W89C840A
Demo Program
Description:
1. System
.show node-id, port, irq, membase, ROM base (if available)
.select a desired card from serveral 840A cards
2. (Cxx) Control/Status register test
.registers read/write test
3. Loopback Test
.data structure test
4. Practical Tx/Rx Test
.receive test
.transmit test
.transmit and receive test
5. Remote Wake-Up Test
.transmit wake-up packets
.be the wakon card
6. Set boot ROM size
Installation:
1. (1) 840a-dm.exe, (2) 840a-dm.ini, (3) cylu0.pkt, (4) fa50.pkt,
(5) digit.pkt, (6) dwio.scr
6 files should exist in the same directory.
2. If the vendor wants to write Ethernet address to the EEPROM,
ETHADDR.DAT should also in the same directory.
Use:
840a-dm Run diagnosis program
840a-dm /g[=file_specify] Generate NET.CFG as file_specify
840a-dm /n Run diagnosis program
840a-dm /eeprom Write Ethernet Address (ETHADDR.DAT) and
other data (see [EEPROM] in 840a-dm.ini)
to the EEPROM.
Trouble Shooting:
Histories of Release:
***) 1.01, 03-08-1999
First release.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.