INSTALL.TXT Driver File Contents (Monitor_Likom_Driver.exe)

This file describes normal monitor installation procedures for
Windows 95.  Use these procedures when installing Likom monitors.

Plug & Play (DDC) monitor INSTALLATION PROCEDURE
      If your dispaly adapter and driver support Plug & Play
      the DDC monitor will be automatically detected and installed
      as a "VESA DDC compatible monitor" by Windows 95 at startup.
      If it is not, then follow the procedure for manual installation below.
      
MANUAL MONITOR INSTALLATION PROCEDURE
     
     1. Click the "Start", point to the menu "Settings", then click 
        the "Control Panel".
     2. In the "Control Pannel" windows, double click the "Display" icon.
     3. In the "Display Properties" windows, click the "Settings" tab
     4. Click the  "Advanced Properties" button.
     5. In the "Advanced Display Properties" windows, click the "Monitor" tab
     6. Click the "Change..." button
     7. Click the "Have Disk..." button on the "Select Device" window.
     8. Specify the path to the INF file and press the <ENTER>
        key:

          Example 1: Insert the disk in the A: floppy drive,
                     and enter A:\.

          Example 2: Type in the name of the directory where you copied
                     the INF file, either on your local hard drive or
                     on a network share.

          Example 3: If you're not sure exactly where the INF file is,
                     choose the "Browse..." button are find them.
     9. Click "OK" button then back to the "Select Device" window.
    10. Click on the "Show All Devices" in "Select Device" window.
    11. Select your monitor model from the list and then click "OK"
    12. Click the "Close" button on the "Advanced Display Properties" to return 
        to "Display Properties"
    13. If system pop-out a "Refresh Rate" message box, click on the "OK" button
    14. Click on the "OK" button from the "Display Properties" windows to finish
        the monitor setting.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.06