SPORTident firmware for SI-stations BS7/BS8 ******************************************* PC-Software "SIBoot" 5.45, upload 2005-10-04 relation firmware - SI station ------------------------------ * 8115 BSF5 8117 BSF7 70.000 ... 70.521, 72.002...72009 8197 BSF7 71.000 ... 8198 BSF8 * 8187 BS7-SI-Master 8188 BS8-SI-Master 9197 BSM7-RS232, BSM7-USB 9597 BS7-S B197 BS7-P * B198 BS8-P B897 BS7-GSM * not in production >>> stations 8117 feature limited functionality based on smaller program memory from firmware 5.49, only "control" possible upload 2007-03-01 boot559 ---------------------------- firmware 5.59 improves stability of the SI-stations in case of higher discharged batteries; unstability of a SI-station results in higher power consumption; update is recommended for stations older than 2 years corresponding to consumption counter values of about 30% or higher upload 2006-05-17 boot556 ---------------------------- all general update 5.56 modified data structure in stations backup memory in extended mode Card-Readout (BSM7) compatible read mode (SI-C6) for SI-C8/9/p SI-Master higher accuracy in time synchronisation Printout-Station higher robustness when low battery effect in the thermal printer upload 2006-02-24 boot553 ---------------------------- all general update 5.53 real time clock accuracy improved by implementing temperature compensation SI-C6* implemented SI-Master inductive coupling sensitivity corrected upload 2005-11-24 ------------------ all general update 5.49 important error correction in the SI-Card5 handling at low temperatures there was a robustness problem for some production slots of SI-Cards5 the firmware error is in versions 5.4x; versions 5.3x are not affected all improved security when SI-stations are transported against real time clock reset all SI-Card8, SI-Card9, pCard handling implemented printout "Start"-Card for mass start handling upload 2005-08-08 ------------------ 9197 BSM7-RS232, BSM7-USB 5.44 improved robustness for SI-Card 5 reading upload 2005-06-27 ------------------ 9197 BSM7-RS232, BSM7-USB 5.43 B197 BS7-P 5.43 bugfix for stochastic read error SI-Card 5 additional flag for BSM7, BSP7: in modes "card readout" and "printout" stations can be locked against backup memory overflow upload 2005-05-11 ------------------ all general update 5.40 improved robustness for SI-Card reading SI-Card handling higher priorized data logging in SI stations backup memory improved error correction real time clock from version 5.39 upload 2005-04-05 ------------------ B197 BS7-P 5.38 BS7-P "print results" temporarily disabeled - error if a larger number of SI-cards is read in print layout configuration with better performance, SIPrint 5.38 (PC-Software) needed upload 2005-03-10 ------------------ 8115 BSF5 5.34 8117 BSF7 5.34 8188 BS8-SI-Master 5.34 8197 BSF7 5.34 8198 BSF8 5.34 9197 BSM7-RS232, BSM7-USB 5.34 B197 BS7-P 5.37 BSFx stations should have at least 5.33, BSMx stations should have at least 5.34 5.37 all correction: read out backup memory BS7-P extension: "print results" correction: printer control, print layoutDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.