U.S. Robotics U.S. Robotics 10/100 PCMCIA NIC TX Linux Driver Installation Installation Guide: 1. Please download the pcmcia package (3.1.29 or higher vision) from the follow url: ftp://www.sunsite.unc.edu/pub/Linux/kernel/pcmcia 2. Install the package: Copy the pcmcia packagefile into /usr/src/linux/ and uncompress it: tar zxvf pcmcia-cs-3.1.29.tar.gz 3. Config the pcmcia package Change the directory into pcmcia cd pcmcia-cs-3.1.29 then config and install it make config make install 4. Edit the /etc/pcmcia/config Add following to the config file device "U.S. Robotics 10/100 PCMCIA NIC TX" class "network" module "pcnet_cs" please add the following configuration: card "U.S. Robotics 10/100 PCMCIA NIC TX" version "U.S. Robotics" , "10/100 PCMCIA NIC TX", "0", "0" bind "pcnet_cs" 5. Restart the pcmcia service /etc/rc.d/init.d/pcmcia restart Then the U.S. Robotics 10/100 PCMCIA NIC TX adapter will start to work.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.