Readme.txt Driver File Contents (VGA_XP64_14.25_.zip)

****************************************************************
*
*
*  Production Version Releases
* 
* 
*  Microsoft Windows* XP64 
*
*                                                      
*  Driver Revision: PV 14.25
*  Package: 29366
*
*  Graphics: 6.14.10.4704
*  HDMI Audio: 5.10.0.1014                                                    
*
*
*  October 9, 2006
*
*  NOTE:  This document refers to systems containing the 
*         following Intel chipsets: 
*
*     Intel(R) 915G Express Chipset
*     Intel(R) 915GV Express Chipset
*     Intel(R) 910GL Express Chipset
*     Intel(R) 945G Express Chipset               
*     Intel(R) 945GM Express Chipset                       
*     Intel(R) 945GML Express Chipset          
*     Intel(R) G965 Express Chipset 
*     Intel(R) Q965 Express Chipset
*     Intel(R) Q963 Express Chipset
*     Intel(R) 946GZ Express Chipset                              
*	
*  Installation Information
*
*  This document makes references to products developed by
*  Intel. There are some restrictions on how these products
*  may be used, and what information may be disclosed to
*  others. Please read the Disclaimer section and contact
*  your Intel field representative if you would like more
*  information.
*
***********************************************************
***********************************************************
*  DISCLAIMER: Intel is making no claims of usability,
*  efficacy or warranty.  The INTEL SOFTWARE LICENSE
*  AGREEMENT contained herein completely defines the 
*  license and use of this software.
*
*  This document contains information on products in the 
*  design phase of development. The information here is 
*  subject to change without notice. Do not finalize a 
*  design with this information.
***********************************************************
***********************************************************

***********************************************************
*  CONTENTS OF THIS DOCUMENT
***********************************************************
*

This document contains the following sections:

1.  System Requirements
3.  Installing the Software
4.  Verifying Installation of the Software
5.  Identifying the Software Version Number
6.  Uninstalling the Software
7.  Installation Switches Available


***********************************************************
* 1.  SYSTEM REQUIREMENTS
***********************************************************

1.  The system must contain one of the following Intel
    Chipsets:

     Intel(R) 915G Express Chipset
     Intel(R) 915GV Express Chipset
     Intel(R) 910GL Express Chipset
     Intel(R) 945G Express Chipset               
     Intel(R) 945GM Express Chipset                       
     Intel(R) 945GML Express Chipset          
     Intel(R) G965 Express Chipset 
     Intel(R) Q965 Express Chipset
     Intel(R) Q963 Express Chipset
     Intel(R) 946GZ Express Chipset 
    
    
    
2.  The software should be installed on systems with at
    least 256 MB of system memory.

3.  There should be sufficient hard disk space in the 
    <TEMP> directory on the system in order to install 
    this software.

    The drivers included with this distribution package are
    designed to function with all release Microsoft Windows* XP.

Please check with your system provider to determine the
operating system and Intel Chipset used in your system.


***********************************************************
* 3.  INSTALLING THE SOFTWARE
***********************************************************

General Installation Notes:

1.  The operating system must be installed prior to the
    installation of the driver.

2.  This installation procedure is specific only to the 
    version of driver and installation file included in 
    this release.
3.  This procedure assumes that all of the software
    associated with this release is located in the same
    directory.


AUTOMATED INSTALL USING SETUP.EXE
---------------------------------
1.  Obtain KB888111.exe (for XP64 obtain XB901105, the Microsoft UAA High 
    Definition Audio Package version 1.0a.

2.  Run KB888111.exe or KB901105.exe and follow the installation 
    wizard.  This will install the Microsoft UAA Bus  
    Driver for High Definition Audio under System 
    Devices in the Device Manager.

3. To Install the Intel(R) Express Chipset drivers, 
      you will download ZIP file and unzip it using a 
       utility such as WinZip* or PKZip*. 

4. Click the 'Start' button in the task bar, click 'Run' 
   and then select 'Setup.exe' from the hard drive 
   directory where the driver files are stored.  The 
   Install dialog will appear.

5. click 'Next' to continue.  

6. Read License Agreement and click Yes to proceed.
 
7. When the 'Setup COMPLETE' message appears click 'Finish'
   to restart your computer.



MANUAL "HAVE-DISK" INSTALLATION INSTRUCTIONS
--------------------------------------------

To install from a Web download, you will download either a 
ZIP file or an EXE file from the Web.

a. If it is an EXE file, double-click the file you 
   downloaded and specify a location into which the  driver
   files will be extracted. Click "Unzip" and the files 
   will extract. Click "OK" on the next window, then click 
   "Close". 

b. If it is a ZIP file, you must unzip it using a utility 
   such as WinZip* or PKZip*. 

