1. 9003-install.zip Driver
2. usrdev.ini File Contents

usrdev.ini Driver File Contents (9003-install.zip)

;------------------------------------------------------------------------------------
; USRDEV.INI
;
; Copyright 2002 U.S. Robotics, Corp.
;
; Contains customization parameters for the U.S. Robotics ADSL Router.
; Modified by Danut T, 04/16/02
;------------------------------------------------------------------------------------

[SystemInfo]		
				;Specifies BRIDGE or ROUTER mode
BridgeOrRouter=ROUTER

ManagementIp=192.168.1.1
				; IP of management page

				; Specifies if installer in Quick Mode (1: Quick Installer, else Manual mode)
QuickInstaller=0
				; Specifies the ISP section name for the Quick Installer.
QuickInstallSectionName=IspWanadoo
	
				; Specifies the Title Image File Name for QuickInstaller. This File should be posted in "Images" sub directory
QuickInstallTitleImageFile=FTbanner.bmp

				; Modem PnP ID
ModemId=USB\VID_0BAF&PID_00FB

IPAdress=
				; For ethernet
	
				; If 1, the Setup will check if the USB has been plugged in, and will stop install if yes.
CheckUSBPlugAtStart=0

				; Hadware type: forced to ETHERNET or USB, or USER to manually select
HardwareType=USER

				; If 1, the ISP selection screen will be skipped (use Default), and if 0, it will be shown.
SkipIspSelectionScreen=0
				; If 1, welcome screen will be skipped.  If 0, it will be shown.
SkipWelcomeScreen=0
				; If 1, license agreement screen will be skipped.  If 0, it will be shown, and will use the license.txt 
SkipLicenseScreen=1
				; If 1, system inspect result screen will be skipped. If 0, it will be shown.
SkipSystemInspectResult=0
				; If 1, the summary screen will be skipped, and if 0, it will be shown.
SkipSummaryScreen=0
				; If 1, the finished screen will be skipped, and if 0, it will be shown.
SkipFinishScreen=0
				; 1 if setup will use USRobotics specific screens, 0: Installshield standard screens
USRDialogScreen=1
				; Specify the minimum limit (in Bytes) for RAM to allow installation.
RamLimit = 32000
				; Specify the minimum limit (in MBytes) for Disk Space to allow installation.
SpaceLimit = 10

				;RunPPPoeClient
				;--------------
				;Specifies if a PPPoE Client Installer has to be run at the end of the installation
				;If an empty sting is specified, no action is performed
				;Otherwize, this field should provide the name of an executable file, with directory indication,
				; from the Installer root directory.
RunPPPoeClient=
;RunPPPoeClient=0