3Com Corporation
EtherDisk (R) Diskette For
The Fast EtherLink and EtherLink III (R) Bus Master Adapters
System Resources
Listed below are commonly used peripherals and their option settings. If any
of these peripherals are installed in your computer, check which resources
they are using and make sure that the software options on the EtherLink III
adapters are not set to use the same resources. Other peripherals not
mentioned in these lists could also cause conflicts.
I/O Base Address Device
---------------- ------
200-20F Game I/O adapter
230-23F Bus Mouse
270-27F LPT3: third parallel port
2F0-2FF COM2: second serial port
320-32F Fixed disk controller
370-37F LPT2: second parallel port
380-38F Monochrome display adapter
3B0-3BF LPT1: first parallel port
3C0-3CF EGA/VGA display adapter
3D0-3DF CGA display adapter (also EGA/VGA in color video modes)
3F0-3FF Floppy disk controller, COM1: first serial port
Interrupt Level Device
--------------- ------
3 COM2
4 COM1
5 LPT2
6 Floppy Disk Controller
7 LPT1
8 Real-Time Clock
9 EGA/VGA Display Adapter
11 SCSI Adapter
12 Bus Mouse
13 Math Coprocessor
14 Hard Disk Controller
(%VER System Resources v2.0d)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.