******************************************************************* * U.S. ROBOTICS CORPORATION * * U.S. Robotics 10/100 PCI NIC TX * * SOFTWARE DRIVER RELEASE DISKETTE * * * * COPYRIGHT 2003 U.S. ROBOTICS CORPORATION. * * All Rights Reserved. * * * * V1.00 01-07-2003 * ******************************************************************* Introduction ------------ Thank you for purchasing the U.S. Robotics 10/100 PCI NIC TX adapter. The adapter card has been developed by combining the latest 100BASE-TX Fast Ethernet technology and peripheral component interface (PCI) local bus technology. Additionally,this adapter supports Wake-on-LAN feature in Windows 98SE, ME, 2000, and XP allowing the system with a adapter card to be remotely configured. This adapter card supports PCI rev 2.1 systems which requires a 3-pin connector for system wake-up as well as PCI rev 2.2 system which can be awakened by the PME# signal on the PCI bus. There are two protocol boot rom supported. PXE and RPL protocol. For example, PXE for Winnt4.0, Windows 2000 and RPL for Novell 4.1x & 5.0 RPL Server When the system boot, press <shift> + <F10> to change the mode of bootstrap. Getting Started --------------- Refer to the individual documentation provided in the \HELP directory. Trademarks ---------- Novell and NetWare are registered rademarks of Novell, Inc. NetWare Client, NetWare DOS Requested, Novell DOS, Personal NetWare, and ODI are trademarks of Novell, Inc. Microsoft, Microsoft Windows, Windows 95, Windows98, Windows NT, Windows 2000 and Windows ME are registered trademarks of Microsoft Corporation.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.