slabbus.inf Driver File Contents (pcr1500V2.10control.zip)

;*****************************************************************************
;
; slabbus.inf   -- Install the CP210x USB Composite Device drivers
;
; Copyright (c) 1997-2004 by MCCI 
;
; MCCI is a registered trademark of Moore Computer Consultants, Inc.
;
; NOTICE: This software is licensed, not sold.  Any modification of this
; inf file to change the reference to an operating system or to change the
; reference to a device is not permitted unless authorized in writing by
; Moore Computer Consultants, Inc..
;
;*****************************************************************************

[version]
signature="$CHICAGO$"
Class=USB
ClassGuid={36FC9E60-c465-11cf-8056-444553540000}
Provider=%Provider%
DriverVer=12/16/2004, 4.28.0.2700
;CatalogFile=slabbus.cat

[ControlFlags]
ExcludeFromSelect = *

;-----------------------------------------------------------------------------
; Specify target paths...
;-----------------------------------------------------------------------------
[DestinationDirs]
DefaultDestDir                  = 11                    ; LDID_SYS
SLABWdm.W95.CopyFiles       = 11                    ; LDID_SYS
SLABWdm.NT.CopyFiles        = 12                    ; system32\drivers
SLABWdm.NT.CopyFiles2        = 11                    ; system32
PropPages.CopyFiles             = 11                    ; system

;-----------------------------------------------------------------------------
; Specify the install disks.  A bit unwieldy during development.
;-----------------------------------------------------------------------------
[SourceDisksNames]
; diskid = description[, [tagfile] [, <unused>, subdir]]
1=%DiskString%,"slabbus.sys",,

[SourceDisksFiles]
; filename = diskid[, [subdir] [, size]]
slabbus.sys = 1
slabwh95.sys = 1
slabwhnt.sys = 1
slabunin2k.exe = 1
slabunME.exe = 1
slabunin.u2k = 1
slabunin.u98 = 1

;-----------------------------------------------------------------------------
; Table of Contents:  manufacturer, then devices.
;-----------------------------------------------------------------------------
[Manufacturer]
%SLAB%=SLAB

;-----------------------------------------------------------------------------
; The devices
;-----------------------------------------------------------------------------
[SLAB]
%SLAB.CdcBus.Desc% = SLABWdm.Install, USB\VID_10C4&PID_EA60

;-----------------------------------------------------------------------------
; How to install them:  On W9x, the [section] name is used directly.
; On NT, the system first tries [section.NT], then [section].
;-----------------------------------------------------------------------------

;-----------------------------------------------------------------------------
; Diagnostics Files CopyFiles List Section
;-----------------------------------------------------------------------------
[SLAB.CopyFiles]

;-----------------------------------------------------------------------------
; XXX when we have a property page DLL, add it to the following section.
;-----------------------------------------------------------------------------
[PropPages.CopyFiles]

;-----------------------------------------------------------------------------
;       How to install the WDM driver on W95/W98
;-----------------------------------------------------------------------------
[SLABWdm.Install]
DriverVer=12/16/2004, 4.28.0.2700
CopyFiles       = SLABWdm.W95.CopyFiles, SLAB.CopyFiles, PropPages.CopyFiles
AddReg          = SLABWdm.AddReg, SLABWdm.W95.AddReg, SLABWdmUnInst.Reg
RemoveDevice 	= SLABWdm.RemDev

;-----------------------------------------------------------------------------
;       How to install the WDM driver on NT
;-----------------------------------------------------------------------------
[SLABWdm.Install.NT]
DriverVer=12/16/2004, 4.28.0.2700
CopyFiles       = SLABWdm.NT.CopyFiles, SLABWdm.NT.CopyFiles2
AddReg          = SLABWdm.AddReg, SLABWdm.NT.AddReg, SLABWdmUnInst.NT.Reg


;-----------------------------------------------------------------------------
;       How to start the WDM driver on NT
;-----------------------------------------------------------------------------
[SLABWdm.Install.NT.Services]
AddService      = slabbus, 2, SLABWdm.AddService

