W89C840F
Demo Program
Description:
1. System
.show node-id, port, irq, membase, ROM base (if available)
.select a desired card from serveral 840 cards
2. (Cxx) Control/Status register test
.registers read/write test
3. Loopback Test
.data structure test
4. Practical Tx/Rx Test
.receive test
.transmit test
.transmit and receive test
5. Set boot ROM size
Installation:
(1) 840-dm.exe, (2) 840-dm.ini, (3) cylu0.pkt, (4) fa50.pkt,
(5) digit.pkt, (6) dwio.scr,
6 files should exist in the local harddisk.
Use:
840-dm Run diagnosis program
840-dm /g[=file_specify] Generate NET.CFG as file_specify
840-dm /n Run diagnosis program
Trouble Shooting:
Histories of Release:
***) 1.00, 09-12-1997
First release.
***) 1.02, 12-19-1997
modify some user interface methods
***) 1.03, 12-23-1997
modify transmission method for 10M linespeed
***) 1.04, 02-17-1997
enhance functions.
***) 1.06, 07-24-1997
enhance functions.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.