Microsoft Windows* 2000 Installation Instructions for 
Intel(R) Express Chipset Graphics Driver
-------------------------------------------------

1.  Right click on "My Computer" icon and then click on 
    "properties".

2.  Click on "Hardware" Tab and select "device manager". 
    (NOTE: IF UPDATING DRIVER GO TO STEP 3B)

3a. Double click "Video Controller (VGA Compatible)". 
    (Go To STEP 4)

3b. Double click "Display adapters". Double click on the 
    graphics controller shown.

4.  Click on "driver" tab and select "Update Driver".

5.  Click on the "Next" button.

6.  Select the following option: "Display a list of the 
    known drivers for this device...". Click on the "Next"
    button. (NOTE: IF UPDATING DRIVER GO TO STEP 8)

7.  Select "Display adapters". Click on the "Next" button.

8.  Click on the "Have Disk..." button and then the 
    "Browse" button.

9.  Enter the directory where you unzipped the file you 
    downloaded, and then enter the "Graphics" subdirectory.
    Highlight the "igxp32.INF" file. Click on the "Open" button. 

10. Click on the "OK" button. A window listing all of the
    available display types should open. Select the display
    adapter that your system contains and then click on the
    "Next" button. 

11. Click on the "Next" button. The operating system will 
    install the driver. Click on the "Finish" button when 
    done.

12. Click on the "Close" button.  If a dialog asking to reboot is displayed, click on the "Yes" button to automatically reboot.  Otherwise, manually restart the system.
     The driver should now be loaded. 
    

To determine if the driver has been loaded correctly, refer
to the Verifying Installation section below.

Microsoft Windows* XP Installation Instructions for 
Intel(R) Express Chipset Graphics Driver
-----------------------------------------------

1.  Click "Start" then right click on "My Computer" icon 
    and then click on properties.

2.  Click on "Hardware" Tab and select "device manager". 
    (NOTE: IF UPDATING DRIVER GO TO STEP 3B)

3a. Double click "Video Controller (VGA Compatible)". 
    (Go To STEP 4)

3b. Select "Display adapters" then Double click on the 
    graphics controller shown.  

4.  Click on "driver" tab and select "Update Driver".

5.  Select the following option: "Install from a list or
    specific location (Advanced)". Click on the "Next" 
    button.

6.  Select the following option: "Don't search.  I will 
    choose the driver to install".  Click on the "Next" 
    button. (NOTE: IF UPDATING DRIVER GO TO STEP 8)

7.  Select "Display adapters". Click on the "Next" button.

8.  Click on the "Have Disk..." button and then the 
    "Browse" button.

9.  Enter the directory where you unzipped the file you 
    downloaded, and then enter the "Graphics" subdirectory.
    Next enter the "xp32" subdirectory. Highlight the 
    "igxp32.INF" file. Click on the "Open" button. 

10. Click on the "OK" button. A window listing all of the
    available display types should open. Select the display
    adapter that your system contains and then click on the
    "Next" button. 

11. Click on the "Next" button. The operating system will 
    install the driver. Click on the "Finish" button when
    done.

12. Click on the "Close" button.  If a dialog asking to reboot is displayed, click on the "Yes" button to automatically reboot.  Otherwise, manually restart the system.
     The driver should now be loaded.

To determine if the driver has been loaded correctly, refer
to the Verifying Installation section below.



Microsoft Windows* XP Installation Instructions for
Intel(R) HD Audio HDMI Function Driver (IntcHmdi.sys)
----------------------------------------------------

1.  Obtain KB888111.exe, the Microsoft UAA High 
    Definition Audio Package version 1.0a. For Windows* 
    XP 64 obtain the KB901105.exe 

2.  Run KB888111.exe or KB901105 (XP 64)and follow the 
    installation wizard.This will install the Microsoft UAA Bus  
    Driver for High Definition Audio under System 
    Devices in the Device Manager.

3.  A Found New Hardware Wizard will popup for the 
    HDMI Audio Codec.  Note that you may see two new 
    hardware wizards as one may popup for the HD 
    Audio codec on the motherboard.

4.  If you are updating the driver, just right-click 
    on the HDMI function driver in the device manager 
    and in the 'properties' page select "Update Driver".

5.  Do not connect to Windows Update to search for 
    software and click "Next".

6. Select "Install from a list or specific location" 
    and click "Next".

7. Select "Don't Search. I will choose the driver 
    to install" and click "Next".

8. If asked for the device type, Select "Sound Video 
    and Game controllers" and click "Next".

9. Click "Have Disk" and navigate to the directory 
    with intchdmi.inf and intchdmi.sys.

 10. Select intchdmi.inf and click "Open", click "Ok".

 11. Select "Intel HD Audio HDMI Audio Function Driver 
    )" and click "next". 

 12. Click "continue anyway" on the warning regarding 
    Windows Logo.
   

To determine if the driver has been loaded correctly, 
refer to the Verifying Installation section below.


