1. Wireless-bg_Notebook_Adapter.zip Driver
2. Language.ini File Contents

Language.ini Driver File Contents (Wireless-bg_Notebook_Adapter.zip)

[Tray]
TrayTipDefault=Linksys Configuration Utility
TrayTipInactive=is inactive
TrayTipNotInstalled=is not installed
TrayTipSignal=Signal
TrayTipQuality=Quality

[BasicSetting]
GMode1=Mixed Mode
GMode2=G-Only Mode

[Profile]
ProfileNew=Enter a name for the new profile.
ProfileSystem=This profile name is used by system. Enter another name.
ProfileExists=A profile with given name already exists. Replace it?
ProfileTooLong=Profile name should to be less than 32 characters.
ProfileCreate=Create connection profile
ProfileUpdate1=Really update profile
ProfileUpdate2=with current setting?
ProfileUpdate3=Update selected profile
ProfileDelete1=Are you sure you want to delete this profile?
ProfileDelete2=Delete selected profile
ProfileDelete3=Really delete profile
ProfileConnect1=The profile
ProfileConnect2=is missing or corrupted
ProfileConnect3=Connect with selected profile
ProfileNetworkSetting=Network Setting
ProfileWrongIP1=A valid IP address is necessary for this field.
ProfileWrongIP2=You have entered an incorrect IP address. Please try again.
ProfileImport1=A profile with the name
ProfileImport2=already exists. Replace it?
ProfileImport3=Import connection profile(s)
ProfileExport1=Please select a folder to export to.
ProfileExport2=Profile
ProfileExport3=already exists. Press OK to continue or Cancel to skip.
ProfileExport4=Export connection profiles
ProfileExport5=Please give a new name for profile
ProfileExport6=Successfully exported
ProfileExport7=profile(s)
ProfileExport8=No profile exported.
ProfileExport9=Export profile(s)
ProfileSummary1=Use DHCP

[LinkInfo]
LinkInfoInactive=Inactive
LinkInfoNotInstalled=Not installed
LinkInfoDeviceFailed=Failed to change device configuration.
LinkInfoConnecting=Connecting...
LinkInfoSettingNetwork=Setting Network...

[WEP]
WEP1=You have entered an incorrect WEP key. Please try again.
WEP2=The WEP key should be composed of %d hexadecimal characters ('0'~'9' or 'A' ~ 'F').
WEP3=The WEP key should be composed of %d alphanumeric characters.
WEP4=alphanumeric characters.
WEP5=Security Setting
WEP6=hexadecimal characters ('0'~'9' or 'A' ~ 'F').
WEP7=The passphrase is empty. Please give the passphrase.
WEP8=Disabled
WEP9=64 Bits
WEP10=128 Bits
WEP11=Open
WEP12=Shared

[SiteSurvey]
SiteSurvey1=Searching ...

[Status]
StatusConnect1=Connected
StatusConnect2=Disconnected
StatusConnect3=Authenticating
StatusConnect4=Waiting For Keys
StatusConnect5=Open Ad-Hoc
StatusConnect6=Open Unauthenticated
StatusConnect7=Funk Not Licensed.
StatusWirelessMode1=Ad-Hoc
StatusWirelessMode2=Infrastructure
StatusTxRate1=1 Mbps
StatusTxRate2=2 Mbps
StatusTxRate3=5.5 Mbps
StatusTxRate4=6 Mbps
StatusTxRate5=9 Mbps
StatusTxRate6=11 Mbps
StatusTxRate7=12 Mbps
StatusTxRate8=24 Mbps
StatusTxRate9=36 Mbps
StatusTxRate10=48 Mbps
StatusTxRate11=54 Mbps
StatusTxRate12=1 or 2 Mbps
StatusTxRate13=Auto
StatusWEPMode1=WEP
StatusWEPMode2=Off
StatusWEPMode3=N/A
StatusWEPMode4=WPA
StatusWEPMode5=WPA+Radius
StatusWEPMode6=Unknown
StatusEnable1=Enabled
StatusEnable2=Disabled
StatusStation1=Not Available
StatusStation2=Connected
StatusStation3=Authenticated
StatusStation4=Link Synchronized
StatusStation5=Scanning ...
StatusStation6=Disconnected
StatusStation7=Checking...
StatusLinkQuality1=No Signal
StatusLinkQuality2=Poor
StatusLinkQuality3=Good
StatusLinkQuality4=Very Good
StatusLinkQuality5=Excellent