[SLABWdm.AddService]
DisplayName             = %SLAB.Service.Desc%
ServiceType             = 1     ; SERVICE_KERNEL_DRIVER
StartType               = 3     ; SERVICE_DEMAND_START
ErrorControl            = 1     ; SERVICE_ERROR_NORMAL
ServiceBinary           = %12%\slabbus.sys
LoadOrderGroup          = Base

;-----------------------------------------------------------------------------
;       WDM registry entries (all platforms)
;-----------------------------------------------------------------------------
[SLABWdm.AddReg]


;-----------------------------------------------------------------------------
;       WDM registry entries (W95/98) (including how to start the driver)
;-----------------------------------------------------------------------------
[SLABWdm.W95.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,slabbus.sys

;-----------------------------------------------------------------------------
;       WDM registry entries (NT only)
;-----------------------------------------------------------------------------
[SLABWdm.NT.AddReg]

;-----------------------------------------------------------------------------
;       The WDM copy list for Win95 -- different because things go in
;       different places.  Also, we probably need to rename drivers 
;       during the install.
;-----------------------------------------------------------------------------
[SLABWdm.W95.CopyFiles]
slabbus.sys
slabwh.sys,slabwh95.sys
slabwh95.sys
slabwhnt.sys
slabunME.exe
slabunin.u98

;-----------------------------------------------------------------------------
;       The WDM copy list for NT -- different because things go in
;       different places.
;-----------------------------------------------------------------------------
[SLABWdm.NT.CopyFiles]
slabbus.sys
slabwh.sys,slabwhnt.sys
slabwhnt.sys

[SLABWdm.NT.CopyFiles2]
slabunin2k.exe
slabunin.u2k

;-----------------------------------------------------------------------------
;       The WDM uninstall list and registry entries -- 
;       
;-----------------------------------------------------------------------------

[SLABWdm.RemDev]
DELKEY=HKLM,%WINUN%\SLABCOMM&10C4&EA60

[SLABWdmUnInst.Reg]
HKLM,%WINUN%,"SLABCOMM&10C4&EA60"
HKLM,%WINUN%\SLABCOMM&10C4&EA60 , "UninstallString",,"%11%\slabunME.exe %11%\slabunin.u98"
HKLM,%WINUN%\SLABCOMM&10C4&EA60 , "DisplayName",,"CP210x USB to UART Bridge Controller"

[SLABWdm.DelFiles]
slabunin2k.exe = 1

;-----------------------------------------------------------------------------
;       The WDM uninstall list and registry entries for NT -- 
;       
;-----------------------------------------------------------------------------

[SLABWdmUnInst.NT.Reg]
HKLM,%WINUN%,"SLABCOMM&10C4&EA60"
HKLM,%WINUN%\SLABCOMM&10C4&EA60 , "UninstallString",,"%11%\slabunin2k.exe %11%\slabunin.u2k"
HKLM,%WINUN%\SLABCOMM&10C4&EA60 , "DisplayName",,"CP210x USB to UART Bridge Controller"

;****************************************************************************
; Localizable Strings
;****************************************************************************
[strings]

;BEGIN ENG - US English Strings
Provider = "Silicon Laboratories"
SLAB = "Silicon Laboratories"
DiskString = "IC-PCR1500/2500"
WINUN="Software\Microsoft\Windows\CurrentVersion\Uninstall"

SLAB.CdcBus.Desc = "CP210x USB Composite Device"
SLAB.Service.Desc = "CP210x USB Composite Device driver (WDM)"

CustomerDataPath = "CP210x USB to UART Bridge Controller"
DriverSet = "CP210x USB to UART Bridge Controller Software"


;END ENG - US English Strings

;-----------------------------------------------------------------------------
; Following are symbolic constants which don't change per locale.
;-----------------------------------------------------------------------------

;*** end of file ***
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.29