ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Compex ParaPort2 Ethernet Adapters º º (C) Copyright PDS, 1996. All Rights Reserved. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼ 1) INTRODUCTION =============== This directory contains the following files for installing the ParaPort2 Ethernet adapter on a DOS LAN Manager workstation. The file layout in the current directory is shown as below: MSLANMAN.DOS | |--- LMDOS.TXT This file |___ DRIVERS | |___ ETHERNET | | | |___ PLINK2 | |___ PLINK2.DOS | |___ PROTOCOL.INI | |___ NIF | |_____ PLINK2.NIF 2) NDIS Driver Installation for MS-DOS LAN Manager v2.0 workstation =================================================================== 1. LAN Manager should already be installed in your computer. In the Lan Manager directory, run SETUP.EXE 2. Select <Actions> from the top menu 3. Select <Import network drivers> to load the driver. Insert the driver diskette into a drive and enter correct source drive letter. SETUP will then create the appropriate directory and transfer the driver from the diskette. After this step, the driver is loaded. If you want to change the existing driver, then you should go through the following steps: 4. Select <View/Modify> from the top menu. 5. Select <Network Drivers>. The existing network driver configuration and all network adapters and protocols supported are shown. 6. Remove the existing configuration by choosing <Remove>. 7. Select "Compex Paraport2 Ethernet Network Adapters" in the <Network Adapter Card> box and choose the apporpriate protocol in the <Protocol> box. 8. Select <Add Driver> to add a hardware driver and <Add Protocol> to add a protocol driver to the <Network Configuration> box. 9. Select <Done> to exit the main menu. Select <Save> from the <Action> box to update the changes. 3) NDIS Driver Installation for MS-DOS LAN Manager v2.1/2.2 workstation ======================================================================= 1. LAN Manager should already be installed in your computer. In the Lan Manager directory, run SETUP.EXE 2. Select <Network Driver> from the <Configuration> menu. 3. In the configuration window, choose <Add New Config>. 4. Select <Other Driver>. 5. Insert driver diskette in the floppy drive A: and press Enter. 6. Select "Compex ParaPort2 Ethernet Network Adapters". The driver will be copied into the Lan Manager. 7. In the Network Protocol window, you may use Netbeui protocol. 8. Save the Lan Manager configuration. Exit from Lan Manager setup. Reboot the workstation to make the changes effective.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.