************************************************************
* 4.  VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************
1.  Double Click on the "My Computer" icon, then double 
    click on the "Control Panel" icon, and then double click 
    on the "System" icon.

2.  For Graphics:
    Click on "Hardware" Tab and select "device manager". 
    Click on the "Display Adapters" icon. The Intel 
    Graphics Driver should be listed.  If not, the driver
    is not installed correctly. To check the version of 
    the driver, refer to the section below.

    For HDMI Audio:
    Click on "Hardware" Tab and select "device manager".  
    Click on the "System Devices". The Intel HD Audio HDMI 
    Audio Function Driver should  be listed and not yellow banged. 
     If not, the driver is  not installed correctly. To check the version of the 
    driver, refer to the section below.

************************************************************
* 5.  IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************

For Graphics:
1.  Right Click on the "My Computer" icon, and then click 
    on "Properties". 
    
2.  Click on the "Hardware" tab and select 
    "Device Manager".

3.  Select "Display adapters" then double click on the 
    graphia controller shown.

4.  Click on "Driver" tab. The graphics driver version 
    should be listed on driver version.

For HDMI Audio:
1.  Double Click on "Intel HD Audio HDMI Audio Function 
    Driver".

2.  Select the "Driver" tab and then click on the "Driver 
    Details" button.

3.  The function driver (intchdmi.sys) version should be 
    listed on this screen.

************************************************************
* 6.  UNINSTALLING THE SOFTWARE
************************************************************

NOTE: This procedure assumes the above installation process
was successful. This uninstallation procedure is specific
only to the version of the driver and installation files
included in this package.

For Graphics:
1.  Click on the "My Computer" icon, then click on the
    "Control Panel" icon, and then click on the "Add/Remove
    Programs" icon.

2.  Select Intel(R) Graphics Media Accelerator Driver 
    Software

3.  Click the "Remove" button to uninstall the driver. 


For HDMI Audio:
1.  Click "Start" then right click on the "My Computer" icon and 
    then click on properties.

2.  Click on "Hardware" Tab and select "device manager". 

3.  Double click on "System Devices".

3.  Right click on "Intel HD Audio HDMI Audio Function Driver 
    -" and select properties

4.  Click on the "uninstall" button to uninstall the driver. 


*Other names and brands may be claimed as the property of others.

***********************************************************
* 7.  INSTALLATION SWITCHES AVAILABLE
***********************************************************

The switches in the SETUP.EXE file will have the following
syntax. Switches are not case sensitive and may be
specified in any order (except for the -s switch). Switches
must be separated by spaces.

SETUP [-b] [-overwrite][-nolic] 
[-res {x_pixels x y_pixels x bits x vert_refresh}]
[-l{lang_value}] [-s] [-f2<path\logfile>]

GFX-INSTALL CUSTOM SWITCHES

-b  Forces a system reboot after the installation 
completes. In non-silent mode, the absence of this switch
will prompt the user to reboot. In silent mode, the absence
of this switch forces the Setup.exe to complete without 
rebooting (the user must manually reboot to conclude the 
installation process).

-overwrite  Installs the graphics driver regardless of the
version of previously installed driver.  In non-silent 
mode, the absence of this switch will prompt the user to 
confirm overwrite of a newer Intel Graphics driver. In 
silent mode, the absence of this switch means that the 
installation will abort any attempts to regress the 
revision of the Intel(R) Extreme Graphics driver.

-nolic	Suppresses the display of the license agreement
screen. In non-silent mode, the absence of this switch will
only prompt the user to view and accept the license
agreement. The functionality of this switch is auto-
matically included during silent installations.

-res [x_pixels]x[y_pixels]x[bits]x[vert_refresh].
Sets the four default display parameters: pixels per line, 
pixels per column, bits per pixel and vertical refresh 
rate. For example: If you want 1024 pixels per line, 
768 pixels per column, 16 bits per pixel, and a vertical 
refresh rate of 75Hz, you would input the following at 
the command line "-res 1024x768x16x75".

-l{lang_value}  The switch specifies the language used for 
the Gfx-Install user interface. The absence of this switch
will cause the installation to utilize the language of the 
OS as its default. Hexadecimal values for the supported 
languages can be found in the localized language 
abbreviations section of this readme.

-s  Run in silent mode. The absence of this switch causes
the install to be performed in verbose mode.

-f2<path\logfile>  Specifies an alternate location and name
of the log file created by a silent install. By default,
the log file is created and stored during a silent
install in the windows temp directory as IntelGFX.log
(<WINDIR>\Temp\IntelGFX.log).


