;************************************************************************************
;
; Touch Panel driver setting (MS-DOS)
;
;
; All rights reserved, Copyright(C)
; Fujitsu Takamisawa Component Ltd. 1995-2001
;************************************************************************************
1. Method of starting driver
(1) Connect the touch panel with PC, and start PC.
(2) Execute the driver with a driver name and the following parameters.
When the parameter is omitted, default is effective.
Details of parameter
1) I (IRQ number)
0x1 - 0xF (IRQ1 - IRQ15)
Default : I4 (IRQ4)
2) P (8250 I/O base address)
0x0 - 0xFFFF (0x0 - 0xFFFF)
Default : P3F8 (0x3F8)
3) B (baud rate)
B96 (9600bps), B48 (4800bps), B24 (2400bps)
Default : B96 (9600bps)
4) F (Beep Frequency)
F25 (37Hz) - F7FFF (32767Hz)
Default : F3E8 (1000Hz)
5) D (Length of Beep : Value*25msec)
D1 (25ms) - DFF (6375ms)
Default : D2 (50ms)
Example) medstd I4 P3F8 B96 S
(IRQ4, I/O base address 3F8, baud rate 9600bps, 800~600)
2. Method of starting calibration program
(1) Connect the touch panel with PC, and start PC.
(2) Execute the calibration program with a calibration program name and
the following parameters. When the parameter is omitted, default is effective.
Details of parameter
1) I (IRQ number)
0x1 - 0xF (IRQ1 - IRQ15)
Default : I4 (IRQ4)
2) P (8250 I/O base address)
0x0 - 0xFFFF (0x0 - 0xFFFF)
Default : P3F8 (0x3F8)
3) B (baud rate)
B96 (9600bps), B48 (4800bps), B24 (2400bps)
Default : B96 (9600bps)
4) H (Number of caribration points)
not setting (3*3= 9 points), H (5*4= 20 points)@
Default : not setting (3*3= 9 points)
5) C, T (caribration/Drawing test)
not setting (caribration and Drawing test), C (caribration only), T (Drawing test only)
Default : not setting (caribration and Drawing test)
6) S (Display)
not setting (VGA), S (SVGA)
Default : not setting (VGA)
Example) caldstd I4 P3F8 B96
(IRQ4, I/O base address 3F8, baud rate 9600bps, caribration and Drawing test, VGA)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.