This set of programs is used to change the maximum bitrate of a comport (Fastcom:xxxx-PCI) "on the fly". It consists of three parts, a vxd driver (clockset.vxd), a dll that allows entry into the driver (fcputil.dll), and a command line program that uses the dll and driver to change the clock setting of the fastcom card. The fcset program can be used to change the bitrate of a port by using: usage: fcset comport maxbaud an example would be: fcset 5 230400 This would set the board that includes COM5 to use 230400bps as its maximum bitrate. Keep in mind that all other ports on the board that gets changed will have their bitrates modified as well. Also the change will not affect the settings shown in the serialgt.exe program, and the change will not persist across boots (a shutdown/restart will reset the maximum bitrate to whatever is specified in the serialgt.exe program). To change the bitrate and have it persist across boots you must use the serialgt.exe program. If you do not wish to use the fcset.exe example/utility, you can use the set_max_baud() function that the fcputil.dll exports in your code.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.