1. sii3114.exe Driver
2. REDHAT_QUICK_INSTALLATION.txt File Contents

REDHAT_QUICK_INSTALLATION.txt Driver File Contents (sii3114.exe)

#######################################################################
#         Silicon Image SiI SATA controller                           #
#                     Linux  Driver				      # 
#######################################################################

1. OVERVIEW
   This driver disk adds support for the SiI SATA controller. This driver
   overrides the Open Source Driver

   Supported Versions:

      * RedHat Linux 8.0 , 9.0 and RH EL 3.0

2. CREATE FLOPPY

   dd if=sii6514.img of=/dev/fd0  (In a Linux System) 
      See Full Install if you want to use WINDOWS to create
          the floppy
      
   => Configure RAID SET using the BIOS if you want RAID functionality
   *  Make sure BIOS reports drives as 'current' (if using RAID)

3. INSTALL SOFTWARE

   . Insert Bootable CDROM

   . At boot prompt type 'linux dd'


   . Insert Floppy Containing the Driver and follow the installation instructions.

       * If you get Any Errors or 'hangs' before formatting the Disk Drives see Full Installation.
	 (type CTL-ALT-F4 and CTL-ALT-F5 to see errors, CTL-ALT-F1/F7 are main screens/menus)

   .  Some Installations may require to change the boot loader.  Run the script 
      below BEFORE REBOOTING.

       mkdir /f 
       mount /dev/fd0 /f 
       cd /f 
       ./update_bootloader.sh

       * This script assumes your boot disk is /dev/sda
         (first controller) See Full Install for details

NOTE:

   . To UPGRADE or to just add 'DATA' SATA disk drives see Full Install instructions.


4. GENERAL INFO

   . If you cat /proc/scsi/SiI6524/* you should see the Driver as reported by
     the kernel

   . If you cat /proc/scsi/scsi you should see the your RAID TYPE as reported
     by the kernel