NDIS.TXT Driver File Contents (usr7900.zip)

***********************************************************************
*                      U.S. ROBOTICS CORPORATION                      *
*                  U.S. Robotics 10/100 PCI NIC TX                    *
*                     NDIS 2 Driver Installation                      *
*                                                                     *
*               COPYRIGHT 2001 U.S. ROBOTICS CORPORATION              *
*                        All rights reserved.                         *
***********************************************************************

The drivers you need are in the directories MSLANMAN.DOS, MSLANMAN.OS2 and
NDIS2.  The NDIS drivers contained in these subdirectories are used with
Microsoft LAN Manager.  The driver can also used with IBM LAN Server 3.0, 
Microsoft Windows for Workgroups v3.11, etc.

The drivers named USR7900 conform to the Network Driver Interface
Specification (NDIS) defined by Microsoft/3Com.

Included in MSLANMAN.DOS, and NDIS subdirectories are the following files:

\MSLANMAN.DOS\DRIVERS\USR\USR7900\

        USR7900.DOS              The DOS NDIS MAC driver
        PROTOCOL.INI             A sample section of PROTOCOL.INI file

\MSLANMAN.DOS\DRIVERS\NIF\

        USR7900.NIF              Network Information File

\NDIS2\

        NDIS.TXT                 This readme file

\NDIS2\DOS\

        USR7900.NIF              Network Information File for IBM Lan Support Program
        USR7900.DOS              The DOS NDIS 2 driver
        OEMSETUP.INF             Network Information File for Windows for Workgroups v3.11
        PROTOCOL.INI             A sample section of PROTOCOL.INI file


Sample PROTOCOL.INI Files and Parameters
----------------------------------------
[ETHPCI_NIF]

  DriverName = USR7900$
; Slot = 1            ;; {1-4}
; MEDIA = AUTODETECT
; {MEDIA = UTP, UTP_FD,UTP_100,UTP_100FD,AUTODETECT}

There are several parameters included in the ETHPCI_NIF section of the
PROTOCOL.INI file. However, the only parameter that you should specify
is the "drivername."

If you change other parameter settings, such as the MEDIA, make sure
that it matches the hardware setting.  Otherwise, the adapter may fail.

If you don't specify these settings, U.S.Robotics USR7900'S
NDIS 2 driver will automatically detect them.


SLOT      Specifies which network adapter is used by the driver. If you have
          only one U.S.Robotics 10/100 PCI NIC TX in your
          machine, this parameter is unnecessary!  For two or more U.S.Robotics
          10/100 PCI NIC TX, this parameter is required and cannot be omitted from 
          PROTOCOL.INI. For the first USR7900 adapter, Slot=1, and the second one, Slot=2, 
          etc.

MEDIA     Specifies the medium type used by the adapter.
          Acceptable values for this parameter are AUTODETECT, UTP, UTP_FD,
          UTP_100 and UTP_100FD. If you do not specify this setting, it
          would be AUTODETECT for USR7900.

            UTP:        10BaseT
            UTP_100: Fast Ethernet (100BaseTx)
            UTP_FD:     10BaseT with Full_Duplex
            UTP_100FD:  100BaseTx with Full_Duplex
            Default:    AUTODETECT

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.98