this to override the default device description. This is optional.
;HKR, , ChildDeviceDescription,  %REG_SZ%,  "BridgeCo WDM Audio Device"

;;Note: The HardwareID for the WDM audio device is built as follows: <Enumerator\DeviceId>


;******************************************************************************
; device interface identifiers
;------------------------------------------------------------------------------
[_AddReg_DevInterfaces]

;; specify a vendor-specific GUID which is used by the vendor's applications to open the driver
;; Use guidgen.exe to generate a new GUID, copy-paste it into the following line.
;HKR, , VendorSpecificInterfaceGuid,  %REG_SZ%,  "{????????-????-????-????-????????????}"

;; Activate the following line to disable the default device interface exported by the driver
;; The default interface is identified by BCO_IID.
;HKR, , RegisterDefaultDeviceInterface,  %REG_DWORD%,  0


;******************************************************************************
; Device specific static settings
;------------------------------------------------------------------------------
[_AddReg_DevSpecCfg]
;; Mackie Onyx input WDM fader configuration 
;; not implemented


;; Mackie Onyx output stereo WDM fader configuration
;; not implemented


;; Use this to override the default sound device names. This is optional.
;; Note: $D will be replaced by the WDM sound device number (0...4) 
;;       which is configurable by BridgeCo Control Panel.
;;       $I will be replaced by the sound device instance per device (port number)
;;
;; Refer to 
;; HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\1394\<Vendor&Device>\<SerialNumber>\Device Parameters
;; to find out the internal sound device names that can be labeled here.
;; An internal name contains direction, type and stream position, e.g. "In&Line2C&00", "Out&Line2C&00".

;; Mackie Onyx input channel name WDM configuration
HKR, "In&Line2C&00",      SoundDeviceName,  %REG_SZ%,  "Mackie Onyx #$D Stereo In $I"
HKR, "In&Line2C&01",      SoundDeviceName,  %REG_SZ%,  "Mackie Onyx #$D Stereo In $I"
HKR, "In&Line2C&02",      SoundDeviceName,  %REG_SZ%,  "Mackie Onyx #$D Stereo In $I"
HKR, "In&Line2C&03",      SoundDeviceName,  %REG_SZ%,  "Mackie Onyx #$D Stereo In $I"
HKR, "In&Line2C&04",      SoundDeviceName,  %REG_SZ%,  "Mackie Onyx #$D Stereo In $I"
HKR, "In&Line2C&05",      SoundDeviceName,  %REG_SZ%,  "Mackie Onyx #$D Stereo In $I"
HKR, "In&Line2C&06",      SoundDeviceName,  %REG_SZ%,  "Mackie Onyx #$D Stereo In $I"
HKR, "In&Line2C&07",      SoundDeviceName,  %REG_SZ%,  "Mackie Onyx #$D Stereo In $I"
HKR, "In&Line2C&08",      SoundDeviceName,  %REG_SZ%,  "Mackie Onyx #$D Stereo MainIn $I"


;; Mackie Onyx output channel name WDM configuration
HKR, "Out&Line2C&00",     SoundDeviceName,  %REG_SZ%,  "Mackie Onyx #$D Stereo MainOut $I"




;******************************************************************************
; Static settings in ConfigDB
;------------------------------------------------------------------------------
[_AddReg_ConfigDB]

;; default size of isochronous stream buffers, in microseconds
HKR, "ConfigDB\Settings", "IsoStreamBufferDepth[us]",   %REG_DWORD%, 2000

;; default size of ASIO buffers, in microseconds
HKR, "ConfigDB\Settings", "AsioBufferDepth[us]",        %REG_DWORD%, 10000

;; default size of WDM/KS buffers, in microseconds
HKR, "ConfigDB\Settings", "KsBufferDepth[us]",          %REG_DWORD%, 10000

;; default synch mode, 0=UserDefinesSampleRate, 1=ClockMasterDefinesSampleRate
HKR, "ConfigDB\Settings", "SynchMode",                  %REG_DWORD%, 0

;; default sampling rate, supported rates are: 44100, 48000, 88200, 96000
HKR, "ConfigDB\Settings", "SampleRate[Hz]",             %REG_DWORD%, 44100


;******************************************************************************
; Copy file sections
;------------------------------------------------------------------------------
[_CopyFiles_sys]
bco_1394.sys


;******************************************************************************
; Destination Directories
;------------------------------------------------------------------------------
[DestinationDirs]
DefaultDestDir  = 11    ; SYSTEM directory
_CopyFiles_sys = 10,System32\Drivers


;******************************************************************************
; Disk Layout
;------------------------------------------------------------------------------
[SourceDisksNames]
1=%S_DiskName%,,

[SourceDisksFiles]
bco_1394.sys=1


;******************************************************************************
; Text Strings
;------------------------------------------------------------------------------
[Strings]
;
; Non-Localizable Strings, DO NOT MODIFY!
;
REG_SZ         = 0x00000000
REG_MULTI_SZ   = 0x00010000
REG_EXPAND_SZ  = 0x00020000
REG_BINARY     = 0x00000001
REG_DWORD      = 0x00010001


;
; Localizable Strings, modify as required
;
S_Provider="BridgeCo"
S_DeviceDesc="Onyx Firewire"
S_DiskName="BridgeCo 1394 Audio Driver Disk"

; File name of driver executable (without extension).
; If the name is modified, the [_CopyFiles_sys] and [SourceDisksFiles]
; sections has to be modified as well!
S_DriverName="bco_1394"