1. VE20001.ZIP Driver
2. LANMAN.TXT File Contents

LANMAN.TXT Driver File Contents (VE20001.ZIP)

      MicroSoft LAN Manager installation with NE2000 Compatible NDIS driver
     -----------------------------------------------------------------------
                                for
        NE2000 Compatible EtherPair/EtherCoax Family LAN Adapter Driver
                 For MIcroSoft LAN Manager NDIS Environments


1. Installation Introduction for LAN Manager V2.0
--------------------------------------------------
 a. Type Setup In LanManager Directory. Press Enter.

 b. Press Enter.

 c. Choice "Import Network Drivers..." in "Action". Press Enter.

 d. Type the specific source driver. (A:\> or B:\>).

 e. Insert Driver Disk in specific drive. (A:\> or B:\>). Press Enter.
    Import Network Drivers appear.

 f. Press the SPACEBAR to select Network Adapter Card, "NE2000 Compatible
    Ethernet Adapter Card" . Press Enter.

 g. Press NO button.

 h. Press Enter three times.
    Network Driver appear.

 i. Choice NE2000 Compatible Ethernet Adapter Card in Network Adapter Cards
    select menu , then press <Add driver> button, and press <Add protocol>,
    press <OK>. Workstation Primary parameters appear,press <OK>.

 k. Press <OK> three times.

 l. Choice "Save" in "Action".

 m. Press F3 to Exit.

*******************************************************************************



2. Installation Introduction for LAN Manager V2.1
--------------------------------------------------
 a. Type lmsetup In LanManager Directory. Press Enter.
    Microsoft LAN Manger Setup appear.

 b. Choice "Network Drivers..." in " Configuration ". Press Enter.

 c. Choice <Add New Configs> ,press Enter.
    Network Adapter Driver appears.

 d. Choice <Other Driver> , press Enter.

 e. Insert the Driver Disk to specified drive (A:\> or B:\>),key in the specified
    drive (A:\> or B:\>),then push <ok> button.

 f. Select a available Network Adapter Driver, NE2000 Compatible
    Ethernet Adapter Card. Push <OK> button.

 g. Press the SPACEBAR to select the protocol what you want.

 h. Push <OK> button.
    Configuration Complete appear.

 i. Push <Save> button.

 j. Press "F3" to exit.

 k. Press Enter.

********************************************************************************

Sample configuration files:

3. Config.sys

   a.<V2.0>
      LASTDRIVE=Z
      BUFFERS = 35
      FILES = 35
      SHELL=C:\DOS50\COMMAND.COM C:\DOS50\e:1000 /p /E:1024
      DEVICE=C:\HIMEM.SYS
      DEVICE=C:\DOS50\SETVER.EXE
      DOS=HIGH,UMB

      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\ETHNE\ACCNE\ETHNE.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS


    b.<V2.1>
      LASTDRIVE=Z
      BUFFERS = 35
      FILES = 35
      SHELL=C:\DOS50\COMMAND.COM C:\DOS50\e:1000 /p /E:1024
      DEVICE=C:\HIMEM.SYS
      DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS
      DEVICE=C:\DOS50\SETVER.EXE
      DOS=HIGH,UMB

      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\ETHNE\ACCNE\ETHNE.DOS



4. Protocol.ini file for LAN Manager.

  a. V2.0
       [PROTOCOL MANAGER]
         DRIVERNAME = PROTMAN$

       [NETBEUI_XIF]
         Drivername = netbeui$
         BINDINGS = "ACCNE_NIF"

       [ACCNE_NIF]
       ; PROTOCOL.INI for NE2000 Ethernet Aadapter

           drivername = ETHNE$
       ;   irq = 3
       ;   iobase = 0x300

       ; End of this sample file



   b. V2.1
       [PROTMAN]
         DRIVERNAME = PROTMAN$
         DYNAMIC = YES
         PRIORITY = NETBEUI

       [NETBEUI_XIF]
         Drivername = netbeui$
         SESSIONS = 6
         NCBS = 12
         BINDINGS = "ACCNE_NIF"
         LANABASE = 0

       [ACCNE_NIF]
       ; PROTOCOL.INI for NE2000 Compatible ethernet adapter

           drivername = ETHNE$
       ;   irq = 3
       ;   iobase = 0x300

       ; End of this sample file



5. Autoexec.bat file for LAN Manager.

   a. V2.0

   @echo off
   PROMPT $P$G
   PATH=c:\PE2;C:\DOS50;C:\NC;
   APPEND=C:\PE2;C:\DOS50;
   REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES ===== LANMAN 2.0 ====
   SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
   C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND
   NET START WORKSTATION
   REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES ===== LANMAN 2.0 ====


   b. V2.1
   @echo off
   PROMPT $P$G
   PATH=c:\PE2;C:\DOS50;C:\NC;
   APPEND=C:\PE2;C:\DOS50;

   @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES === LANMAN 2.1 ===
   SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
   NET START WORKSTATION
   LOAD NETBEUI
   @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES === LANMAN 2.1 ===







How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.