ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ ³
³ Novell Advanced NetWare Versions 2.x and ³
³ Novell NetWare 386 Driver Installation ³
³ ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
The driver installation procedures of IPX driver for Novell NetWare 2.x
and 386 are discussed in the following chapters.
Chapter 1 - Driver installation for Novell Advanced NetWare
Version 2.1x
Chapter 2 - Driver installation for Novell NetWare V2.20
Chapter 3 - Driver installation for Novell NetWare 386 V3.11
Chapter 4 - Function Enhancement
NOTE :
1. For your convenience, the Hardware Driver Disk is not copy
protected. Before you start with the installation process,
make a backup copy of this diskette. Use the backup as your
working diskette. Keep the original and use it only to make
backup copies.
CHAPTER 1
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Novell Advanced NetWare 2.1x Driver Installation ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
1. Things You Need
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Before you start with the installation process make sure you have
the following :
a. Hardware Driver Disk
b. Novell Advanced NetWare Disks :
AUXGEN, NETGEN and SHGEN_1 Disks
c. One formatted blank diskette
Volume name LAN_DRV_003
2. How To Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
All object files and configuration files are now set to diskette
, LAN_DRV_003. Please insert this new environment when generate
driver.
2.1 OS Generation
ÄÄÄÄÄÄÄÄÄÄÄÄÄ
a. Make a backup of your NetWare diskettes. Please refer
to your Novell Advanced NetWare Installation Manuals
for detailed description of the backup process. If
you have already done this operation, skip this step.
b. Insert the Hardware Driver Disk into drive A and check
the contents of subdirectory \NETWARE\IPX. It should
contain the following files :
AEP0100.OBJ ÄÄ¿
BEP0100.OBJ ÄÄÅÄÄ Server Driver
CEP0100.OBJ ÄÄ´
DEP0100.OBJ ÄÄÙ
OS.LAN ÄÄÄÄÄ Server Configuration File
EP0100.LAN ÄÄÄÄÄ Workstation Configuration File
EP0100SH.OBJ ÄÄÄÄÄ Shell Driver
c. Use the 'FORMAT' command to format a blank diskette
and give the volume name LAN_DRV_003.
d. Copy the following driver files from the Hardware Driver
Disk into the LAN_DRV_003 diskette :
AEP0100.OBJ
BEP0100.OBJ
CEP0100.OBJ
DEP0100.OBJ
OS.LAN
e. Insert the NetWare diskette NETGEN into drive A and
execute the NETGEN.EXE program. Follow the screen
instructions to change diskettes, specify new path to
LAN_DRV_003 and select ' NE-Series Adapter Driver
v1.xx (yymmdd) ' as the target network adapter in the
choice list. The NETGEN program can generate the
NetWare file server execution program NET$OS.EXE
automatically.
2.2 SHELL Generation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
a. Make the backup NetWare diskettes and check the contents
of the Hardware Driver Disk as described in steps a and
b of Section 2.2 (SHELL Generation). If you have already
done these operations, skip this step.
b. Copy the EP0100.LAN file from the Hardware Driver Disk
into NetWare diskette labeled LAN_DRV_003.
c. Copy the EP0100SH.OBJ file from the Hardware Driver Disk
into the LAN_DRV_003 diskette.
d. Insert the NetWare diskette LAN_DRV_003 into drive
A and execute the SHGEN.EXE program. Follow the screen
instructions to change diskettes, specify new path to
LAN_DRV_003 and select 'NE_Series v3.xx (yymmdd) ' as
the target network adapter in the choice list. The SHGEN
program will generate the NetWare workstation execution
program IPX.COM automatically.
3. Prepared IPX.COM
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
To simplify the installing procedure of shell driver,a ready
IPX.COM is included. It can be used for all settings of
NE2000 compatible mode. Re-generate IPX.COM or use DCONFIG
to re-configure IPX.COM if this value has to be changed.
CHAPTER 2
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Novell NetWare Version 2.20 Driver Installation ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
1. How To Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
All object files and configuration files are now set to diskette
, LAN_DRV_003. Please insert this new environment when generate
driver.
