DOS IFlash32 BIOS Update Utility - Release Notes
Copyright (c) 2005 Intel Corporation
All Rights Reserved
June 02, 2006.
The DOS IFlash32 BIOS Update Utility is a DOS based application program used for
updating the system BIOS.
RELEASE NOTES FOR THE IFLASH32 VERSION 1.6.2
A. CHANGES SINCE THE PREVIOUS VERSION
Following feature has been added.
1. NOne.
B. DEPENDENCIES
1. Requires support for Intel Platform Innovation Framework for
EFI Flash Update Interface Specification, Revision 0.38.
2. Executes in MS-DOS 6.x and ROM-DOS 6.2 shell.
3. Binary input files must conform to Intel Platform Innovation
Framework for EFI Capsule Specification, Revision 0.9.
4. Requires BIOS Version 0019 or later.
5. If IFlash32 is run from write-protected media, the following command should be
entered at the DOS prompt before running the utility to ensure proper operation:
c:\> set CAUSEWAY=NOVM
6.Rolling Bios feature is not supported on S3000AH platform.
C. SUPPORTED PLATFORMS
1.S3000AH
D. HOW TO USE THIS UTILITY
1. Boot to the ROM-DOS shell.
2. Copy IFlash32.exe and BIOS binary file (also referred as capsule file) to a
diskette or HD.
3. Command line Interface
IFlash32 [File Name] [Options]
a. To view the command-line help page:
IFlash32 /h
b. To update the System BIOS:
IFlash32 [File Name] /u
c. To display file information:
IFlash32 [File Name] /i
d. To display the system BIOS ID:
IFlash32 /i
e. To update the system BIOS in non-interactive mode:
IFlash32 [FileName] /u /ni
f. To automatically reboot system after a system BIOS update:
IFlash32 [FileName] /u /r
4. Reboot system after the update is completed.
E. KNOWN ISSUES
None.
F. UNSUPPORTED FEATURES
1. This version of the utility does not support split binary files.
2. This version of the utility does not support capsule files that do not
contain Flash Area Table information.
* Third-party brands and names are the property of their respective owners.
(end)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.