***********************************************************
*INTEL SOFTWARE LICENSE AGREEMENT (OEM / IHV / ISV Distribution & Single User)
***********************************************************


IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. 
Do not use or load this software and any associated materials (collectively, the “Software”) until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.

Please Also Note:
	If you are an Original Equipment Manufacturer (OEM), Independent Hardware Vendor (IHV), or Independent Software Vendor (ISV), this complete LICENSE AGREEMENT applies;
	If you are an End-User, then only Exhibit A, the INTEL SOFTWARE LICENSE AGREEMENT, applies.

For OEMs, IHVs, and ISVs:

LICENSE. This Software is licensed for use only in conjunction with Intel component products.  Use of the Software in conjunction with non-Intel component products is not licensed hereunder. Subject to the terms of this Agreement, Intel grants to You a nonexclusive, nontransferable, worldwide, fully paid-up license under Intel’s copyrights to:
	a) use, modify and copy Software internally for Your own development and maintenance purposes; and
	b) modify, copy and distribute Software, including derivative works of the Software, to Your end-users, but only under a license agreement with terms at least as restrictive as those contained in Intel's Final, Single User License Agreement, attached as Exhibit A; and
	c) modify, copy and distribute the end-user documentation which may accompany the Software, but only in association with the Software.
If You are not the final manufacturer or vendor of a computer system or software program incorporating the Software, then You may transfer a copy of the Software, including derivative works of the Software (and related end-user documentation) to Your recipient for use in accordance with the terms of this Agreement, provided such recipient agrees to be fully bound by the terms hereof.  You shall not otherwise assign, sublicense, lease, or in any other way transfer or disclose Software to any third party. You shall not reverse- compile, disassemble or otherwise reverse-engineer the Software.

Except as expressly stated in this Agreement, no license or right is granted to You directly or by implication, inducement, estoppel or otherwise. 	Intel shall have the right to inspect or have an independent auditor inspect Your relevant records to verify Your compliance with the terms and conditions of this Agreement.

CONFIDENTIALITY.   If You wish to have a third party consultant or subcontractor ("Contractor") perform work on Your behalf which involves access to or use of Software, You shall obtain a written confidentiality agreement from the Contractor which contains terms and obligations with respect to access to or use of Software no less restrictive than those set forth in this Agreement and excluding any distribution rights, and use for any other purpose.
Otherwise, You shall not disclose the terms or existence of this Agreement or use Intel's name in any publications, advertisements, or other announcements without Intel's prior written consent.  You do not have any rights to use any Intel trademarks or logos.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time and without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY.  If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE.  Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROF¬ITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR IN¬ABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITA¬TION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITA¬TION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.
 
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledg¬ment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.

 
EXHIBIT “A” 
INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. 
Do not use or load this software and any associated materials (collectively, the “Software”) until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSE. You may copy the Software onto a single computer for your personal, noncommercial use, and you may make one back-up copy of the Software, subject to these conditions: 
1.	This Software is licensed for use only in conjunction with Intel component products.  Use of the Software in conjunction with non-Intel component products is not licensed hereunder. 
2.	You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software.
3.	You may not reverse engineer, decompile, or disassemble the Software. 
4.	You may not sublicense or permit simultaneous use of the Software by more than one user.
5.	The Software may contain the software or other property of third party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed “license.txt” file or other text or file. 

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY.  If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE.  Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROF¬ITS, BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR IN¬ABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITA¬TION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITA¬TION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.
 
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledg¬ment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.

 
SLA/OEM/IHV/RBK/ April 23, 2004
***********************************************************
* DISCLAIMER
***********************************************************
Intel is making no claims of usability, efficacy or 
warranty.The INTEL SOFTWARE LICENSE AGREEMENT contained 
herein completely defines the license and use of this 
software.
***********************************************************
Information in this document is provided in connection with
Intel products. Except as expressly stated in the INTEL
SOFTWARE LICENSE AGREEMENT contained herein, no license,
express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document.
Except as provided in Intel's Terms and Conditions of Sale
for such products, Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a 
particular purpose, merchantability or infringement of any
patent, copyright or other intellectual property right. 
Intel products are not intended for use in medical, 
lifesaving, or life-sustaining applications.

***********************************************************
* Intel Corporation disclaims all warranties and 
* liabilities for the use of this document, the software 
* and the information contained herein, and assumes no
* responsibility for any errors which may appear in this
* document or the software, nor does Intel make a 
* commitment to update the information or software 
* contained herein. Intel reserves the right to make 
* changes to this document or software at any time, without
* notice.
***********************************************************

* Other names and brands may be claimed as the property of 
others.

Copyright (c) Intel Corporation, 1998-2006
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" >
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.32