3Com NDIS 2.01 driver installation notes for Banyan VINES client
To install VINES 5.0 software on a DOS NDIS workstation, follow these
instructions. DOS must be installed on the target workstation C: drive, or
you must have a bootable DOS floppy.
1. Use the DOS MD command to create a subdirectory called \VINES.
2. Copy the contents of the VINES LAN S/W (DOS) Install diskette into the
\VINES subdirectory.
3. Copy the contents of the NDIS subdirectory on the VINES LAN S/W (DOS) 2
of 2 diskette into the \VINES subdirectory.
4. Copy the PROTOCOL.INI fragment from the NDIS\DOS subdirectory on the
EtherDisk diskette to the \VINES subdirectory.
5. Edit the PROTOCOL.INI file to read as follows:
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[VINES_XIF]
DRIVERNAME = NDISBAN$
BINDINGS = ELINK59X
[ELINK59X]
DRIVERNAME = EL59X$
6. Run the PCCONFIG.EXE program located in the \VINES subdirectory.
7. Select option 1, Network Card Settings.
8. Select the NDIS Ethernet option.
9. The NDIS workstation screen appears. Enter the interrupt request
number (IRQ) that was used for the 3Com adapter. The interrupt number
can be determined by running the configuration and diagnostic utility
and choosing "view" and "adapter configuration (F8)".
10. Edit the CONFIG.SYS file and add the following lines. If a boot
diskette is being made, substitute A: for C: in the following lines.
DEVICE = C:\VINES\PROTMAN.DOS /I:C:\VINES
DEVICE = C:\VINES\EL59X.DOS
11. Add the BAN command to the AUTOEXEC.BAT file. BAN loads the NDISBAN
drivers and reads the PCCONFIG.DB file to invoke changes made during
the PCCONFIG stage.
%VER BANYAN.TXT - NDIS 2.01 Banyan client installation notes V 3.4b
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.