U.S. Robotics U.S. Robotics 10/100 PCMCIA NIC TX Windows 2000 Driver Installation Windows 2000 provides a complete "Plug and Play" System that automatically recognizes and configures U.S. Robotics 10/100 PCMCIA NIC TX. Before installing the U.S. Robotics 10/100 PCMCIA NIC TX adapter, Windows 2000's PCMCIA service must be installed and enabled. This service can be started in the Control Panel. Driver Installation Steps for Windows 2000: 1) Insert U.S. Robotics 10/100 PCMCIA NIC TX in one of the PCMCIA Slots and start Windows 2000. 2) The "Found New Hardward Wizard" dialog box appears. Click the "Next" button. 3) Select "Search for a suitable driver for my device (Recommended)", then click "Next" button. 4) Insert the U.S. Robotics 10/100 PCMCIA NIC TX driver diskette in the drive (e.g. X:). Type "X:\WIN2000", select "Specify a location", then click the "Next" button. Notice: X: means the drive (Floppy or CD-ROM) containing the driver. 5) Windows will find driver installation file in the specified location, click "Next" button. 6) The installation process copies all the required files to the hard disk. Please wait for the process to finish. 7) Click "Finish" to complete the installation process. Note: When Windows 2000 and the Network is up and running, it is not recommended to remove the U.S. Robotics 10/100 PCMCIA NIC TX adapter from the PCMCIA slot without telling the system first. Before you remove the adapter, please follow these steps: 1) Double click on the My Computer icon, and then double click on the Control Panel icon. 2) Double click on the PCMCIA icon. The "PC Card (PCMCIA) Properties" window appears. 3) Select "U.S. Robotics 10/100 PCMCIA NIC TX" from the list, and then click the Stop button. 4) Wait until the message box with the "You may safely remove the device" message appears. Click OK. 5) Remove the U.S. Robotics 10/100 PCMCIA NIC TX adapter from the PCMCIA slot. If you do not follow these steps and just pull the adapter from the PCMCIA slot, the system may hang and you have to reboot the system.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.