1.1 OS Generation
a. Make a backup of your NetWare diskettes. Please refer
to your Novell NetWare V2.20 Installation Manuals
for detailed description of the backup process. If
you have already done this operation, skip this step.
b. Insert the Hardware Driver Disk into drive A and check
the contents of subdirectory \NETWARE\IPX. It should
contain the following files :
AEP0100.OBJ ÄÄ¿
BEP0100.OBJ ÄÄÅÄÄ Server Driver
CEP0100.OBJ ÄÄ´
DEP0100.OBJ ÄÄÙ
OS.LAN ÄÄÄÄÄ Server Configuration File
EP0100.LAN ÄÄÄÄÄ Workstation Configuration File
EP0100SH.OBJ ÄÄÄÄÄ Shell Driver
c. Use the 'FORMAT' command to format a blank diskette
and give the volume name LAN_DRV_003.
d. Copy the following driver files from the Hardware Driver
Disk into the LAN_DRV_003 diskette :
AEP0100.OBJ
BEP0100.OBJ
CEP0100.OBJ
DEP0100.OBJ
OS.LAN
e. Insert the NetWare diskette SYSTEM-1 into drive A and
execute the INSTALL program. Follow the screen
instructions to change diskettes, specify new path to
LAN_DRV_003 and select 'NE-Series v1.xx (yymmdd)' as
the target network adapter in the choice list. The
INSTALL program will generate the NetWare file server
execution program NET$OS.EXE into OSEXE diskette
automatically.
1.2 SHELL Generation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
a. Copy the EP0100.LAN and EP0100SH.OBJ file from the Hardware
Driver Disk into NetWare diskette labeled LAN_DRV_003.
b. Insert the NetWare diskette WSGEN into drive A: and execute
the WSGEN.EXE program. Follow the screen instructions to
change diskettes, specify new path to LAN_DRV_003 and
select 'NE-Series v3.xx (yymmdd) ' as the target network
adapter in the choice list. The WSGEN program will generate
the NetWare workstation execution program IPX.COM
automatically.
2. Prepared IPX.COM
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
To simplify the installing procedure of shell driver,a ready
IPX.COM is included. It can be used for all settings of
NE2000 compatible mode. Re-generate IPX.COM or use DCONFIG
to re-configure IPX.COM if this value has to be changed.
CHAPTER 3
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Novell NetWare 386 Version 3.11 Driver Installation ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
1. How To Install Shell Driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
a. Make sure that the original NetWare diskettes have been
duplicated for backup purpose. If you have already duplicated
the diskettes, skip this step. Please refer to Novell NetWare
Installation Manuals for detailed description of the backup
process.
b. Insert the Hardware Driver Disk into drive A:, and check the
contents of the subdirectory \NETWARE\IPX. There should be 2
NetWare 3.11 driver programs in the subdirectory:
EP0100.LAN ----- Workstation Configuration File
EP0100SH.OBJ ----- Workstation Driver
c. Copy the EP0100.LAN and EP0100SH.OBJ file into the NetWare
diskette labeled LAN_DRV_003.
d. Insert the NetWare diskette WSGEN into drive A:. Execute the
WSGEN.EXE program and specify new path to LAN_DRV_003. From the
menu shown on your screen, choose the target network adapter by
selecting, 'NE-Series v3.xx (yymmdd) ' from the choice list.
This will allow WSGEN program to generate the the NetWare
workstation execution program IPX.COM automatically.
2. Prepared IPX.COM
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
To simplify the installing procedure of shell driver,a ready
IPX.COM is included. It can be used for all settings of
NE2000 compatible mode. Re-generate IPX.COM or use DCONFIG
to re-configure IPX.COM if this value has to be changed.
CHAPTER 4
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Function Enhancement ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
The following items are functions enhanced by IPX driver.
Software Auto-configuration
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Installation procedure is very simple because all settings are set by
using DIAG. Driver will detect the configuration automatically and
operate properly. No jumper or parameter is necessary. Select assignments
by using SETUP.EXE. This function is useless for bridge/router. We offer
four fixed settings for every OS driver. It meet the specification
of maximum number for Novell's bridge/router. Please use configuration
type 6, 7, 8 or 9 when installing bridge/router.
Novell, NetWare, NE2000, NE1000, Novell Advanced NetWare are
registered trademarks of Novell Incorporated. Ethernet is registered
trademark of Xerox Corporation. Other marks mentioned here but
unintentionally omitted are trademarks or registered trademarks
of their respective companies.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.